Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A radial through-hole aluminium electrolytic capacitor rated 22uF at 450V with 20% tolerance. Its high voltage rating and compact 26 x 16 mm body make it useful for smoothing and filtering in power supply sections.

Key Highlights

  • 22uF capacitance at a 450V DC voltage rating
  • 20% tolerance for general-purpose circuit work
  • Radial through-hole mounting for PCB assembly
  • Operating range of -40 to 80°C
  • Compact body about 26 mm long and 16 mm wide
  • Lightweight at roughly 4 g per capacitor

Ideal For

  • Electronics hobbyists building or repairing power supply circuits
  • Repair technicians replacing high-voltage electrolytic capacitors
  • Designers prototyping DC-DC converter and filtering stages
  • Students learning about polarized electrolytic components
  • Makers maintaining indoor electronic equipment

Buying Tip

Check the lead spacing and available board clearance against the 26 mm length and 16 mm width before ordering, and confirm your circuit's DC voltage stays below 450V.

Elecvora expert review

Our verdict

A straightforward high-voltage, low-capacitance electrolytic that covers common smoothing and filtering jobs. It is a sensible spare to keep for repair work, provided you respect polarity and the 80°C upper limit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 450V rating suits elevated DC voltage sections
  • Compact 26 x 16 mm body
  • Standard radial through-hole mounting
  • Wide -40 to 80°C operating range

Cons

  • Polarized, so reverse connection will damage it
  • 20% tolerance limits precision applications
  • Upper temperature limit of 80°C restricts hot environments

Best for

Smoothing, filtering and decoupling in power supplies and DC-DC stages

Not ideal for

Precision timing circuits or applications above 80°C

Specifications

ManufacturerGeneric
Capacitance22uF
Voltage Rating (V)450
Tolerance (%)20
Operating Temperature (°C)-40 ~ 80
Mounting TypeThrough Hole
Length (mm)26
Width (mm)16
Weight (g)4 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 22uF 450V Electrolytic Capacitor

Frequently Asked Questions

Can this capacitor be used with AC voltage?
No. It is a polarized aluminium electrolytic capacitor and must be operated with DC voltage applied using the correct polarity.
What does the 450V rating mean?
It is the maximum DC working voltage. Keep the applied voltage below this figure and never exceed it.
How accurate is the capacitance?
The tolerance is 20%, so the actual value can vary within that band around 22uF. This is normal for electrolytic parts.
What is the operating temperature range?
The capacitor is rated for -40 to 80°C, so check the local temperature near your mounting position.
How many capacitors are included?
The package contains one 22uF 450V electrolytic capacitor.
How should I store it?
Keep it in a dry place away from heat and moisture, and avoid bending the leads before installation.

Overview

This aluminium electrolytic capacitor is a polarized, radial through-hole component rated at 22uF with a 450V voltage rating and 20% tolerance. It uses an aluminium oxide dielectric with an electrolyte as the second electrode, the construction behind the familiar cylindrical can shape. With a body around 26 mm long and 16 mm wide and a weight of about 4 g, it is a compact part for its voltage class and can be placed on boards where space is limited.

Key Features

  • High voltage rating: 450V suits circuits that run at elevated DC voltages.
  • Low capacitance: 22uF is a modest value, appropriate where only light smoothing or filtering is needed.
  • Through-hole mounting: radial leads make it straightforward to fit on plated-through boards and prototype boards.
  • Wide operating range: rated for -40 to 80°C.
  • Light and compact: about 4 g each, 26 mm long and 16 mm wide.

Specifications Explained

Capacitance and voltage: 22uF describes how much charge the part stores, and 450V is the maximum DC working voltage. Always keep the applied voltage comfortably below the rating and never reverse the polarity, because electrolytic capacitors are polarized and can fail if connected the wrong way.

Tolerance: the 20% tolerance means actual capacitance can sit within a fairly broad band around the nominal value. That is normal for electrolytic parts and is fine for smoothing, filtering and decoupling roles rather than precision timing.

Temperature: the -40 to 80°C range covers typical indoor equipment and many enclosed power supplies, but it is worth checking local heat near the mounting position.

Size and weight: at 26 mm by 16 mm and about 4 g, the body is easy to plan around, though the lead spacing and can diameter should be checked against your board footprint before ordering.

Compatibility and Requirements

The capacitor is a through-hole part, so it needs a board with suitable holes and enough clearance around the can. It requires DC voltage applied with correct polarity. No other accessories or mounting hardware are included.

Typical Uses

  • Input and output smoothing in power supplies
  • Filtering and decoupling in DC-DC converter stages
  • Buffering rectified DC voltages in electronic devices
  • Repair and replacement work in high-voltage sections
  • Prototyping and educational electronics projects

What's in the Box

One 22uF 450V electrolytic capacitor. The product image may differ from the item supplied.

Quick specs

Manufacturer
Generic
Capacitance
22uF
Voltage Rating (V)
450
Tolerance (%)
20
Operating Temperature (°C)
-40 ~ 80
Mounting Type
Through Hole
See all specifications