
1 / 3 · Click to enlarge
AI Summary
A pack of ten 220uF 50V surface mount electrolytic capacitors for PCB filtering and power circuits. The SMD design and 20% tolerance make them a practical choice for compact board-level projects.
Key Highlights
- 220uF capacitance with 50V voltage rating
- Surface mount design for direct PCB soldering
- 20% tolerance for general-purpose filtering
- Compact 10mm x 10mm footprint
- Pack of 10 provides spares for multiple projects
- Suitable for power supply decoupling and repair
Ideal For
- Electronics hobbyists building or repairing PCBs
- Audio equipment technicians replacing capacitors
- DIY enthusiasts working on power supply projects
- Students learning surface mount soldering
- Maintenance technicians servicing consumer electronics
Buying Tip
Check the pad spacing on your PCB matches the 10mm x 10mm footprint before ordering, and always observe polarity when soldering electrolytic capacitors.
Elecvora expert review
Our verdict
These capacitors offer a practical solution for common board-level filtering and repair tasks. The pack of ten provides good value for hobbyists and technicians who need a reliable stock of 220uF 50V SMD parts.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Convenient pack of 10 for multiple uses
- Standard 220uF 50V rating covers many applications
- Surface mount design saves PCB space
- 20% tolerance is adequate for general purposes
Cons
- Tolerance of 20% may not suit precision circuits
- No detailed temperature or lifetime specifications provided
- Requires SMD soldering skills and equipment
Best for
General-purpose PCB filtering and repair
Not ideal for
High-precision or high-temperature applications
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 220uF |
| Mounting Type | SMD |
| Voltage Rating (V) | 50 |
| Tolerance (%) | 20 |
| Length (mm) | 10 |
| Width (mm) | 10 |
| Weight (g) | 14 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 10 x 220uF 50V Surface Mount Electrolytic Capacitors
Frequently Asked Questions
Can I use these capacitors in any orientation?
What is the maximum voltage these capacitors can handle?
Are these capacitors suitable for audio applications?
How many capacitors are included in the pack?
Do I need special tools to solder these capacitors?
What is the shelf life of these capacitors?
Overview
The 220uF 50V Surface Mount Electrolytic Capacitor (Pack of 10) is a set of general-purpose capacitors designed for board-level applications. Each capacitor offers a capacitance of 220 microfarads and a voltage rating of 50V, with a tolerance of ±20%. The surface mount (SMD) construction allows for direct soldering onto PCB pads, making them suitable for automated assembly and compact circuit designs. With dimensions of 10mm by 10mm, these capacitors can fit into tight spaces on a board. This pack of ten is a convenient way to keep a common value in your parts drawer for repairs, prototypes, or small production runs.
Key Features
- 220uF capacitance: A widely used value for smoothing and filtering in power supplies.
- 50V voltage rating: Provides headroom for many low-to-medium voltage circuits.
- Surface mount design: Enables efficient PCB assembly and saves space compared to through-hole parts.
- 20% tolerance: Standard tolerance suitable for non-critical filtering and decoupling.
- Compact size: 10mm length and width make these capacitors suitable for dense board layouts.
- Pack of 10: Enough for multiple projects or as spares for future repairs.
Specifications Explained
Capacitance (220uF): This value determines how much charge the capacitor can store. 220uF is a common choice for filtering ripple in power supplies and for decoupling in audio and digital circuits.
Voltage Rating (50V): The maximum DC voltage the capacitor can handle continuously. It is important not to exceed this rating in your application. 50V is suitable for many hobbyist and consumer electronics projects.
Tolerance (±20%): The actual capacitance can vary by up to 20% from the nominal value. This is acceptable for most general-purpose applications where precise capacitance is not critical.
Mounting Type (SMD): Surface mount devices are soldered directly onto the surface of the PCB, which allows for smaller boards and automated assembly. They require a suitable pad layout and soldering technique.
Dimensions (10mm x 10mm): The physical size of each capacitor. Ensure your PCB has enough space and the correct pad spacing for this footprint.
Compatibility and Requirements
These capacitors are compatible with standard SMD soldering processes, including reflow and hand soldering with proper tools. They require a PCB with pads designed for surface mount components. No additional components are needed for basic operation, but they should be used within their voltage and temperature limits (temperature not specified). Always observe correct polarity when installing electrolytic capacitors.
Typical Uses
- Power supply filtering and smoothing
- Decoupling and bypass in electronic circuits
- Audio equipment repair and modification
- DIY electronics projects and prototyping
- Maintenance and repair of consumer electronics
What's in the Box
10 x 220uF 50V Surface Mount Electrolytic Capacitors.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 220uF
- Mounting Type
- SMD
- Voltage Rating (V)
- 50
- Tolerance (%)
- 20
- Length (mm)
- 10











