Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A plug-and-play USB tester that displays live voltage and current draw for any USB port, up to 3A and 3.5-7VDC. It alternates between the two readouts so you can spot weak chargers or heavy loads in seconds.

Key Highlights

  • Inline USB tester displays voltage and current draw
  • Voltage range 3.5 to 7VDC, rated current up to 3A
  • Alternates between voltage and current readouts
  • No external power supply needed, plug and play
  • Compact ABS body, 53mm long and 15g
  • Blue housing with clear digital display

Ideal For

  • Electronics technicians testing USB chargers and cables
  • Makers and hobbyists debugging USB-powered projects
  • Repair shops checking current draw on phones and gadgets
  • Laboratory and factory staff doing quick USB port checks
  • Anyone comparing charger and cable performance at home

Buying Tip

Check that the port and device you plan to test stay within 3.5-7VDC and 3A, since the module is rated for that range only.

Elecvora expert review

Our verdict

A simple, affordable inline tester that gives you voltage and current at a glance without any setup. It is not a lab instrument, but for quick checks on chargers, cables and USB projects it does the job well.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No external power or software needed
  • Reads both voltage and current on one display
  • Very compact and light at 15g
  • Rated to 3A for common USB loads

Cons

  • Alternating readout means you cannot see both values at once
  • Limited to 3.5-7VDC and 3A, so no high-power testing
  • Unbranded build with no calibration data supplied

Best for

Quick voltage and current checks on USB chargers, cables and low-power projects

Not ideal for

High-power USB PD testing or precision laboratory measurement

Specifications

Model No. / NameVoltmeter, Ammeter
Voltage Rating3.5 to 7VDC
Rated Current (A)3
MaterialABS
Length (mm)53
Width (mm)20
Weight (g)15
ColorBlue
Shipping Weight0.018 kg
Shipping Dimensions6 × 3 × 2 cm

What's in the box

  • 1 x USB Charger Doctor (Voltmeter Ammeter module)

Frequently Asked Questions

What does the USB Charger Doctor measure?
It measures the input voltage and the current draw of a USB port and the device connected to it, showing the values on its digital display.
Do I need a separate power supply?
No. The module is powered by the USB port it is plugged into, so there is nothing else to connect.
What voltage and current can it handle?
It is rated for 3.5 to 7VDC input and up to 3A of current.
How do I see both readings?
The display alternates between voltage and current, so watch it for a moment to catch both values.
What is included in the package?
The package contains one USB Charger Doctor voltmeter and ammeter module.
How should I store it?
Keep it dry and avoid pulling on cables while it is plugged in; the ABS body is light, so store it where it will not be crushed.

Overview

The USB Charger Doctor is a compact inline module that plugs between a USB port and a USB-powered device. Once connected, it reads the working voltage and the current being drawn, then alternates between the two values on its digital display so you can watch both without touching a dial. There is no separate power supply and no software to install, so it works as soon as it is inserted.

At 53mm long and 15g, it is small enough to leave in a drawer or tool pouch and reach for whenever a charger, cable or device behaves unexpectedly.

Key Features

  • Measures input voltage from 3.5 to 7VDC
  • Rated for current up to 3A
  • Digital display alternates between voltage and current
  • Plug-and-play design with no additional power source
  • ABS housing in blue, 53mm by 20mm, 15g

Specifications Explained

Voltage range

The 3.5 to 7VDC input range covers standard USB power levels, so the module can sit inline with most USB ports and USB-powered projects while reporting the actual supply voltage at that point.

Current rating

A 3A rated current gives headroom for checking how much a device pulls from a port. Watching the current figure helps you see whether a charger is keeping up or whether a load is heavier than expected.

Alternating readout

Because the display switches between voltage and current, one small module gives you both numbers without extra instruments or a second connection point.

Size and material

The ABS body measures 53mm long and 20mm wide and weighs 15g, so it adds very little length and weight to a cable run.

Compatibility and Requirements

The module is designed for USB ports and USB-powered devices operating within the 3.5 to 7VDC range and drawing no more than 3A. It plugs directly between the port and the device, with no additional power supply required.

Typical Uses

  • Checking the output voltage of a PC USB port, wall charger or car charger
  • Comparing current draw between different cables and devices
  • Debugging battery chargers and boost converter setups
  • Monitoring USB-powered projects on the bench
  • Routine testing in workshops, laboratories and at home

What's in the Box

  • 1 x USB Charger Doctor (voltmeter and ammeter module)

Quick specs

Model No. / Name
Voltmeter, Ammeter
Voltage Rating
3.5 to 7VDC
Rated Current (A)
3
Material
ABS
Length (mm)
53
Width (mm)
20
See all specifications