
1 / 3 · Click to enlarge
AI Summary
This 10uF 400V aluminum electrolytic capacitor offers through-hole mounting and 20% tolerance for power supply filtering and smoothing. Its 400V rating makes it suitable for high-voltage DC rails in a compact radial package.
Key Highlights
- 10uF capacitance with 400V DC voltage rating
- Aluminum electrolytic construction for power filtering
- Through-hole radial mounting for easy PCB installation
- 20% capacitance tolerance for general-purpose use
- Operates from -40°C to 80°C
- Compact 13 mm length and 8.5 mm width
Ideal For
- Electronics hobbyists building power supply circuits
- Repair technicians recapping power boards
- Students learning about electrolytic capacitors
- Makers designing DC-DC converter filters
- Industrial maintenance engineers replacing capacitors
Buying Tip
Check the lead spacing and diameter on your PCB before ordering, and confirm the 400V rating exceeds your circuit’s maximum DC voltage with some margin.
Elecvora expert review
Our verdict
A dependable general-purpose electrolytic capacitor for high-voltage filtering tasks, though its 80°C limit and 20% tolerance mean it is not intended for precision or high-temperature applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 400V rating suitable for many power supply rails
- Compact radial through-hole package
- Wide -40°C to 80°C operating range
- Lightweight and easy to install
Cons
- Polarized design requires correct orientation
- Maximum operating temperature of 80°C limits use in hot enclosures
- 20% tolerance may be too loose for precision timing circuits
Best for
Power supply smoothing and general-purpose filtering
Not ideal for
High-temperature or precision analog applications
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 10uF |
| Voltage Rating (V) | 400 |
| Tolerance (%) | 20 |
| Operating Temperature (°C) | -40 ~ 80 |
| Mounting Type | Through Hole |
| Length (mm) | 13 |
| Width (mm) | 8.5 |
| Weight (g) | 4 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 10uF 400V Electrolytic Capacitor
Frequently Asked Questions
Can I use this capacitor in an AC circuit?
What does the 400V rating mean?
How do I identify the positive and negative leads?
Is this capacitor suitable for high-temperature environments?
What is included in the package?
Can I use this capacitor for audio coupling?
Overview
The Generic 10uF 400V Electrolytic Capacitor is a polarized aluminum electrolytic component built for through-hole mounting. It stores and releases energy to smooth rectified DC voltages, filter supply noise and buffer current demands in electronic circuits. With a 400V voltage rating and 10uF capacitance, it is particularly useful where higher DC voltages are present, such as in power supply sections and DC-link paths.
Key Features
- 10uF capacitance with a 20% tolerance for general-purpose filtering and decoupling.
- 400V voltage rating supports use on high-voltage DC rails within the specified limit.
- Through-hole radial leads simplify installation on prototyping boards and PCBs.
- Operating temperature range of -40°C to 80°C covers many indoor and enclosed electronic environments.
- Compact dimensions of 13 mm length and 8.5 mm width help save board space.
- Lightweight at approximately 4 g per capacitor.
Specifications Explained
Capacitance (10uF): This value determines how much charge the capacitor can hold at a given voltage. It is a common choice for smoothing low-frequency ripple in power supplies and for local decoupling.
Voltage rating (400V): The maximum DC voltage the capacitor is designed to withstand continuously. Always operate below this rating and observe correct polarity, as aluminum electrolytic capacitors are polarized.
Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal 10uF. This is typical for electrolytic capacitors and is acceptable in most filtering and smoothing applications.
Operating temperature (-40°C to 80°C): The capacitor can operate within this range. Note that 80°C is the upper limit; ensure adequate ventilation in enclosed designs.
Mounting type (through-hole): Radial leads pass through holes in a PCB and are soldered on the opposite side, providing a mechanically strong connection.
Compatibility and Requirements
This capacitor requires a PCB or prototyping board with through-hole pads spaced to match its radial lead pitch. It must be connected with the correct polarity: the positive lead to the higher voltage potential and the negative lead to the lower potential. Use a soldering iron suitable for electronic components and observe standard ESD precautions. The 400V rating means it can be used in circuits up to that DC voltage, but always verify your circuit’s peak voltage does not exceed the rating.
Typical Uses
- Input and output smoothing in linear and switching power supplies
- DC-DC converter filtering and buffering
- Decoupling capacitors in amplifier and control circuits
- Repair and recapping of power supply boards
- DC-link capacitors in low-power AC/AC converter experiments
- Energy storage in hobby and educational electronics projects
What's in the Box
One 10uF 400V electrolytic capacitor. The product image is for reference and may vary from the actual item.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 10uF
- Voltage Rating (V)
- 400
- Tolerance (%)
- 20
- Operating Temperature (°C)
- -40 ~ 80
- Mounting Type
- Through Hole










