Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 12mm red point laser module runs on 3-6V and features an adjustable spot size. It is ideal for DIY electronics projects like laser sensors and Arduino builds.

Key Highlights

  • 12mm diameter body with 35mm length
  • 5mW red point output at 650nm wavelength
  • Adjustable spot size via lens ring
  • Operates from 3V to 6V DC, 40mA current
  • 13cm cable with red (anode) and black (cathode) wires
  • Lightweight at 14g, easy to install

Ideal For

  • Electronics hobbyists building Arduino projects
  • Makers creating laser sensors or laser harps
  • 3D scanner builders needing a point laser
  • DIY enthusiasts looking for an adjustable laser module
  • Educational settings for optics demonstrations

Buying Tip

Remember to use a 3-6V DC supply and wear appropriate goggles when operating this laser module.

Elecvora expert review

Our verdict

This module is a straightforward, affordable solution for adding a red point laser to your projects. Its adjustable focus and wide voltage range make it versatile for hobbyist use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable spot size for different distances
  • Wide 3-6V operating range
  • Compact and lightweight design
  • Simple two-wire connection

Cons

  • Does not include a power source
  • No mounting hardware included
  • Requires careful handling due to laser safety

Best for

DIY electronics projects requiring a point laser

Not ideal for

Applications needing a line or cross laser pattern

Specifications

Item TypeLaser Module
Voltage Rating (V)3 to 6
Input current (mA)40mA
Wavelength650
Output TypeRed POINT
Cable Length13
Length (mm)35
Width (mm)12 (Body Diameter)
Weight (g)14
Shipping Weight0.018 kg
Shipping Dimensions10 × 8 × 6 cm

What's in the box

  • 1 x Red Point Laser Module CHT1230

Frequently Asked Questions

What is the power requirement for this laser module?
It operates from a DC supply between 3V and 6V and draws about 40mA.
Can I adjust the spot size?
Yes, the lens ring can be rotated to adjust the focus and spot size.
Does this module produce a line or cross?
No, it produces a red point only. It does not emit a line or cross pattern.
What is included in the package?
The package includes one Red Point Laser Module CHT1230. Power source and mounting hardware are not included.
Is it safe to use without eye protection?
No, you should wear appropriate laser safety goggles when operating this module, and never point it at eyes or animals.
What is the difference between CHT1230, SYD1230, and MXD1230?
They are the same module with different printed labels; operation and specifications are identical.

Overview

The CHT1230 is a compact red point laser module designed for electronics enthusiasts and makers. With a 12mm body diameter and 35mm length, it fits into tight spaces and is simple to mount. The module emits a focused red point at 650nm and operates from a 3-6V DC supply, drawing approximately 40mA. The spot size can be adjusted using the lens ring, allowing you to fine-tune the beam for your specific application. Connection is straightforward: the red wire is the anode and the black wire is the cathode, and the 13cm cable gives you enough length to reach your power source.

Key Features

  • Adjustable Spot Size: The lens ring lets you change the focus of the red point, useful for different distances and targets.
  • Wide Voltage Range: Works with 3V to 6V DC, making it compatible with common battery packs and power supplies.
  • Compact and Lightweight: At 14g and 12mm diameter, it is easy to integrate into small projects.
  • Simple Wiring: Red and black wires are clearly marked for anode and cathode.
  • Point Output: Produces a single red point, not a line or cross, for precise aiming.

Specifications Explained

Wavelength (650nm): This is in the visible red spectrum, so the beam is clearly visible in indoor settings. Output Type: The module produces a point, which is ideal for targeting and alignment tasks. Input Current (40mA): Low current draw means it won't drain your battery quickly in portable projects. Cable Length (13cm): Provides flexibility when placing the module away from the power source. Body Diameter (12mm): A standard size for many mounts and brackets.

Compatibility and Requirements

The module requires a DC power supply between 3V and 6V. It does not include a power source, so you will need to provide one. The red wire is positive (anode) and the black wire is negative (cathode). No additional driver is required; simply connect the wires to a suitable power source. Note that the module is labeled CHT1230, but the same module may be printed with SYD1230 or MXD1230; operation is identical.

Typical Uses

This laser module is popular for DIY laser sensors, laser harps using Arduino, and as a component for 3D scanner projects like Ciclop. It can also be used for alignment, positioning, and educational demonstrations. Because it emits a point, it is not suitable for applications requiring a line or cross pattern.

What's in the Box

1 x Red Point Laser Module CHT1230.

Quick specs

Item Type
Laser Module
Voltage Rating (V)
3 to 6
Input current (mA)
40mA
Wavelength
650
Output Type
Red POINT
Cable Length
13
See all specifications