
1 / 6 · Click to enlarge
AI Summary
A compact inline DC meter that measures up to 150A and 60V across eight electrical parameters, including live power plus accumulated Ah and Wh. It is self-powered from the source side and needs no buttons or setup.
Key Highlights
- Measures eight parameters including volts, amps, watts, Ah and Wh
- Handles 4.8 to 60VDC systems with currents up to 150A
- Self-powered from the source side for normal measurements
- Button-free operation with no configuration required
- Compact 85 x 45 mm body weighing around 80 g
- Rubber paint finish in black for a durable feel
Ideal For
- Drone builders testing motor, ESC and battery combinations
- RC hobbyists monitoring powertrain current and power
- Solar experimenters checking panel output into a regulator
- Owners of 12V accessories such as fridges or chargers
- Makers and electronics learners working with DC loads
Buying Tip
Confirm your circuit stays within 4.8 to 60VDC and below 150A, and plan your own connectors since none are listed.
Elecvora expert review
Our verdict
A practical, no-fuss inline meter for checking DC current and power within its stated limits. Its button-free operation and self-powering make it easy to drop into a test bench or field setup.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Reads eight parameters in one compact unit
- No buttons or configuration needed
- Self-powered from the source side
- Wide 4.8 to 60VDC range with 150A rating
Cons
- No connectors or cables listed in the package
- Peak and accumulated values reset on power-up
- Must stay within the stated voltage and current limits
Best for
Drone, RC and DC power users who need quick inline current and energy readings
Not ideal for
High-voltage AC systems or circuits exceeding 60VDC or 150A
Specifications
| Model No. / Name | Wattmeter |
|---|---|
| Voltage Rating | 4.8 to 60VDC |
| Rated Current (A) | 150 |
| Color | Black |
| Material | Rubber Paint |
| Length (mm) | 85 |
| Width (mm) | 45 |
| Weight (g) | 80 |
| Shipping Weight | 0.084 kg |
| Shipping Dimensions | 9 × 13 × 5 cm |
Frequently Asked Questions
What parameters does this meter measure?
Does it need a separate power supply?
What voltage and current can it handle?
How do I connect it?
Why do some readings reset?
What is included in the package?
Overview
The 150A Watt Meter and Power Analyzer Module is an inline measurement tool for DC systems. It sits between a power source and a load, then reports what is flowing through the circuit. With a voltage range of 4.8 to 60VDC and a rated current of 150A, it covers many hobby and small-scale power setups, from drone powertrains to solar regulators and 12V accessories.
The unit is self-powered when measuring a source, so no extra supply is needed for ordinary use. There are no buttons to press and nothing to configure: connect the leads and the display begins reporting.
Key Features
- Eight parameters: voltage, current, power, capacity in Ah, energy in Wh, minimum voltage, peak current and peak power.
- Real-time and accumulated data: live volts, amps and watts are shown continuously, while Ah, Wh, Ap, Vm and Wp cycle on screen every two seconds.
- Self-powered: the meter draws power from the source side during normal measurement.
- Simple operation: no buttons and no setup routine.
- Compact build: 85 mm long, 45 mm wide and around 80 g, with a black rubber paint finish.
Specifications Explained
4.8 to 60VDC is the operating window. Stay inside it for safe, accurate readings. The source description notes 0V operation with an optional auxiliary battery input, but that accessory is not part of the listed package.
150A rated current sets the upper limit for the circuit you are measuring. Keep your expected current below this figure.
Ah and Wh accumulate over time, so you can see how much charge and energy have passed through the meter during a run. These values, along with peak current, peak power and minimum voltage, reset when the meter powers up.
Compatibility and Requirements
The meter is designed for DC systems within the 4.8 to 60VDC range and up to 150A. It connects inline: source on one side, load on the other. No separate power supply is required for standard source-side measurement. The product is unbranded and no additional accessories or cables are listed.
Typical Uses
- Checking motor, ESC and battery behaviour on a drone or RC build.
- Monitoring current, voltage and power drawn by a 12V fridge or similar accessory.
- Observing charging current and accumulated energy going into an auxiliary battery.
- Measuring the output of a solar panel feeding a regulator.
What's in the Box
Package contents are not specified for this listing. Please confirm the included items before ordering if you need cables or connectors.
Quick specs
- Model No. / Name
- Wattmeter
- Voltage Rating
- 4.8 to 60VDC
- Rated Current (A)
- 150
- Color
- Black
- Material
- Rubber Paint
- Length (mm)
- 85














