Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The 3386P 100 Ohm trimpot is a through-hole single-turn potentiometer for precise PCB preset adjustments. Its ±10% tolerance and wide -55 to 125°C range make it reliable for calibration and fine-tuning tasks.

Key Highlights

  • 100 Ohm resistance with ±10% tolerance for predictable preset values
  • Single-turn adjustment via screwdriver for quick tuning
  • Through-hole mounting for secure PCB installation
  • Wide operating temperature range of -55°C to 125°C
  • Compact 9.5mm × 9.5mm footprint fits dense boards
  • Low weight of approximately 0.1g per unit

Ideal For

  • Electronics hobbyists building and tuning prototypes
  • Repair technicians replacing through-hole trimpots
  • Design engineers needing preset adjustment on PCBs
  • Students learning about variable resistors and calibration

Buying Tip

Confirm your PCB uses through-hole mounting and that a 100 Ohm range suits your adjustment needs before ordering.

Elecvora expert review

Our verdict

A straightforward through-hole trimpot that does its job without fuss. The 100 Ohm value and single-turn design make it a practical choice for simple preset adjustments.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy to solder and mount on through-hole boards
  • Wide operating temperature range
  • Compact and lightweight
  • Simple screwdriver adjustment

Cons

  • Single-turn design offers less precision than multi-turn types
  • Requires soldering equipment
  • Tolerance of ±10% may be too loose for critical applications

Best for

General-purpose PCB calibration and prototyping

Not ideal for

High-precision or surface-mount designs

Specifications

Resistance (Ohm)100
Tolerance (%)10
Temperature Coefficient±100ppm/℃
Operating Temperature (°C)-55 to 125
Mounting TypeThrough Hole
Length (mm)9.5
Width (mm)9.5
Weight (g)0.1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 3386P 100 Ohm Trimpot Trimmer Potentiometer

Frequently Asked Questions

How do I adjust this trimpot?
Use a small flathead screwdriver to turn the adjustment slot on top. Turn clockwise or counterclockwise to increase or decrease resistance.
Can this be used on a breadboard?
Yes, the through-hole leads can be inserted into a breadboard for temporary prototyping.
What is the power rating?
The product data does not specify a power rating. Consult the manufacturer's datasheet for that information.
Is a knob included?
No, this trimpot is adjusted with a screwdriver and does not include a knob.
How should I clean the trimpot?
Avoid harsh solvents. If cleaning is needed, use a mild electronics cleaner and allow it to dry completely before use.

Overview

The 3386P 100 Ohm Trimpot Trimmer Potentiometer is a single-turn, through-hole component built for making precise preset adjustments on printed circuit boards. It allows you to dial in a specific resistance value during calibration or tuning, then leave it set. The 100 Ohm resistance and ±10% tolerance give you a defined range for circuit tweaks, while the ±100ppm/°C temperature coefficient helps maintain stability as conditions change.

Key Features

  • Single-turn adjustment: A screwdriver slot enables quick, repeatable setting of the wiper position.
  • Through-hole mounting: Leads are designed for soldering into plated through-holes, providing a mechanically strong joint.
  • Wide temperature range: Operates from -55°C to 125°C, suitable for many environments.
  • Compact size: The 9.5mm × 9.5mm body and low weight (about 0.1g) help save board space.

Specifications Explained

Resistance (100 Ohm): This is the total end-to-end resistance. It is useful for low-value adjustments in signal paths or current limiting.

Tolerance (±10%): The actual resistance may vary by up to 10% from the nominal value, so account for this in your design margin.

Temperature Coefficient (±100ppm/°C): For every degree Celsius change, the resistance may shift by up to 100 parts per million, which is modest for general-purpose trimmers.

Operating Temperature (-55°C to 125°C): The component can function across a broad range, from cold outdoor conditions to warm enclosures.

Mounting Type (Through Hole): Requires a PCB with holes and soldering equipment; not suited for surface-mount assembly.

Compatibility and Requirements

This trimpot is intended for through-hole PCB mounting. You will need a soldering iron and basic hand tools. A small flathead screwdriver is required for adjustment. No additional hardware is included.

Typical Uses

  • Calibration and bias setting in analog circuits
  • Fine-tuning sensor or reference voltages
  • Educational and prototyping projects
  • Repair and replacement in existing through-hole boards

What's in the Box

One 3386P 100 Ohm Trimpot Trimmer Potentiometer.

Quick specs

Resistance (Ohm)
100
Tolerance (%)
10
Temperature Coefficient
±100ppm/℃
Operating Temperature (°C)
-55 to 125
Mounting Type
Through Hole
Length (mm)
9.5
See all specifications