
1 / 2 · Click to enlarge
At a glance
This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Serial Port Module; shipping weight 0.003 kg. Check that your power source supplies 3 to 5.5V before connecting it.
Key Highlights
- Model No. / Name: Serial Port Module
- Shipping Weight: 0.003 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Serial Port Module |
|---|---|
| Power Supply Voltage (V) | 3 to 5.5V |
| Shipping Weight | 0.003 kg |
| Shipping Dimensions | 6 × 5 × 1 cm |
Overview
The 3 EXAR Chip RS232 SP3232 TTL to RS232 RS232 to TTL Brush Cable Serial Port Module Sink Gold Plate is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Serial Port Module (confirm your cable or board uses the same connector)
- Power Supply Voltage (V): 3 to 5.5V (match this to your power supply; too high a voltage can damage the part)
- Shipping Weight: 0.003 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 5 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Three modules in one pack
- Type: Voltage Regulator
- EXAR SP3232 chips for reliable data conversion
- Bidirectional conversion between TTL and RS232
- Gold-plated connectors for enhanced durability and signal quality
- Ideal for electronic projects and applications requiring serial communication.
Specifications:
TTL (UART) side:
- VCC: Connect DC 3V to 5.5V
- GND: Connect to GND
- TXD: Connect the TTL end of the external device RXD
- RXD: connect external device TTL end TXD
RS232 port:
- RXD: Connect external equipment RS232 TXD terminal
- TXD: Connect the RS232 terminal of the external device RXD
- GND: Connect to GND
Package Includes:
1 x Serial port moduleQuick specs
- Model No. / Name
- Serial Port Module
- Power Supply Voltage (V)
- 3 to 5.5V
- Shipping Weight
- 0.003 kg
- Shipping Dimensions
- 6 × 5 × 1 cm













