Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 50K potentiometer module with an integrated knob and built-in switch, mounted on a small board for audio and DIY electronics projects. It lets you add adjustable volume control and on/off switching to a build without wiring a bare potentiometer by hand.

Key Highlights

  • 50K rotary potentiometer with adjustable knob
  • Built-in switch function for on/off control
  • Compact board measuring 35 x 26 x 15 mm
  • Lightweight at only 11 g
  • Suited to amplifier volume control and DIY builds
  • Stable performance with a long service life

Ideal For

  • DIY audio builders making small amplifiers
  • Electronics hobbyists prototyping control panels
  • Makers adding a panel-mounted volume control
  • Students learning about potentiometers and voltage dividers
  • Repairers replacing a volume control in a compact device

Buying Tip

Confirm that a 50K value suits your circuit and that the 35 x 26 x 15 mm board and knob will fit your enclosure before ordering.

Elecvora expert review

Our verdict

A tidy, inexpensive module that saves the fiddly work of mounting a bare potentiometer and knob. The built-in switch is a genuinely useful extra for compact builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Knob and board included, so no separate mounting hardware
  • Built-in switch adds on/off control at the same point
  • Small and light enough for tight enclosures
  • Common 50K value suits many audio and signal tasks

Cons

  • Not intended for controlling significant power directly
  • Requires soldering or connectors to install
  • Actual product may vary slightly from the image shown

Best for

DIY audio and small electronics builds needing a panel volume control

Not ideal for

Switching or regulating high-power loads

Specifications

ManufacturerGeneric
Model No. / NameXH-A954
Size (mm)35mm*26mm*15mm
Weight (g)11
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x XH-A954 Potentiometer Module

Frequently Asked Questions

What is the resistance value of this module?
It uses a 50K potentiometer, as stated in the product features.
Does it need its own power supply?
No. It is a passive component and draws no supply of its own; it works within the circuit you connect it to.
What does the built-in switch do?
It provides an on/off function alongside the rotary adjustment, so one control point can handle both tasks.
Can I use it to control a high-power device directly?
It is intended for low-power signal work such as volume control, not for switching or regulating significant power.
What are the dimensions and weight?
The board measures 35 x 26 x 15 mm and weighs approximately 11 g.
What is included with the module?
One XH-A954 Potentiometer Module, supplied as shown in the product image.

Overview

The Generic XH-A954 is a potentiometer module that packages a 50K rotary potentiometer, a turning knob, and a built-in switch onto one small board. Instead of soldering a bare three-terminal component and finding a way to mount a knob, you get an assembled unit that is ready to wire into a project. The board measures 35 x 26 x 15 mm and weighs about 11 g, so it fits neatly into small enclosures and panel cutouts.

At its core the module works as an adjustable voltage divider, the same principle behind everyday volume controls. Turning the knob changes the resistance between the terminals, which in turn adjusts signal level. The added switch function means the same control point can also turn a circuit on or off, which is handy when space on a front panel is limited.

Key Features

  • 50K potentiometer: a common value for audio and general signal-level adjustment.
  • Knob included: the rotary knob is fitted for direct hand adjustment.
  • Built-in switch: adds on/off control alongside the variable resistance.
  • Compact footprint: 35 x 26 x 15 mm keeps the module out of the way inside a build.
  • Lightweight: at roughly 11 g it adds almost nothing to the finished device.
  • Stable performance: designed for consistent operation and a long service life.

Specifications Explained

The 50K value describes the potentiometer's resistance range and is a practical choice for line-level audio and low-power signal work. The three-terminal layout lets you use it as a voltage divider or, by ignoring one end terminal, as a variable resistor. The built-in switch is separate from the resistance track, so it can control power or mute a signal path without affecting the adjustment range.

The stated size and weight matter for panel building: check that 35 x 26 x 15 mm clears your enclosure walls and that the knob has room to turn. Because this is a module rather than a bare pot, the connections are brought out on a board, which simplifies wiring and mounting.

Compatibility and Requirements

The module is a passive component and needs no power supply of its own; it works within the circuit you connect it to. It is intended for low-power signal applications such as volume control, not for switching or regulating significant power directly. You will need suitable wire and a soldering iron or connectors to integrate it, and a matching cutout in your enclosure for the knob.

Typical Uses

  • Volume control on small audio amplifiers and DIY speaker builds
  • Signal-level adjustment in test and prototyping setups
  • Position or setting adjustment in custom control panels
  • General electronics projects needing an adjustable resistor with a switch

What's in the Box

1 x XH-A954 Potentiometer Module, supplied as shown in the product image.

Quick specs

Manufacturer
Generic
Model No. / Name
XH-A954
Size (mm)
35mm*26mm*15mm
Weight (g)
11
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications