Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of five 3mm RGB quick flash LED indicators rated 12-18V, each with a 20cm pre-wired cable. The quick flashing multi-colour output makes equipment status easy to spot at a glance.

Key Highlights

  • 5-pack of 3mm water-clear RGB quick flash LEDs
  • 12-18V operating range for common low-voltage systems
  • 20cm pre-attached wire for quick installation
  • Compact 3mm size fits tight panel spaces
  • Quick flash RGB output for clear status signalling
  • Lightweight design adds minimal load

Ideal For

  • Electronics hobbyists building custom control panels
  • Technicians adding status lights to equipment
  • RC and model builders needing compact indicators
  • DIY enthusiasts working on 12-18V projects
  • Makers creating visual alert systems

Buying Tip

Confirm your circuit's supply voltage stays within 12-18V before wiring these indicators, as they are not specified for use outside that range.

Elecvora expert review

Our verdict

A practical, low-cost set of pre-wired RGB flashing indicators that simplifies adding status lights to 12-18V projects. The pack of five and attached cables make them convenient for small builds, though the fixed voltage range limits flexibility.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-attached 20cm wires save installation time
  • Pack of five offers good value for multiple points
  • Compact 3mm size fits tight spaces
  • Quick flash RGB output is highly visible

Cons

  • Only suitable for 12-18V supplies
  • No mounting hardware included
  • Flashing pattern may not suit applications needing a steady light

Best for

DIY electronics and panel builders needing compact 12-18V flashing indicators

Not ideal for

Projects requiring steady, non-flashing or single-colour indication

Specifications

Voltage Rating (V)12 to 18
Size (mm)3
Additional Specs.Cable
Model No. / NameQuick Flash LED Indicator
Cable Length20 CM
LED Size (mm)3
ColorRGB
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 5 x 3mm RGB quick flash LED indicators with 20cm cable

Frequently Asked Questions

What voltage do these LED indicators require?
They are rated for 12 to 18 volts. Use a supply within that range for reliable operation.
Are the wires already attached?
Yes, each indicator comes with a 20cm cable pre-attached, so you can connect it directly to your circuit.
How many indicators are included?
The pack contains five RGB LED indicators.
What does quick flash RGB mean?
The LED flashes quickly while cycling through red, green, and blue colours, producing a multi-colour alert.
Can I use these with a 5V supply?
No, the rated range is 12 to 18V. A 5V supply is below the specified operating voltage.
Do I need a resistor?
The product data does not mention a required resistor. Connect only to a supply within the 12-18V range.

Overview

This pack of five 3mm water-clear RGB quick flash LED indicators provides a simple way to add visual status signalling to panels, equipment, and DIY electronics. Each indicator is rated for 12 to 18V and comes with a 20cm cable already attached, so you can wire it directly into your circuit without extra soldering to the LED legs. The quick flash RGB output cycles through colours to create an attention-grabbing alert that is easy to distinguish from steady indicator lights.

Key Features

  • Pack of 5: Enough indicators for multiple status points or spares.
  • RGB quick flash: Multi-colour flashing draws attention to changing conditions.
  • 12-18V range: Suits many low-voltage control and monitoring circuits.
  • 3mm water-clear lens: Compact size with a clear body for bright, visible output.
  • 20cm pre-wired cable: Saves time during installation and reduces wiring work.
  • Lightweight: Adds negligible weight to panels or enclosures.

Specifications Explained

Voltage rating (12-18V): These indicators are intended for circuits that supply between 12 and 18 volts. Check your supply is within this range before connecting. LED size (3mm): The 3mm diameter makes these suitable for small panel holes and compact layouts where larger indicators would not fit. Cable length (20cm): The attached wire gives enough length to route from the LED mounting point to a nearby terminal or power source. Colour (RGB): The LED produces red, green, and blue light in a quick flash pattern, which helps differentiate status conditions. Water clear lens: The clear lens allows the emitted colour to show through clearly when powered.

Compatibility and Requirements

These indicators require a DC supply within the stated 12-18V range. No additional resistor or driver is mentioned in the product data, so use them only with a supply that matches the rating. The pre-attached 20cm cable can be connected to your circuit using standard wiring methods. The pack does not include a power source, mounting hardware, or connectors beyond the attached wires.

Typical Uses

  • Panel status and alarm indication on equipment
  • DIY electronics projects needing a flashing multi-colour light
  • Model and RC builds requiring a compact visual indicator
  • Control boxes and enclosures where a small status lamp is needed
  • Educational projects demonstrating LED signalling

What's in the Box

Five RGB LED indicators, each with a 20cm attached cable.

Quick specs

Voltage Rating (V)
12 to 18
Size (mm)
3
Additional Specs.
Cable
Model No. / Name
Quick Flash LED Indicator
Cable Length
20 CM
LED Size (mm)
3
See all specifications