
1 / 3 · Click to enlarge
At a glance
This breakout board is a good fit for makers, students and electronics hobbyists. Main specs: no. of channels 2; compatible devices Arduino Raspberry Pi STM32; length (mm) 15.
Key Highlights
- No. of Channels: 2
- Compatible Devices: Arduino Raspberry Pi STM32
- Length (mm): 15
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| No. of Channels | 2 |
|---|---|
| Compatible Devices | Arduino Raspberry Pi STM32 |
| Length (mm) | 15 |
| Width (mm) | 15 |
| Weight (g) | 1.02 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 6 × 8 × 1 cm |
Overview
The 2 Channel Logic Level Converter 3.3V 5V TTL is listed in our breakout board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- No. of Channels: 2
- Compatible Devices: Arduino Raspberry Pi STM32
- Length (mm): 15 (measure your mounting space before ordering)
- Width (mm): 15 (measure your mounting space before ordering)
- Weight (g): 1.02 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 8 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
2 Channel Logic Level Converter Module is a Bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.
What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'HV' pin, low voltage (3.3V for example) to 'LV', and ground from the system to the 'GND' pin.
Note:
For example High voltage: 5V, low voltage: 3.3V HV connect 5V power supply LV connect 3.3V power supply GND connect negative, two power supply commons LVx input and output are 3.3V TTL, HVx input and output are 5V TTL, LVx and TVx bidirectional transfers.Features:
Package Includes:
Quick specs
- No. of Channels
- 2
- Compatible Devices
- Arduino Raspberry Pi STM32
- Length (mm)
- 15
- Width (mm)
- 15
- Weight (g)
- 1.02
- Shipping Weight
- 0.005 kg













