
1 / 3 · Click to enlarge
AI Summary
A 500Ω wirewound potentiometer with a 10-turn adjustment mechanism for fine, repeatable resistance setting. Its 2W rating, ±5% tolerance and panel-mount 6.2mm metal shaft make it a solid choice for calibration and analog control work.
Key Highlights
- 500Ω wirewound element with ±5% resistance tolerance
- 10-turn rotary adjustment for fine, repeatable resolution
- 2W power rating and 450V maximum input voltage
- 6.2mm round metal shaft, 13mm long, panel mount
- Enclosed body for stable performance in industrial settings
- Includes nut and washer pair for mounting
Ideal For
- Electronics engineers building calibration and test fixtures
- Technicians servicing analog and industrial control panels
- Makers and students needing fine, repeatable resistance adjustment
- Designers prototyping circuits with trim and offset settings
Buying Tip
Check that 500Ω and a 10-turn range suit your circuit before ordering, and measure the actual end-to-end resistance if your design depends on a precise value within the ±5% tolerance.
Elecvora expert review
Our verdict
A dependable precision part for anyone who needs fine, repeatable resistance control in a panel-mounted format. The 10-turn wirewound design and 2W rating cover a lot of calibration and analog trimming work at a modest cost.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 10-turn mechanism gives genuinely fine resolution
- Wirewound element with a 2W power rating
- Enclosed body protects the internal element
- Standard 6.2mm metal shaft fits common knobs
- Nut and washer included for mounting
Cons
- Round shaft needs a grub-screw or friction knob
- No knob, wire or connectors included
- Actual resistance can vary within ±5% of nominal
Best for
Calibration, test equipment and analog trimming where repeatable fine adjustment matters
Not ideal for
Quick single-turn volume-style controls or high-volume production panels needing automated assembly
Specifications
| Shipping Weight | 0.018 kg |
|---|---|
| Shipping Dimensions | 8 × 5 × 4 cm |
What's in the box
- 1 x 3590S-2-501L 500Ω Precision Multi-Turn Adjustable Potentiometer
- 1 x Nut and Washer Pair
Frequently Asked Questions
What does the 10-turn mechanism actually do?
Can I use it as a simple variable resistor?
What are the power and voltage limits?
Will the shaft fit my existing knob?
What is included with the potentiometer?
How should I care for it?
Overview
The 3590S-2-501L is a precision multi-turn potentiometer from the 3590S series, offering a 500Ω resistance value in a panel-mount package. Instead of covering its range in a single rotation, it uses a 10-turn mechanism so the wiper travels gradually across the wirewound element. That makes small resistance changes easier to dial in and easier to repeat, which matters when a circuit needs accurate trimming rather than rough adjustment.
The metal round shaft measures 6.2mm in diameter and 13mm in length, and the enclosed body helps protect the internal element during everyday use. A nut and washer pair is supplied for mounting.
Key Features
- 10-turn adjustment: fine resolution across the full 500Ω range
- Wirewound construction: stable resistance behaviour and long service life
- 2W power rating: handles more than a typical small trimmer
- ±5% tolerance: predictable resistance value for design work
- 450V maximum input voltage: suits higher-voltage analog circuits
- Panel-mount metal shaft: 6.2mm diameter, 13mm length, round profile
Specifications Explained
Resistance (500Ω): a low value that suits circuits where only a modest resistance span is needed, such as setting reference levels or trimming offsets.
10-turn mechanism: each full rotation covers roughly one tenth of the range, so the same small shaft movement always produces a small resistance change. This is what separates a precision multi-turn part from a single-turn trimmer.
Power rating (2W): indicates how much power the element can dissipate. Stay within this figure and the part will behave consistently.
Tolerance (±5%): the actual end-to-end resistance may differ slightly from the nominal 500Ω, so measure the part if your design depends on an exact value.
Maximum input voltage (450V): the upper voltage limit for the element; do not exceed it.
Shaft (6.2mm round, 13mm long): a common size for knobs and panel fittings. The round profile means a knob relies on a grub screw or friction fit rather than a flattened shaft.
Compatibility and Requirements
The part is panel mounted using the supplied nut and washer, and the 6.2mm round metal shaft accepts standard knobs of matching bore. Wiring depends on your circuit: the three terminals are used as a variable divider or as a two-terminal variable resistance. No other accessories are included beyond the nut and washer pair, so plan for wire, solder and a suitable knob separately.
Typical Uses
- Calibration and trimming in test and measurement equipment
- Setting reference voltages and offsets in analog circuits
- Automation and control panels needing repeatable adjustment
- Prototype and educational builds where fine tuning is required
- Industrial electronics requiring a stable, enclosed control
What's in the Box
- 1 x 3590S-2-501L 500Ω precision multi-turn adjustable potentiometer
- 1 x nut and washer pair













