
1 / 3 · Click to enlarge
AI Summary
A single 15nF (0.015uF) polyester film capacitor rated 100V with 5% tolerance in a radial through-hole package. Its compact 17 x 12mm body and low-inductance film construction suit general-purpose coupling, filtering and timing work.
Key Highlights
- 15nF (0.015uF) capacitance with a tight 5% tolerance
- 100V rating for general-purpose DC and semi-critical circuits
- Polyester film dielectric for low inductance and stable behaviour
- Radial through-hole mounting for breadboards and PCBs
- Compact 17mm x 12mm body, about 3g per capacitor
- Marked 2A153J for quick identification on the bench
Ideal For
- Hobbyists building and testing circuits on breadboards
- Repair technicians replacing small-value radial capacitors
- Electronics students learning about film capacitors
- Design engineers needing a low-cost 15nF part for prototypes
- Makers stocking common passive components for the bench
Buying Tip
Check the lead spacing and the 17mm x 12mm body size against your board layout before ordering, and confirm your circuit voltage stays below the 100V rating.
Elecvora expert review
Our verdict
A straightforward, low-cost 15nF film capacitor that does exactly what its markings promise. The 5% tolerance and 100V rating make it a sensible bench staple for general-purpose work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Tight 5% tolerance for predictable values
- Low-inductance polyester film construction
- Compact radial body for easy PCB fitting
- Clear 2A153J marking for quick identification
Cons
- Sold separately, one piece per order
- Requires soldering for permanent installation
- Not intended for voltages above its 100V rating
Best for
General-purpose coupling, filtering and timing in low-voltage DC circuits
Not ideal for
High-voltage or power-supply applications beyond the 100V rating
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 15nF |
| Voltage Rating (V) | 100 |
| Tolerance (%) | 5 |
| Mounting Type | Through Hole |
| Length (mm) | 17 |
| Width (mm) | 12 |
| Case/Package | Redial |
| Weight (g) | 3 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 15nF (0.015uF - 2A153J) 100V Polyester Film Capacitor
Frequently Asked Questions
What does 2A153J mean on this capacitor?
Is this capacitor polarised?
Can I use it above 100V?
How many capacitors do I get?
Will it fit a breadboard?
How should I store it?
Overview
This Generic polyester film capacitor offers 15nF (0.015uF) of capacitance with a 100V rating and a 5% tolerance. It uses a polyethylene terephthalate film dielectric, a construction widely chosen for general-purpose electronics because it combines small physical size with useful capacitance values at low cost. The part is supplied in a radial through-hole case measuring 17mm in length and 12mm in width, and each capacitor weighs roughly 3g.
The 2A153J marking makes the part easy to identify during assembly, rework or stock checks, so you can confirm the value before soldering it into a board.
Key Features
- 15nF capacitance: a small-value part suited to signal-level and timing roles.
- 100V rating: headroom for common low-voltage DC circuits.
- 5% tolerance: predictable behaviour where value accuracy matters.
- Polyester film dielectric: low inductance and stable performance.
- Radial through-hole format: simple to fit on breadboards and plated-through PCBs.
- Compact body: 17mm x 12mm, around 3g per unit.
Specifications Explained
Capacitance and tolerance
At 15nF, or 0.015uF, this capacitor sits in the nanofarad range, which is useful for coupling stages, simple RC timing and high-frequency bypass. The 5% tolerance means the actual value stays close to the marked figure, which helps when the circuit depends on a predictable time constant.
Voltage rating
The 100V rating describes the working voltage the part is intended for. Keep the applied voltage comfortably below this figure in your design, and account for any spikes in your circuit.
Package and mounting
The radial case has both leads exiting the same side, which makes it straightforward to insert into a PCB or breadboard. Through-hole mounting gives a mechanically secure joint that is easy to inspect and rework.
Compatibility and Requirements
This is a passive two-lead component, so it needs no power supply of its own. It requires a circuit position that accepts a radial through-hole capacitor with a 17mm x 12mm body, and it must be used within its 100V rating. Soldering equipment is needed for permanent installation.
Typical Uses
- Coupling and signal-path work in audio and general electronics
- RC timing networks and simple filters
- Bypass duties in low-voltage DC circuits
- Breadboard prototyping and educational projects
- Repair and replacement work where a 15nF radial part is called for
What's in the Box
One 15nF (0.015uF - 2A153J) 100V polyester film capacitor.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 15nF
- Voltage Rating (V)
- 100
- Tolerance (%)
- 5
- Mounting Type
- Through Hole
- Length (mm)
- 17











