
1 / 3 · Click to enlarge
AI Summary
A 22uF 16V tantalum capacitor in a through-hole DIP case with 5% tolerance. Its compact size and defined specs make it a practical choice for repair work, prototyping and PCB assembly.
Key Highlights
- 22uF capacitance at 16V DC rating
- 5% tolerance for predictable circuit behaviour
- Through-hole DIP case for easy hand soldering
- Compact footprint suits dense board layouts
- Stable operation from -5 to 51 degrees Celsius
- Polarized tantalum construction with epoxy coating
Ideal For
- Electronics repair technicians replacing a failed capacitor
- Hobbyists building circuits on breadboards and protoboards
- Students learning about polarized capacitors and through-hole assembly
- Makers assembling small-batch PCBs by hand
- Workshops keeping a stocked drawer of specific component values
Buying Tip
Check the polarity marking and confirm your circuit voltage stays well below 16V before soldering this capacitor into place.
Elecvora expert review
Our verdict
A sensible single-unit choice when you need one 22uF 16V tantalum capacitor in a hand-solderable package. The defined 5% tolerance and compact DIP body make it easy to plan around.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 22uF and 16V ratings
- Tight 5% tolerance
- Through-hole DIP is simple to solder
- Compact and lightweight
Cons
- Polarized, so orientation must be checked
- Operating range limited to -5 to 51 degrees Celsius
- Sold as a single unit only
Best for
Repair and prototyping work needing one 22uF 16V tantalum capacitor
Not ideal for
High-voltage or wide-temperature environments outside the stated range
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 22uF |
| Voltage Rating (V) | 16 |
| Case/Package | DIP |
| Tolerance (%) | 5 |
| Mounting Type | Through Hole |
| Operating Temperature (°C) | -5 ~ 51 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 22uF 16V Tantalum Capacitor DIP
Frequently Asked Questions
Is this capacitor polarized?
What voltage can it handle?
Can I use it on a breadboard?
How accurate is the capacitance?
What temperature range does it support?
How many capacitors are included?
Overview
This Generic 22uF 16V tantalum capacitor is a polarized, through-hole component supplied in a DIP case. Tantalum capacitors are known for packing high capacitance into a small volume, and this part follows that pattern: it gives you 22 microfarads of capacitance in a body that is easy to handle, insert into a breadboard or solder into a PCB.
It is a single capacitor, sold individually, which suits repair technicians and hobbyists who need one exact value rather than a bulk assortment.
Key Features
- 22uF capacitance at a 16V voltage rating for common low-voltage circuits
- 5% tolerance so the actual value stays close to the marked rating
- DIP through-hole package that works with standard protoboards and plated-through PCBs
- Operating temperature range of -5 to 51 degrees Celsius for indoor and sheltered electronics
- Compact, lightweight body with a shipping weight of just 0.001 kg
Specifications Explained
Capacitance and voltage
22uF is a mid-range value often used for local supply filtering and coupling. The 16V rating tells you the maximum DC voltage the part is intended for, so keep circuit voltages comfortably below that figure.
Tolerance
A 5% tolerance means the real capacitance should sit within a narrow band around 22uF. That is tighter than many general-purpose electrolytics and helps when a design depends on a predictable value.
Package and mounting
The DIP case with through-hole mounting is the practical choice for hand assembly. Leads pass through the board and are soldered on the reverse side, giving a mechanically secure joint without surface-mount tooling.
Temperature range
The stated operating range of -5 to 51 degrees Celsius covers typical indoor, bench and enclosed-equipment conditions. Avoid placing the part where it will be exposed to heat beyond that window.
Compatibility and Requirements
Because this is a polarized capacitor, correct orientation matters: observe the polarity marking before soldering. The through-hole DIP format fits standard 2.54 mm pitch prototyping boards and PCBs drilled for conventional lead spacing. You will need basic soldering tools and a suitable iron tip to install it. No other accessories are supplied.
Typical Uses
- Replacing a failed 22uF capacitor on a repairable board
- Breadboard prototyping and educational electronics projects
- Local decoupling and supply smoothing in low-voltage circuits
- Signal coupling where a stable, defined capacitance is needed
- Stocking a workshop parts drawer with a specific value
What's in the Box
1 x 22uF 16V Tantalum Capacitor DIP.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 22uF
- Voltage Rating (V)
- 16
- Case/Package
- DIP
- Tolerance (%)
- 5
- Mounting Type
- Through Hole











