Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2KΩ wirewound potentiometer with a 10-turn adjustment mechanism for fine, repeatable resistance setting. Its 2W rating, ±5% tolerance and panel-mount metal shaft suit calibration and control circuits.

Key Highlights

  • 10-turn rotary mechanism for fine resistance resolution
  • 2KΩ wirewound element rated at 2W
  • ±5% resistance tolerance and 450V maximum input
  • 6.2mm round metal shaft, 13mm long
  • Enclosed body for panel mounting
  • Nut and washer pair included

Ideal For

  • Electronics engineers building calibration and test fixtures
  • Technicians servicing analog and industrial control panels
  • Makers and students learning precision circuit adjustment
  • Designers needing a panel-mount multi-turn trim control
  • Repair work requiring a 2KΩ wirewound potentiometer

Buying Tip

Check that your circuit's expected power dissipation stays within the 2W rating and that your panel cutout fits the mounting body before ordering.

Elecvora expert review

Our verdict

A solid choice when you need a 2KΩ panel control with genuinely fine adjustment and a wirewound element. The 10-turn mechanism and enclosed body make it practical for calibration and control work, provided your circuit stays within its 2W and 450V limits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Ten-turn adjustment gives fine, repeatable setting
  • Wirewound element with a 2W power rating
  • Enclosed body suits panel mounting
  • Metal 6.2mm round shaft with nut and washer included

Cons

  • No knob or dial supplied
  • Requires panel cutout and wiring work
  • Single resistance value only, so plan your circuit around 2KΩ

Best for

Calibration trims, test fixtures and analog control panels needing fine 2KΩ adjustment

Not ideal for

High-power circuits or applications needing a different resistance value

Specifications

Shipping Weight0.018 kg
Shipping Dimensions8 × 5 × 4 cm

What's in the box

  • 1 x 3590S-2-202L 2KΩ Precision Multi-turn Adjustable Potentiometer
  • 1 x Nut and Washer Pair

Frequently Asked Questions

What does the 10-turn mechanism mean for adjustment?
The full 2KΩ range is spread across ten shaft rotations, so each turn changes resistance gradually. This makes fine tuning and returning to a setting easier than with a single-turn control.
What are the power and voltage limits?
The potentiometer has a 2W power rating and a 450V maximum input voltage. Keep your circuit within both limits and verify actual dissipation in your design.
What shaft size does it have?
It uses a 6.2mm diameter round metal shaft that is 13mm long. Choose a knob or coupling that fits that shaft size.
How is it mounted?
The body is designed for panel mounting, and a nut and washer pair is included. You will need a suitable panel cutout for the mounting body.
What is included with the potentiometer?
The package contains one 3590S-2-202L 2KΩ precision multi-turn potentiometer and one nut and washer pair. No knob or wiring is supplied.
How should I care for it?
Keep the enclosed body clean and dry, avoid turning the shaft beyond its mechanical stops, and do not exceed the 2W or 450V ratings.

Overview

The 3590S-2-202L is a precision multi-turn potentiometer from the 3590S series. It provides a 2KΩ resistance range that is adjusted across ten full shaft rotations, giving technicians and designers a much finer control step than a standard single-turn part. The wirewound construction and enclosed body are intended for stable, repeatable settings in analog and industrial electronics.

Key Features

  • 10-turn rotary adjustment for precise resistance setting
  • 2KΩ wirewound element with a 2W power rating
  • ±5% resistance tolerance
  • 450V maximum input voltage
  • 6.2mm diameter round metal shaft, 13mm in length
  • Panel-mount body with included nut and washer pair

Specifications Explained

Resistance and tolerance

The 2KΩ value sets the range you can dial in, while the ±5% tolerance tells you how far the actual end-to-end resistance may sit from the nominal figure. For trim and calibration work, that is a useful starting point to check against your circuit requirements.

Ten-turn adjustment

Because the full range is spread over ten rotations, small shaft movements produce small resistance changes. This makes it easier to return to a setting and to fine-tune a circuit without overshooting.

Power and voltage

The 2W power rating and 450V maximum input voltage define the electrical envelope for the part. Keep your application within both limits and confirm the actual dissipation in your circuit.

Shaft and mounting

The 6.2mm round metal shaft is 13mm long and pairs with a panel-mount body. The included nut and washer secure the potentiometer to a panel or bracket.

Compatibility and Requirements

This is a passive panel-mount potentiometer, so it works with circuits designed for a 2KΩ, 10-turn wirewound control. You will need a suitable knob or coupling for the 6.2mm round shaft, a panel cutout that matches the mounting body, and wiring to your circuit. No other accessories are supplied beyond the nut and washer pair.

Typical Uses

  • Calibration and trim adjustments in test equipment
  • Analog circuit tuning and reference setting
  • Automation and control panel adjustments
  • Educational and prototyping work requiring fine resistance control

What's in the Box

  • 1 x 3590S-2-202L 2KΩ precision multi-turn potentiometer
  • 1 x nut and washer pair

Quick specs

Shipping Weight
0.018 kg
Shipping Dimensions
8 × 5 × 4 cm
See all specifications