Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 100uF 450V electrolytic capacitor is a radial through-hole component for power supply smoothing and filtering. Its 450V rating and 20% tolerance make it suitable for a wide range of DC applications.

Key Highlights

  • 100uF capacitance with 450V DC voltage rating
  • Radial through-hole mounting for secure PCB installation
  • 20% capacitance tolerance for general-purpose use
  • Operates from -40°C to 80°C
  • Compact 30mm length and 18mm width
  • Lightweight at approximately 4 grams each

Ideal For

  • Electronics hobbyists building power supplies
  • Repair technicians fixing consumer devices
  • DIY enthusiasts working on DC-DC converters
  • Industrial maintenance professionals
  • Students learning about capacitor applications

Buying Tip

Check the physical space on your PCB and confirm the 30mm length and 18mm width will fit before ordering.

Elecvora expert review

Our verdict

This 100uF 450V electrolytic capacitor delivers standard performance for general-purpose power supply filtering. Its through-hole design and wide temperature range make it a dependable choice for repairs and DIY projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 450V voltage rating for demanding circuits
  • Radial through-hole mounting for secure connections
  • Wide operating temperature range
  • Compact size for tight spaces

Cons

  • Polarized, so incorrect installation can damage the capacitor
  • Capacitance tolerance of ±20% may not suit precision applications

Best for

General power supply smoothing and filtering

Not ideal for

High-precision timing or filtering circuits requiring tight tolerance

Specifications

ManufacturerGeneric
Capacitance100uF
Voltage Rating (V)450
Operating Voltage (VDC)450
Tolerance (%)20
Operating Temperature (°C)-40 ~ 80
Mounting TypeThrough Hole
Length (mm)30
Width (mm)18
Weight (g)4 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 100uF 450V Electrolytic Capacitor

Frequently Asked Questions

Can I use this capacitor in an AC circuit?
No, this is a polarized electrolytic capacitor designed for DC voltage only. Applying AC voltage or reversing polarity can cause failure.
What is the maximum voltage this capacitor can handle?
The voltage rating is 450V DC. It should not be operated above this value.
Is the capacitor orientation important?
Yes, it is polarized. The negative lead must be connected to the lower voltage potential in the circuit.
What are the dimensions of this capacitor?
It measures approximately 30mm in length and 18mm in width, with a weight of about 4 grams.
How many capacitors are included?
The package includes one 100uF 450V electrolytic capacitor.
What is the operating temperature range?
It can operate from -40°C to 80°C. Avoid exceeding these limits for reliable performance.

Overview

This aluminium electrolytic capacitor offers a capacitance of 100uF and a voltage rating of 450V, making it a practical choice for smoothing and filtering rectified DC voltages in power supplies and DC-DC converters. The radial through-hole design allows for straightforward mounting on printed circuit boards, and the polarized construction requires correct polarity during installation. With a tolerance of ±20%, it meets the needs of many general-purpose electronic circuits.

Key Features

  • 100uF capacitance: Provides energy storage and ripple filtering for power supply rails.
  • 450V DC rating: Suitable for circuits operating at higher voltages, with a safety margin when used well below the rated voltage.
  • Radial through-hole mounting: Leads are designed to pass through PCB holes for soldering, ensuring a robust connection.
  • Wide temperature range: Functions reliably from -40°C to 80°C, accommodating various environmental conditions.
  • Compact dimensions: At 30mm in length and 18mm in width, it fits into space-constrained layouts.
  • Lightweight: Each capacitor weighs approximately 4 grams, adding minimal mass to your assembly.

Specifications Explained

Capacitance (100uF): This value determines how much charge the capacitor can store. 100uF is a common value for smoothing power supply outputs and decoupling local power rails. Voltage Rating (450V): The maximum DC voltage the capacitor can handle continuously. Always operate below this rating for safety and longevity. Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal value, which is acceptable for most filtering and coupling applications. Operating Temperature (-40 to 80°C): The capacitor is designed to work within this range; avoid exposing it to temperatures outside these limits. Mounting Type (Through Hole): The capacitor has leads that are inserted into holes on a PCB and soldered, providing a strong mechanical bond.

Compatibility and Requirements

This capacitor is a polarized component and must be connected with the correct polarity: the positive lead to the higher voltage potential and the negative lead to the lower potential. It is intended for through-hole PCB mounting, so your board should have appropriate holes and solder pads. Ensure that the circuit voltage does not exceed 450V DC and that the operating temperature remains within -40 to 80°C. No additional accessories are required for installation beyond standard soldering tools.

Typical Uses

  • Input and output filtering in linear and switching power supplies
  • Smoothing rectified DC in DIY electronics projects
  • Decoupling and buffering in DC-DC converter circuits
  • Repair and replacement in consumer electronics
  • Industrial power supply maintenance
  • Energy storage in low-power timing circuits

What's in the Box

Package includes: 1 x 100uF 450V Electrolytic Capacitor.

Quick specs

Manufacturer
Generic
Capacitance
100uF
Voltage Rating (V)
450
Operating Voltage (VDC)
450
Tolerance (%)
20
Operating Temperature (°C)
-40 ~ 80
See all specifications