
1 / 4 · Click to enlarge
At a glance
This digital voltage, current and frequency meter is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Wattmeter; voltage rating 4.8 to 60VDC; rated current (a) 100. Check that your power source supplies 4.8 to 60VDC before connecting it.
Key Highlights
- Model No. / Name: Wattmeter
- Voltage Rating: 4.8 to 60VDC
- Rated Current (A): 100
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Wattmeter |
|---|---|
| Voltage Rating | 4.8 to 60VDC |
| Rated Current (A) | 100 |
| Material | Rubber Paint |
| Length (mm) | 85 |
| Width (mm) | 50 |
| Weight (g) | 80 |
| Color | Blue |
| Shipping Weight | 0.084 kg |
| Shipping Dimensions | 12 × 8 × 4 cm |
Overview
The 100A High Precision WATT Meter And Power Analyzer Module is listed in our digital voltage, current and frequency meter range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Wattmeter
- Voltage Rating: 4.8 to 60VDC (match this to your power supply; too high a voltage can damage the part)
- Rated Current (A): 100 (your supply must deliver at least this much current)
- Material: Rubber Paint (affects weight, heat handling and how the part wears)
- Length (mm): 85 (measure your mounting space before ordering)
- Width (mm): 50 (measure your mounting space before ordering)
- Weight (g): 80 (important for drones, RC models and anything you carry)
- Color: Blue
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is the all-in-one meter as it is capable of measuring 8 electrical parameters!!! Perfect... The 100A High Precision Watt Meter And Power Analyzer Module are designed to be safe in systems using less than 60 V and carrying currents up to 100 A.
It measures 8 parameters so serves as a key to electric power safety & performance. Measuring Voltage (V), Current (A), Power (W), Capacity (Ah), and Energy (Wh), Minimum Voltage (Vm), Peak Current (Ap), and Peak Power (Wp).
A wattmeter is an essential tool for any drone builder. It will enable you to measure and monitor the performance of your motor/ESC/battery, and the electrical throughput/consumption of your powertrain. With this information, you'll be able to select the most efficient prop/motor/ESC combination and more importantly, hopefully, avoid damaging your components before you go out to fly! If the wattmeter saves you just one motor or ESC, then it has paid for itself.
The meter features self-powering for measuring source, so you don't need to worry about an additional power supply. It features 100amps and operational from 4.8-60V (0V with optional auxiliary battery input).
The meter is also easy to use, in fact, it doesn’t have a single button so there is nothing to set up. Values for Current (A), Voltage (V) and Power (W) are shown in real time, while Peak Amps (Ap), Peak Watts (Wp), Voltage Minimum (Vm). Also, Amp-hours (Ah) and Watt-hours (Wh) are shown sequentially every two seconds on a continuous cycle. These ‘data values’ (Ah, Wh, Ap, Vm, Wp) are reset on power up.
Examples of uses:
- How Much Power Does my Fridge Use - with the Battery connected to the SOURCE side and Car Fridge (or other accessories) connected to the LOAD side. The Watt Meter shows the current into the Fridge, voltage, and power at the battery and accumulates the Ah and Wh while the fridge is running.
- How much charge is going into my battery - With a battery charger (or alternator) on the SOURCE side and the aux battery on the LOAD side, the Watt Meter shows the charging current into the battery, the voltage and charging power at the battery and accumulates the charge (Ah) and energy (Wh) into the battery.
- What is the output of my solar panel - With a solar panel on the SOURCE side and solar regulator on the LOAD side, the Watt Meter shows the charging current into the regulator, the voltage and charging power at the solar panel and accumulates the charge (Ah) and energy (Wh) into the regulator.
- How much charge is my solar panel putting into my battery - Now with a solar regulator on the SOURCE side and battery on the LOAD side, the Watt Meter shows the charging current into the battery, the voltage and charging power at the regulator and accumulates the charge (Ah) and energy (Wh) into the battery.
Measures :
- Voltage: ( 0 )V - 4V, - 60V 0.01V ( Resolution )
- Current: 0 - 100 A, 0.01A ( Resolution )
- Power: 0 - 6554 W, 0.1W ( Resolution )
- Charge: 0 - 65 Ah, 0.001Ah ( Resolution )
- Energy: 0 - 6554 Wh, 0.1 Wh ( Resolution )
Features :
- To measure the actual values of current (A), voltage (V) and power (W).
- Ensure peak currents are within tolerance for your power system.
- Check battery health and performance.
- Evaluate R/C battery charging efficiency.
- Assist with the correct selection of propellors and test efficiencies.
- Check for wiring and connector power losses.
- To verify the operating voltage of your flight pack under load and measure the quantity of charge drawn from the flight.
Package Includes :
1 x 100A High Precision WATT Meter And Power Analyzer Module.
1 x User Manual.
Quick specs
- Model No. / Name
- Wattmeter
- Voltage Rating
- 4.8 to 60VDC
- Rated Current (A)
- 100
- Material
- Rubber Paint
- Length (mm)
- 85
- Width (mm)
- 50














