Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This fpv and telemetry transmitter-receivers is a good fit for RC and FPV hobbyists. Main specs: item type Kit; frequency (ghz) 0.43; power rating 500mW. Check that your power source supplies 3 ~ 6 before connecting it.

Key Highlights

  • Small and easy to carry or mount
  • Item Type: Kit
  • Frequency (GHz): 0.43
  • Power Rating: 500mW

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeKit
Frequency (GHz)0.43
Range2500 m
Power Rating500mW
Receive sensitivity-124 dBm
Operating Voltage (VDC)3 ~ 6
Max. Operating Current (A)500
Operating Temperature (°C)-24 to 84
Size (mm)54 x 260 x 12
Length (mm)110
Weight (g)33
Shipping Weight0.037 kg
Shipping Dimensions10 × 6 × 5 cm

Overview

The 3DR Single TTL MINI Radio Telemetry 433MHz 500mW for PIXHAWK and APM FC is listed in our fpv and telemetry transmitter-receivers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Kit
  • Frequency (GHz): 0.43 (make sure the rest of your system works at this frequency)
  • Range: 2500 m (quoted range is usually line-of-sight; walls and interference shorten it)
  • Power Rating: 500mW
  • Receive sensitivity: -124 dBm
  • Operating Voltage (VDC): 3 ~ 6 (match this to your power supply; too high a voltage can damage the part)
  • Max. Operating Current (A): 500 (your supply must deliver at least this much current)
  • Operating Temperature (°C): -24 to 84

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This 3DR Radio Telemetry 433MHz 500mW Set allows you to link to a flight controller to a USB or UART equipped device such as a computer, laptop or tablet supporting a USB connection (OTG).

The new V2 radios, no longer have a separate Air/Ground module, as both transceivers can use UART or USB connections and supports both modes. The Radio set not only lets you see live data, such as live GPS position overlaid on a map, system voltage, heading, waypoint navigation even artificial horizon and so much more.

Using open source MAVlink based ground station software, you can even fly your aircraft with a joystick via your computer and update settings live! Or just use it for your DIY projects that need a wireless Serial interface. This kit offers a great low price, longer range, and superior performance. The system utilizes the 433MHz band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware.

Note: The reference to APM refers to the ArduPilot project, a family of open source autopilots based on the Arduino open-source computing platform, developed by 3DR and the open source community. It consists of a choice of ArduPilot Mega (APM) electronics and a range of free software versions for different vehicles and is governed by an open source creative commons license.

Important Note:  Do not turn ON the 3DR telemetry without attaching the antenna. Note : Product may be available with casing or without casing

Features :

  1. MAVLink protocol framing status documents
  2. Frequency modulation and Spread Spectrum (FHSS)
  3. Self-adaption to time division multiplexing
  4. Support LBT and AFA
  5.  Configurable duty cycle
  6. Built-in error correcting code(up to 25% data bit error)
  7. AT command configure data transmission
  8. RT command remote control data transmission
  9. Interchangeable air and ground 433MHz modules
  10.  Micro-USB port
  11. 6-position Molex connector
  12. 250mW maximum output power (adjustable)
  13. SMA connector
  14. 2-way full-duplex communication through adaptive TDM
  15. UART interface
  16. Transparent serial link
  17. Open-source SIK firmware
  18. Configurable through *Mission Planner and *APM Planner
  19. Based on the HM-TRP wireless module, with Si1000 8051 microcontroller and Si4432

Package Includes :

1 x Radio Telemetry Base Station (USB Connection). 1 x Telemetry Transreceiver (Pin Header). 2 x 2.5dbi Antenna. 1 x 5-pin Lead cable for APM FC. 1 x 6-pin Lead cable for PIXHAWK FC.

Quick specs

Item Type
Kit
Frequency (GHz)
0.43
Range
2500 m
Power Rating
500mW
Receive sensitivity
-124 dBm
Operating Voltage (VDC)
3 ~ 6
See all specifications