Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 8mm water clear RGB LED indicator light runs on 12-18V and features a quick flash mode with a 20cm cable for easy installation. Its compact size and bright multi-colour output make it ideal for panel status indication and DIY electronics projects.

Key Highlights

  • 8mm water clear lens for bright, unfiltered RGB light output
  • Quick flash mode draws attention to status changes and alerts
  • 12-18V operating range suits common panel and project voltages
  • 20cm cable simplifies wiring and installation in tight spaces
  • Light weight and compact design fits crowded panels
  • Direct LED light generation for efficient, low-waste operation

Ideal For

  • Electronics technicians building or repairing control panels
  • DIY hobbyists adding status indicators to projects
  • Makers designing custom equipment enclosures
  • FPV and RC enthusiasts needing compact visual alerts
  • Students learning about LED indicators and circuits

Buying Tip

Check that your power supply falls within the 12-18V range before connecting, as this indicator light does not include a current-limiting resistor.

Elecvora expert review

Our verdict

A straightforward 8mm RGB quick flash LED indicator that is easy to wire and install, thanks to its 20cm cable and wide 12-18V range. It suits panel builders and hobbyists who need an attention-grabbing status light without complex setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Quick flash mode is highly visible for alerts
  • Water clear lens gives bright, true colour output
  • 20cm cable simplifies connection to circuits
  • Light weight and compact for tight spaces
  • Operates directly on 12-18V without extra driver

Cons

  • No resistor included, so voltage must match exactly
  • Cable ends require soldering or connectors
  • Quick flash pattern may not suit applications needing steady light

Best for

Panel status indication and DIY electronics projects

Not ideal for

Applications requiring a steady or non-flashing light

Specifications

Voltage Rating (V)12 to 18
Size (mm)8
Additional Specs.Cable
LED Size (mm)8
Cable Length20
ColorRGB
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 5 x 12-18V 8mm Water Clear RGB Quick Flash LED Indicator Lights with 20cm Cable

Frequently Asked Questions

What voltage does this LED indicator require?
It operates on a voltage between 12V and 18V. Ensure your power supply falls within this range to avoid damaging the LED.
Is the flash pattern fast or slow?
This version features a quick flash pattern, meaning the RGB colours cycle rapidly. A slow flash variant is also available separately.
Can I use this indicator without additional components?
Yes, as long as your power source matches the 12-18V rating. No resistor or driver is included, so direct connection to a suitable supply is required.
What is included in the package?
The package contains one 12-18V 8mm water clear RGB quick flash LED indicator light with a 20cm cable, supplied as a pack of five.
How do I mount the indicator light?
Drill an 8mm hole in your panel and insert the LED from the front. The light weight means it can be secured with adhesive or a retaining ring if needed.
Is the LED waterproof?
No, the water clear lens refers to the transparent appearance, not waterproofing. It should be used in dry environments.

Overview

The 12-18V 8mm Water Clear RGB Quick Flash LED Indicator Light is a compact signalling component designed for panel mounting and electronic projects. It uses a water clear lens that allows the RGB light to shine through brightly, and it operates in a quick flash pattern to catch the eye. With a 20cm cable attached, the light can be wired into circuits without additional soldering to the LED itself, making it a practical choice for technicians, makers, and hobbyists who need a reliable visual indicator.

Key Features

  • Water clear 8mm lens: Provides a clean, bright output for the RGB colour.
  • Quick flash mode: Alternates colours rapidly to signal status or draw attention.
  • 12-18V voltage range: Compatible with common 12V and 18V systems used in panels and projects.
  • 20cm cable: Gives flexibility when routing wires to power sources or controllers.
  • Light weight: Adds minimal load to panels and is easy to mount.

Specifications Explained

The voltage rating of 12 to 18V means the indicator light is suited to circuits and equipment that operate within this range, such as many control panels and DIY power supplies. The 8mm LED size refers to the diameter of the light-emitting portion, which is a common size for panel indicators and fits standard mounting holes. The 20cm cable provides a short lead for connecting to terminals or solder points, reducing the need for extra wiring. The RGB colour indicates that the LED can produce red, green, and blue light, and in this quick flash version it cycles through colours rapidly. The water clear lens is transparent when off, allowing the true colours to show when illuminated.

Compatibility and Requirements

This indicator light requires a power source within the 12-18V range. It does not include a resistor or driver, so it should be connected to a supply that matches its voltage rating. The 20cm cable ends are ready for wiring to your circuit; you will need appropriate connectors or soldering tools to make the final connection. No additional components are specified for operation beyond a suitable power source.

Typical Uses

This LED indicator is well suited to panel status indication on mechanical or electrical equipment, power on/off signalling on electronic devices, and visual alerts in DIY projects. It can also be used in electronic signs, clock displays, and flashlights where a compact flashing light is needed. Makers and hobbyists will find it useful for adding a quick-flash indicator to control boxes, model builds, and test rigs.

What's in the Box

Package includes 1 x 12-18V 8MM Water Clear RGB Quick Flash LED Indicator Light with 20CM (Pack of 5).

Quick specs

Voltage Rating (V)
12 to 18
Size (mm)
8
Additional Specs.
Cable
LED Size (mm)
8
Cable Length
20
Color
RGB
See all specifications