Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single 22uF 25V aluminium electrolytic capacitor in a through-hole DIP package for PCB mounting. It handles -40 to 105°C and fits neatly into repair, prototyping and audio projects.

Key Highlights

  • 22uF capacitance with 25V DC voltage rating
  • Through-hole DIP mounting for hand soldering and rework
  • Operates from -40°C to 105°C
  • Compact 11mm length and 15mm width
  • Lightweight at approximately 1g per capacitor
  • Suitable for smoothing, coupling and decoupling circuits

Ideal For

  • Electronics repair technicians replacing failed capacitors
  • Hobbyists building prototypes on perfboard
  • Students learning through-hole soldering
  • Audio DIY enthusiasts recapping gear
  • Makers restocking common capacitor values

Buying Tip

Verify the lead spacing and available board space against the 11mm length and 15mm width before ordering, and confirm your circuit voltage never exceeds 25V.

Elecvora expert review

Our verdict

A straightforward, clearly specified 22uF 25V through-hole capacitor that covers common repair and prototyping needs. It is not a specialist low-ESR or long-life series, but for general-purpose work it is a practical choice.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear 22uF and 25V ratings suitable for many low-voltage circuits
  • Wide -40 to 105°C operating range
  • Through-hole mounting simplifies hand soldering
  • Compact 11mm by 15mm body

Cons

  • Sold as a single unit, so quantity planning is needed
  • Polarised design requires correct orientation
  • No tolerance or ESR specification is provided

Best for

General repair, prototyping and educational electronics

Not ideal for

High-voltage or precision analogue designs requiring tight tolerance

Specifications

ManufacturerGeneric
Capacitance22uF
Mounting TypeThrough Hole
Voltage Rating (V)25
Operating Temperature (°C)-40 ~ 105
Length (mm)11
Width (mm)15
Weight (g)1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 22uF 25V Through hole capacitor (DIP)

Frequently Asked Questions

Is this capacitor polarised?
Yes, aluminium electrolytic capacitors are polarised. The negative lead is usually marked with a stripe on the body, and it must be connected to the lower-potential side of the circuit.
Can I use this capacitor on a 12V supply?
Yes, a 12V supply is well within the 25V rating. Always ensure the applied voltage never exceeds 25V, including any ripple or transient peaks.
What is included in the package?
The package contains one 22uF 25V through-hole capacitor (DIP). No other accessories or mounting hardware are included.
What does the 105°C temperature rating mean?
It means the capacitor is rated to operate at ambient temperatures up to 105°C. Keeping it cooler generally supports longer service life.
How do I mount it on a PCB?
Insert the two leads through matching holes in the board, ensuring correct polarity, then solder from the underside and trim the excess lead length.
Can I use this for audio signal coupling?
Yes, 22uF is a common value for coupling in low-voltage audio circuits, provided the DC voltage across it stays within the 25V rating.

Overview

The Generic 22uF 25V Through-Hole Capacitor is a radial aluminium electrolytic component designed for printed circuit board mounting. It stores and releases electrical energy, making it useful for smoothing power rails, coupling signals between stages and decoupling local supplies. This is a single capacitor, ideal for replacement work, breadboard prototypes or keeping a few spares on hand. The through-hole leads allow secure mechanical fixing and straightforward hand soldering, which is helpful for repairs and DIY builds.

Key Features

  • 22uF capacitance: a common value for filtering and coupling in low-voltage circuits.
  • 25V rating: provides headroom for many DC supply rails up to 25 volts.
  • Through-hole DIP mounting: easy to insert, solder and replace on standard boards.
  • Wide temperature range: rated for operation from -40°C to 105°C.
  • Compact footprint: 11mm length and 15mm width suit space-constrained layouts.
  • Lightweight: approximately 1g per capacitor, with minimal impact on portable assemblies.

Specifications Explained

Capacitance (22uF): This value determines how much charge the capacitor can hold. In practice, 22uF is often used for local supply decoupling, signal coupling and low-frequency filtering. Voltage rating (25V): Always keep the applied voltage below this limit; it is a maximum, not an operating target. Operating temperature (-40 to 105°C): The capacitor can function across a broad range, so it is suitable for equipment that generates moderate heat inside an enclosure. Dimensions (11mm length, 15mm width): Check clearance around the mounting position before soldering, especially in dense boards. Weight (approx. 1g each): Negligible for most builds, but useful to know when calculating shipping or assembly weight.

Compatibility and Requirements

This capacitor requires a through-hole PCB footprint with two lead holes spaced to match the radial package. It is intended for hand soldering or wave soldering processes suitable for aluminium electrolytic capacitors. No additional accessories are included. Confirm that your circuit voltage stays at or below 25V and that the operating temperature remains within the stated -40 to 105°C range.

Typical Uses

  • Repairing or recapping audio and consumer electronics
  • Prototyping on perfboard or breadboard adapters
  • Decoupling power supplies in small projects
  • Coupling signals between amplifier stages
  • Educational and hobby electronics experiments

What's in the Box

One 22uF 25V through-hole capacitor (DIP).

Quick specs

Manufacturer
Generic
Capacitance
22uF
Mounting Type
Through Hole
Voltage Rating (V)
25
Operating Temperature (°C)
-40 ~ 105
Length (mm)
11
See all specifications