
1 / 3 · Click to enlarge
AI Summary
A 1k Ohm SMD single turn trimmer potentiometer in a compact 3x3mm package for calibration and tuning. Its 250° mechanical angle allows quick, one-turn resistance adjustment on surface-mount boards.
Key Highlights
- 1k Ohm resistance with 20% tolerance for general-purpose trimming
- Compact 3x3mm SMD footprint saves board space
- Single turn adjustment with 250° nominal mechanical angle
- Wide operating temperature range of -55°C to 125°C
- Temperature coefficient of ±150ppm/°C for stable performance
- Surface-mount design for efficient PCB assembly
Ideal For
- Electronics hobbyists building compact SMD projects
- Design engineers needing adjustable resistors for calibration
- Repair technicians replacing trimmer potentiometers
- Students learning about surface-mount components
- Makers prototyping analog circuits
Buying Tip
Confirm that your PCB layout accepts a 3x3mm SMD trimmer and that a single turn adjustment range meets your calibration needs before ordering.
Elecvora expert review
Our verdict
This 1k Ohm SMD trimmer is a practical choice for compact calibration tasks where a single turn is sufficient. Its wide temperature range and small footprint make it versatile for many PCB designs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Space-saving 3x3mm SMD package
- Wide operating temperature range
- Simple single turn adjustment
- Good general-purpose tolerance
Cons
- 20% tolerance may be too loose for precision circuits
- Single turn limits fine adjustment resolution
- Requires SMD soldering skills and tools
Best for
General-purpose calibration and tuning on surface-mount boards
Not ideal for
High-precision multi-turn adjustment applications
Specifications
| Resistance (Ohm) | 1k |
|---|---|
| Tolerance (%) | 20 |
| Temperature Coefficient | ±150ppm/℃ |
| Operating Temperature (°C) | -55 to 125 |
| Mounting Type | SMD/SMT |
| Mechanical Angle | 250° (nominal) |
| Length (mm) | 3 |
| Width (mm) | 3 |
| Weight (g) | 0.1 (approx) (each) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 1k Ohm SMD Single Turn Potentiometer Trimmer Adjustable Resistance
Frequently Asked Questions
What is the resistance value of this trimmer?
Is this potentiometer suitable for through-hole mounting?
What is the operating temperature range?
How many turns does this trimmer have?
What is included in the package?
Can I use this for precision audio applications?
Overview
The Generic 1k Ohm SMD Single Turn Trimmer Potentiometer is a small, surface-mount adjustable resistor intended for calibration and tuning tasks on printed circuit boards. Its 3 mm by 3 mm size makes it easy to place in dense layouts, while the single turn design offers a simple way to set resistance with a nominal 250° mechanical rotation. This trimmer is well suited to applications where a one-turn adjustment range is sufficient, such as setting reference voltages, adjusting signal levels, or fine-tuning analog circuits during development and repair.
Key Features
- 1k Ohm resistance: A common value for many calibration and biasing applications.
- 20% tolerance: Provides adequate precision for general-purpose trimming without the cost of tighter tolerances.
- Surface-mount package: 3 mm by 3 mm dimensions allow compact PCB integration.
- Single turn adjustment: 250° nominal mechanical angle for quick, straightforward setting.
- Wide temperature range: Operates from -55°C to 125°C, suitable for varied environments.
- Temperature coefficient: ±150ppm/°C helps maintain stability across temperature changes.
Specifications Explained
Resistance and tolerance: The 1k Ohm nominal resistance with ±20% tolerance means the actual resistance can vary by up to 200 Ohms. This is typical for general-purpose trimmers and is acceptable for applications where exact resistance is not critical, as the adjustable range compensates during tuning.
Temperature coefficient: A ±150ppm/°C coefficient indicates how much the resistance changes with temperature. For every degree Celsius change, the resistance shifts by up to 0.015% of its value, which is suitable for many non-critical analog circuits.
Mechanical angle: The 250° nominal mechanical angle defines the rotation range of the adjustment screw. A single turn provides fast adjustment, making it ideal for settings that do not require multi-turn precision.
Operating temperature: The -55°C to 125°C range ensures the component can function in harsh environments, from cold outdoor installations to warm enclosed electronics.
Mounting type: SMD/SMT design means the potentiometer is soldered directly onto the surface of the PCB, saving space and allowing automated assembly.
Compatibility and Requirements
This trimmer is designed for surface-mount soldering onto PCBs. It requires a suitable soldering station or reflow process for installation. No additional hardware is needed beyond standard SMD soldering tools. The 1k Ohm resistance value should be compatible with circuits designed for that range; verify your circuit requirements before use.
Typical Uses
- Calibrating sensor outputs and reference voltages
- Fine-tuning analog signal levels in audio or instrumentation circuits
- Adjusting bias currents in transistor circuits
- Prototyping and educational electronics projects
- Repair and maintenance of existing SMD boards
What's in the Box
Package includes: 1 x 1k Ohm SMD Single Turn Potentiometer Trimmer Adjustable Resistance.
Quick specs
- Resistance (Ohm)
- 1k
- Tolerance (%)
- 20
- Temperature Coefficient
- ±150ppm/℃
- Operating Temperature (°C)
- -55 to 125
- Mounting Type
- SMD/SMT
- Mechanical Angle
- 250° (nominal)












