
1 / 3 · Click to enlarge
AI Summary
A 2.2uF 250V aluminum electrolytic capacitor with through-hole mounting and ±20% tolerance. It provides reliable smoothing and filtering in power supply and converter circuits.
Key Highlights
- 2.2uF capacitance with 250V voltage rating
- ±20% tolerance for general-purpose applications
- Operates from -40°C to 80°C
- Through-hole radial mounting
- Compact 12mm length and 6mm width
- Lightweight at 4 grams each
Ideal For
- Electronics hobbyists building power supply circuits
- Repair technicians replacing through-hole capacitors
- Engineering students learning about filter design
- Makers working on DC-DC converter projects
- Industrial maintenance teams servicing power supplies
Buying Tip
Verify the required capacitance and voltage rating in your circuit, and always observe polarity when installing this capacitor.
Elecvora expert review
Our verdict
This 2.2uF 250V electrolytic capacitor offers a practical balance of voltage rating and compact size for general-purpose through-hole applications. It is a reliable choice for smoothing and filtering tasks where precision tolerance is not critical.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Higher voltage rating than many standard electrolytics
- Wide operating temperature range
- Compact and lightweight
- Easy through-hole installation
Cons
- Polarized design requires careful orientation
- ±20% tolerance may not suit precision circuits
- Not suitable for high-frequency applications
Best for
General-purpose power supply smoothing and filtering
Not ideal for
Precision timing or high-frequency RF circuits
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 1uF |
| Voltage Rating (V) | 400 |
| Tolerance (%) | 20 |
| Operating Temperature (°C) | -40 ~ 80 |
| Mounting Type | Through Hole |
| Length (mm) | 12 |
| Width (mm) | 6 |
| Weight (g) | 4 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 2.2uF 250V Electrolytic Capacitor
Frequently Asked Questions
What is the polarity of this capacitor?
Can I use this capacitor in an AC circuit?
What is the maximum operating temperature?
How many capacitors are included?
Is this capacitor suitable for high-frequency filtering?
What is the tolerance of this capacitor?
Overview
The Generic 2.2uF 250V Electrolytic Capacitor is an aluminum electrolytic capacitor built for through-hole mounting. It uses a polarized design that requires correct DC polarity during operation. With a capacitance of 2.2 microfarads and a voltage rating of 250V, this component is suitable for smoothing and buffering rectified DC voltages in a variety of electronic devices. Its radial lead configuration allows it to sit upright on a printed circuit board, making it a common choice for power supply sections and DC-DC converter stages.
Key Features
- 2.2uF capacitance: Provides energy storage and filtering for low-current circuits.
- 250V voltage rating: Handles higher voltage rails than standard low-voltage capacitors.
- ±20% tolerance: Acceptable for general-purpose smoothing and decoupling tasks.
- Wide temperature range: Operates reliably from -40°C to 80°C.
- Through-hole mounting: Easy to install on prototyping boards and repaired PCBs.
- Compact size: 12mm length and 6mm width fit tight layouts.
Specifications Explained
Capacitance (2.2uF): This value determines how much charge the capacitor can store. It is well suited for filtering low-frequency noise and stabilizing supply lines in low-power circuits.
Voltage Rating (250V): The maximum DC voltage the capacitor can safely handle. Always operate below this rating to ensure reliable performance and long life.
Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal value. This is typical for electrolytic capacitors and is acceptable in most smoothing applications.
Operating Temperature (-40°C to 80°C): The capacitor can function in cold and moderately warm environments. Avoid exposing it to temperatures outside this range.
Mounting Type (Through Hole): Designed to be soldered into plated through-holes on a PCB. This provides a strong mechanical connection.
Dimensions and Weight: At 12mm long and 6mm wide, with a weight of 4 grams, it is easy to handle and install.
Compatibility and Requirements
This capacitor requires a DC voltage with the correct polarity. It is a polarized component, so reverse polarity can damage it. It is intended for through-hole PCB mounting and should be soldered using standard electronics soldering practices. No additional accessories are required for installation.
Typical Uses
Common applications include input and output decoupling in power supplies, smoothing rectified DC in DC-DC converters, and filtering in industrial power supplies. It can also be used in AC/AC converters for variable-frequency drives and in power factor correction circuits where a polarized capacitor is appropriate.
What's in the Box
Package includes: 1 x 2.2uF 250V Electrolytic Capacitor.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 1uF
- Voltage Rating (V)
- 400
- Tolerance (%)
- 20
- Operating Temperature (°C)
- -40 ~ 80
- Mounting Type
- Through Hole










