Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 20A intelligent PWM solar charge controller that auto-detects 12V or 24V lead-acid batteries and shows system status on an LCD. Its built-in 5V 3A USB port lets you charge small devices directly from your solar setup.

Key Highlights

  • 20A charging current for small to medium solar arrays
  • Auto-detects 12V or 24V lead-acid battery systems
  • Solar input accepted up to 50V
  • Backlit LCD shows charging and system status
  • 5V 3A USB output for charging small devices
  • Dual MOSFET reverse current protection and low heat output

Ideal For

  • DIY builders assembling a small off-grid solar and battery system
  • Cabin, shed and workshop owners running 12V or 24V lighting
  • Remote monitoring and sensor installations needing a compact controller
  • Campers and hobbyists who want USB charging from a solar setup
  • Users upgrading from a basic controller to one with an LCD readout

Buying Tip

Check that your panel array's open-circuit voltage stays below 50V and its current stays within 20A before connecting, and confirm your battery is a 12V or 24V lead-acid type.

Elecvora expert review

Our verdict

A straightforward, affordable PWM controller for small lead-acid solar setups, with the LCD and USB port adding everyday convenience. It covers the basics well as long as your array stays within its 20A and 50V limits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Automatic 12V/24V detection simplifies installation
  • LCD gives clear status feedback without extra meters
  • Built-in USB port for charging small devices
  • Multiple protections including reverse current via dual MOSFETs

Cons

  • Lead-acid batteries only, per the given data
  • No package contents or mounting hardware confirmed
  • PWM design rather than MPPT

Best for

Small off-grid lead-acid solar systems needing a readable controller with USB charging

Not ideal for

High-current arrays or non-lead-acid battery chemistries

Specifications

Item TypeSolar Controller
Charging Current20
Battery Input Voltage (V)12-24V Auto
Solar input voltage<50V
USB3A@5V
Operating Temperature (°C)-35 to 60
Length (mm)150
Width (mm)78
Weight (g)150
Shipping Weight0.17 kg
Shipping Dimensions15 × 8 × 4 cm

Frequently Asked Questions

What battery voltage does this controller support?
It supports 12V and 24V lead-acid batteries and detects the voltage automatically once connected to the battery.
What is the maximum solar input voltage?
Solar input must stay below 50V. Check your panel array's open-circuit voltage before connecting.
Can I charge my phone from this controller?
Yes. The built-in USB port supplies 3A at 5V, which suits phones and other small USB devices.
What protections are included?
The controller includes short circuit, open circuit, reverse voltage and overload protection, plus dual MOSFET reverse current protection.
What is in the box?
Package contents are not specified for this listing, so confirm what is included before ordering.
What temperature range does it work in?
It is specified for operation from -35 to 60 °C.

Overview

The Generic 20A Intelligent LCD Solar Controller is a digital PWM charge controller for lead-acid batteries in small off-grid solar power systems. Once connected to a battery, it automatically detects whether the bank is 12V or 24V, so the same unit can serve several common configurations. An integrated industrial microcontroller runs the charge logic and drives the LCD display, which keeps charging status and system information visible without extra meters.

Key Features

  • Four-stage PWM charge management for controlled charging of lead-acid batteries.
  • Automatic 12V/24V detection when the controller is connected to the battery.
  • LCD display showing system status and charging information.
  • Dual MOSFET reverse current protection to help prevent current flowing back to the panels at night.
  • Built-in protections against short circuit, open circuit, reverse voltage and overload.
  • USB output port rated 3A at 5V for charging phones and other small devices.
  • Low heat production in a compact 150 x 78 mm housing.

Specifications Explained

Charging current: 20A. This is the maximum current the controller is designed to handle on the charging path, so match your panel array output to stay within that figure. Battery input voltage: 12-24V auto. The controller reads the connected battery and configures itself, removing the need to pick a voltage manually. Solar input voltage: under 50V. Keep the open-circuit voltage of your panel array below this limit. USB: 3A at 5V. The USB port provides a regulated 5V supply for small electronics, independent of the battery voltage. Operating temperature: -35 to 60 °C. The unit is specified to work across a wide range of climates. The housing measures 150 mm long and 78 mm wide and weighs around 150 g.

Compatibility and Requirements

This controller is intended for lead-acid batteries in 12V or 24V configurations, with a solar input below 50V. A battery must be connected for the controller to detect system voltage and begin operating. Plan your panel array so its current stays within the 20A charging rating and its voltage stays under the 50V solar input limit.

Typical Uses

Suitable for small off-grid solar installations such as sheds, cabins, remote monitoring points, garden lighting and DIY panel-and-battery projects where a clear display and a USB charging point are useful.

What's in the Box

Package contents are not specified for this listing.

Quick specs

Item Type
Solar Controller
Charging Current
20
Battery Input Voltage (V)
12-24V Auto
Solar input voltage
<50V
USB
3A@5V
Operating Temperature (°C)
-35 to 60
See all specifications