
1 / 3 · Click to enlarge
AI Summary
This 100uF 25V through-hole electrolytic capacitor features a 6x7mm radial case and operates from -40°C to 105°C. Its standard footprint and 20% tolerance make it a practical choice for repair, prototyping, and general electronics work.
Key Highlights
- 100uF capacitance with 20% tolerance
- 25V DC voltage rating for common circuits
- Through-hole radial mounting for secure PCB fit
- 6.3mm diameter x 8mm length compact body
- Operating temperature range -40°C to 105°C
- Ideal for filtering, coupling, and decoupling
Ideal For
- Electronics hobbyists building or repairing circuits
- Students learning about through-hole components
- Technicians recapping power supplies or audio gear
- Makers prototyping on breadboards or PCBs
Buying Tip
Check the lead spacing and polarity markings on your PCB before soldering, and consider ordering spares since electrolytic capacitors can degrade over time.
Elecvora expert review
Our verdict
This Generic 100uF 25V electrolytic capacitor offers standard specifications and a compact radial package, making it a dependable choice for everyday electronics tasks. It is not a premium low-ESR part, but it handles general-purpose filtering and coupling well.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide temperature range up to 105°C
- Compact 6x7mm size fits tight spaces
- Standard through-hole mounting for easy soldering
- 20% tolerance is acceptable for most non-critical applications
Cons
- Not specified as low-ESR or high-reliability
- Polarized design requires careful orientation
- Single unit package may not suit volume production
Best for
General-purpose repair, prototyping, and educational projects
Not ideal for
High-frequency or precision analog circuits requiring low-ESR capacitors
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 100uF |
| Tolerance (%) | 20 |
| Voltage Rating (V) | 25 |
| Operating Temperature (°C) | - 40 ~ 105 |
| Mounting Type | Through Hole |
| Length (mm) | 8 |
| Width (mm) | 6.3 (body diameter) |
| Weight (g) | 380 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 100uF 25V Through Hole 6x7 Electrolytic Capacitor
Frequently Asked Questions
Is this capacitor polarized?
What is the lead spacing?
Can I use this capacitor at 24V?
What is the operating temperature range?
How many capacitors are included?
Is this capacitor suitable for audio applications?
Overview
The Generic 100uF 25V Through Hole Electrolytic Capacitor is a radial-lead component built for printed circuit board mounting. It provides a capacitance of 100 microfarads with a tolerance of ±20%, and is rated for 25 volts DC. The compact 6.3mm diameter by 8mm length body allows it to fit into tight spaces while still offering a respectable capacitance value. This capacitor is a workhorse component found in power supplies, audio circuits, and many other electronic designs where energy storage or signal filtering is required.
Key Features
- 100uF capacitance: Suitable for smoothing power rails and coupling signals.
- 25V voltage rating: Handles common low-voltage applications with margin.
- Through-hole mounting: Leads are inserted through PCB holes and soldered for a strong mechanical bond.
- Wide temperature range: Operates reliably from -40°C to 105°C, covering most environments.
- Compact size: 6.3mm diameter and 8mm length make it easy to place in dense layouts.
- 20% tolerance: Standard tolerance for general-purpose electrolytic capacitors.
Specifications Explained
Capacitance (100uF): This value determines how much charge the capacitor can store. 100uF is a common value for filtering low-frequency noise and providing local energy storage in power supplies. Voltage Rating (25V): The maximum DC voltage the capacitor can handle continuously. It is important not to exceed this rating in your circuit. Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal value, which is typical for electrolytic capacitors and acceptable in most applications. Operating Temperature (-40°C to 105°C): The capacitor can operate safely across a broad range, making it suitable for outdoor or industrial environments. Mounting Type (Through Hole): The leads are designed to pass through holes in a PCB and be soldered on the opposite side, providing a robust connection.
Compatibility and Requirements
This capacitor requires a printed circuit board with a 6x7mm footprint (2.5mm lead spacing is typical for this size, but always verify your layout). It is a polarized component, so correct orientation is essential: the longer lead is positive and the stripe on the body indicates the negative side. Soldering equipment is required for installation. No additional accessories are included.
Typical Uses
Common applications include power supply filtering, audio coupling, decoupling in digital circuits, and general-purpose timing circuits. It is also frequently used in DIY electronics projects, repair and recapping work, and educational kits. Because of its 25V rating, it is well-suited for circuits operating at 12V, 15V, or 24V rails.
What's in the Box
Package includes: 1 x 100uF 25V Through Hole 6x7 Electrolytic Capacitor. Note: The source description mentions a pack of 1000, but the package contents list only one capacitor. Please verify quantity before ordering.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 100uF
- Tolerance (%)
- 20
- Voltage Rating (V)
- 25
- Operating Temperature (°C)
- - 40 ~ 105
- Mounting Type
- Through Hole











