
1 / 3 · Click to enlarge
AI Summary
This 2200uF 25V electrolytic capacitor is a through-hole component for smoothing and filtering DC voltages in power supplies. Its compact size and ±20% tolerance make it a reliable choice for repairs and prototyping.
Key Highlights
- 2200uF capacitance for effective smoothing and filtering
- Voltage rating of 10V (specified) for low-voltage DC circuits
- Through-hole mounting for secure PCB installation
- Operates from -40°C to 80°C for varied environments
- Compact 20mm length and 12mm width
- Lightweight at 4g each
Ideal For
- Electronics hobbyists building power supply circuits
- Repair technicians replacing faulty capacitors
- Students learning about filter circuits
- Makers prototyping DC-DC converters
- Audio enthusiasts recapping amplifiers
Buying Tip
Double-check the voltage rating in your circuit; although the title says 25V, the specified rating is 10V, so ensure your application does not exceed 10V DC.
Elecvora expert review
Our verdict
This 2200uF electrolytic capacitor offers a practical solution for smoothing and filtering in low-voltage DC circuits. Its through-hole design and compact size make it easy to integrate into prototypes and repairs, though users must heed the 10V rating.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High capacitance for effective filtering
- Compact dimensions save board space
- Wide operating temperature range
- Lightweight and easy to handle
Cons
- Voltage rating is only 10V, despite 25V in title
- Polarized, so requires careful orientation
- Tolerance of ±20% may be too loose for precision applications
Best for
Low-voltage power supply smoothing and general electronics projects
Not ideal for
High-voltage or precision timing circuits
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 2200uF |
| Voltage Rating (V) | 10 |
| Tolerance (%) | 20 |
| Operating Temperature (°C) | -40 ~ 80 |
| Mounting Type | Through Hole |
| Length (mm) | 20 |
| Width (mm) | 12 |
| Weight (g) | 4 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 2200uF 25V Electrolytic Capacitor
Frequently Asked Questions
What is the voltage rating of this capacitor?
Is this capacitor polarized?
What is the operating temperature range?
What are the dimensions?
What is included in the package?
Can I use this in AC circuits?
Overview
The Generic 2200uF 25V Electrolytic Capacitor is a polarized aluminum electrolytic capacitor intended for through-hole mounting on printed circuit boards. It stores and releases electrical energy, making it useful for smoothing rectified DC voltages, filtering power supply noise, and buffering energy in electronic circuits. With a capacitance of 2200 microfarads and a specified voltage rating of 10V, this capacitor is well-suited for low-voltage power supply applications. Its operating temperature range of -40°C to 80°C allows use in a variety of environments, and the compact dimensions of 20mm length by 12mm width help save board space.
Key Features
- High capacitance: 2200uF provides substantial energy storage for smoothing and filtering.
- Polarized design: Requires correct polarity for safe operation, typical of electrolytic capacitors.
- Through-hole mounting: Leads can be soldered into plated through-holes for a robust connection.
- Wide temperature range: Operates from -40°C to 80°C, suitable for many industrial and consumer applications.
- Compact size: 20mm length and 12mm width allow installation in tight spaces.
- Lightweight: Each capacitor weighs only 4 grams.
Specifications Explained
Capacitance (2200uF): This value determines how much charge the capacitor can store. Higher capacitance is beneficial for smoothing out voltage ripples in power supplies. Voltage Rating (10V): The maximum DC voltage the capacitor can handle continuously. Always ensure your circuit voltage does not exceed this rating. Note that the product title mentions 25V, but the specified rating is 10V; use the 10V rating for safety. Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal value, which is acceptable for most filtering applications. Operating Temperature (-40°C to 80°C): The capacitor can function within this range; avoid exceeding these limits to prevent damage. Mounting Type (Through Hole): Designed for PCB mounting with leads that pass through holes and are soldered on the opposite side. Dimensions: 20mm length and 12mm width; ensure clearance on your board.
Compatibility and Requirements
This capacitor is a standard through-hole component and requires a PCB with appropriate hole spacing and a soldering iron for installation. It is polarized, so correct orientation is essential: the negative lead must be connected to the lower potential side of the circuit. No additional accessories are required for basic operation, but ensure your circuit voltage does not exceed 10V DC. The capacitor is not suitable for AC voltage applications unless used within a properly designed circuit that accounts for polarity.
Typical Uses
Common applications include input and output decoupling in power supplies, smoothing rectified DC in DIY projects, filtering in audio amplifiers, and general purpose energy storage in electronic devices. It can also be used in DC-DC converters and industrial power supplies where a 10V rating is sufficient.
What's in the Box
Package includes: 1 x 2200uF 25V Electrolytic Capacitor.

Quick specs
- Manufacturer
- Generic
- Capacitance
- 2200uF
- Voltage Rating (V)
- 10
- Tolerance (%)
- 20
- Operating Temperature (°C)
- -40 ~ 80
- Mounting Type
- Through Hole











