
1 / 3 · Click to enlarge
AI Summary
This 5-pack of 8mm RGB slow flash LED indicator lights works with 12-18V systems and includes 20cm cables for easy installation. The slow color-cycling flash provides clear status indication for panels and projects.
Key Highlights
- 5-pack of 8mm water clear RGB slow flash LED indicators
- Operates on 12 to 18 volts DC for flexible use
- 20cm cable attached for direct wiring
- Slow flash cycle through RGB colors for attention-grabbing alerts
- Compact and lightweight for easy panel mounting
- Suitable for equipment status monitoring and DIY electronics
Ideal For
- Electronics hobbyists building custom panels
- Technicians monitoring equipment status
- DIY enthusiasts adding visual alerts
- Model makers needing compact indicators
- Makers creating interactive displays
Buying Tip
Check that your power supply voltage falls within the 12-18V range and that the 8mm diameter fits your panel cutout before ordering.
Elecvora expert review
Our verdict
These RGB slow flash LED indicators offer a convenient way to add multi-color status indication to panels and projects. The pre-wired 20cm cables and 12-18V range make them easy to integrate, though users should confirm polarity and voltage compatibility.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-wired with 20cm cable for quick installation
- Slow flash RGB effect provides clear visual alert
- Wide 12-18V voltage range suits many systems
- Compact 8mm size fits standard panel holes
- Pack of 5 offers good value for multiple points
Cons
- Requires soldering or terminal connection to power
- No datasheet or detailed current draw provided
- Polarity must be observed for proper operation
Best for
DIY electronics and panel indication projects
Not ideal for
High-voltage or AC applications
Specifications
| Voltage Rating (V) | 12 to 18 |
|---|---|
| Size (mm) | 8 |
| Additional Specs. | Cable |
| LED Size (mm) | 8 |
| Cable Length | 20 |
| Color | RGB |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 5 x 12-18V 8mm Water Clear RGB Slow Flash LED Indicator Light with 20cm Cable
Frequently Asked Questions
What voltage do these LED indicators require?
How long is the cable?
What is the flash pattern?
Are these lights waterproof?
What is included in the pack?
Do I need a resistor?
Overview
This set includes five 8mm water clear RGB slow flash LED indicator lights, each fitted with a 20cm cable. Designed for panel indication, these LEDs provide a clear visual signal by slowly cycling through red, green, and blue colors. The 12-18V voltage range makes them suitable for common low-voltage systems, and the compact 8mm size allows for neat installation in control panels, equipment enclosures, and custom projects.
Key Features
- Slow flash RGB effect: The LED automatically cycles through colors with a slow flash pattern, drawing attention without being distracting.
- Water clear lens: The clear lens ensures maximum light output and a clean look when unlit.
- 20cm cable: Pre-attached wiring saves time and simplifies connection to your circuit.
- 12-18V compatibility: Works across a range of common voltages, offering flexibility in different applications.
- 5-pack value: Multiple units allow for consistent indication across several points or spares for future projects.
Specifications Explained
Voltage Rating (12-18V): These indicators are designed to operate within this range, so you can use them with 12V or 18V supplies without additional resistors in many cases. Always verify your supply voltage matches.
LED Size (8mm): The 8mm diameter is a standard panel-mount size, fitting into common drill holes and bezels. The water clear lens provides high visibility.
Cable Length (20cm): The attached cable gives you enough length to route to nearby terminals or connectors, reducing the need for extra wiring.
Color (RGB): The LED emits red, green, and blue light in a slow flash sequence, creating a multi-color indication that stands out.
Compatibility and Requirements
These indicator lights require a DC power source within the 12-18V range. They come with bare wire ends on the 20cm cable, so you will need a suitable connection method such as soldering or terminal blocks. No additional components are included. Ensure your power supply can provide the necessary current for the LEDs (typically low).
Typical Uses
- Status indication on control panels and equipment
- DIY electronics projects and hobby circuits
- Model making and prop lighting
- Automotive or marine panel alerts (within voltage range)
- Visual indicators for alarms or monitoring systems
What's in the Box
5 x 12-18V 8mm Water Clear RGB Slow Flash LED Indicator Light with 20cm Cable
Quick specs
- Voltage Rating (V)
- 12 to 18
- Size (mm)
- 8
- Additional Specs.
- Cable
- LED Size (mm)
- 8
- Cable Length
- 20
- Color
- RGB












