Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single 22uF 35V tantalum capacitor in a DIP through-hole package with 5% tolerance. Its compact body and hand-solderable leads make it a practical pick for prototyping, repair and general circuit work.

Key Highlights

  • 22uF capacitance at a 35V voltage rating
  • DIP case with through-hole mounting leads
  • 5% tolerance for predictable circuit behaviour
  • Compact, lightweight body suited to dense boards
  • Operating range of -5 to 50 degrees Celsius
  • Useful for repair, prototyping and educational builds

Ideal For

  • Electronics hobbyists building through-hole prototypes
  • Repair technicians replacing failed capacitors
  • Students learning component-level electronics
  • Makers stocking a bench parts drawer
  • Anyone sourcing a 22uF 35V tantalum capacitor

Buying Tip

Confirm your circuit's working voltage stays below 35V and that your board accepts a DIP through-hole footprint before ordering this single capacitor.

Elecvora expert review

Our verdict

A sensible utility part for through-hole work, offering a common 22uF value at 35V in a hand-solderable DIP case. It is a generic component, so treat it as a dependable bench staple rather than a precision-grade part.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Common 22uF 35V value covers many repair and prototyping needs
  • DIP through-hole leads are easy to solder by hand
  • 5% tolerance keeps capacitance close to the marked value
  • Compact, lightweight body suits crowded boards

Cons

  • Single unit only, so larger builds need multiple orders
  • Operating range of -5 to 50 degrees Celsius limits hot or cold environments
  • Generic brand with no additional documentation supplied

Best for

Through-hole repair, prototyping and educational electronics

Not ideal for

High-temperature or precision-grade circuit designs

Specifications

ManufacturerGeneric
Capacitance22uF
Voltage Rating (V)35
Case/PackageDIP
Tolerance (%)5
Mounting TypeThrough Hole
Operating Temperature (°C)-5 ~ 50
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 22uF 35V Tantalum Capacitor DIP

Frequently Asked Questions

Is this capacitor polarised?
Yes. Tantalum capacitors are polarised, so the positive lead must match the positive side of your circuit. Check the marking on the body before soldering.
Can I use it above 35V?
No. The 35V figure is the rated voltage, so keep your circuit's working voltage below it to avoid stressing the part.
How many capacitors are included?
One capacitor is supplied. If you need several for a build, order the quantity your project requires.
Does it fit a breadboard?
It is a through-hole DIP part, so it can be inserted into a breadboard or perfboard provided the lead spacing matches the hole pattern.
What temperature range does it support?
The stated operating range is -5 to 50 degrees Celsius, so it is best suited to indoor and temperature-controlled environments.
Do I need any accessories to install it?
You will need a soldering iron and solder for permanent installation. No tools or accessories are included with the capacitor.

Overview

This 22uF 35V tantalum capacitor is a passive electrolytic component supplied in a DIP case for through-hole mounting. Tantalum construction allows a comparatively high capacitance to fit inside a small body, which is why these parts are common where board space is limited but a stable capacitance value is still needed. The component has a 5% tolerance and is rated for operation between -5 and 50 degrees Celsius.

Each unit is a single capacitor, making it a straightforward choice for replacing a failed part, stocking a bench drawer or building a circuit from scratch.

Key Features

  • 22uF capacitance at a 35V rating for general circuit use
  • DIP through-hole package that is easy to place and hand solder
  • 5% tolerance for consistent behaviour across builds
  • Compact and lightweight at roughly 0.001 kg shipping weight
  • Operating temperature range of -5 to 50 degrees Celsius
  • Generic manufacture for budget-conscious repair and prototyping

Specifications Explained

Capacitance (22uF) describes how much charge the part can store. This value is common in filtering, coupling and timing roles, so it is a useful size to keep on hand.

Voltage rating (35V) is the maximum working voltage the capacitor is rated for. Stay comfortably below this figure in your design so the part is not stressed.

Tolerance (5%) means the actual capacitance should sit close to the marked 22uF value, which helps when the circuit depends on a predictable result.

DIP case and through-hole mounting mean the leads pass through holes in the board and are soldered on the reverse side. This is friendly to hand tools and rework.

Operating temperature (-5 to 50 degrees Celsius) sets the comfortable working window for this part, so plan for indoor or temperature-controlled environments.

Compatibility and Requirements

This capacitor is intended for through-hole boards and prototyping surfaces that accept a DIP-style component. Fitting it requires a soldering iron, solder and basic hand tools; no other accessories are included. Check that your circuit's working voltage stays within the 35V rating and that the operating environment sits inside the stated temperature range before installing the part.

Typical Uses

  • Replacing a failed 22uF 35V capacitor on a through-hole board
  • Breadboard and perfboard prototyping
  • Educational electronics kits and classroom demonstrations
  • General filtering and coupling roles in low-voltage circuits
  • Bench stock for repair technicians and hobbyists

What's in the Box

One 22uF 35V tantalum capacitor in a DIP package. Nothing else is supplied.

Quick specs

Manufacturer
Generic
Capacitance
22uF
Voltage Rating (V)
35
Case/Package
DIP
Tolerance (%)
5
Mounting Type
Through Hole
See all specifications