Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This five-pack of 3V 3mm RGB quick flash LED indicators comes pre-wired with 20cm cables for easy installation. Each LED automatically cycles through red, green and blue, making it ideal for status panels and DIY electronics projects.

Key Highlights

  • 3mm water clear RGB LED with automatic quick flash colour cycling
  • 3V voltage rating suits low-power electronic circuits
  • Pre-wired with 20cm cable for quick and easy installation
  • Pack of 5 provides spares for multiple projects
  • Compact and lightweight design fits tight spaces
  • Ideal for panel indicators, model lighting, and DIY gadgets

Ideal For

  • Electronics hobbyists building custom panels
  • RC modelers adding scale lighting
  • DIY enthusiasts creating visual indicators
  • Makers designing status displays
  • Students learning about LED circuits

Buying Tip

Confirm your power source is 3V DC; if using a higher voltage, add a resistor to prevent damaging the LED.

Elecvora expert review

Our verdict

These pre-wired RGB quick flash LEDs are a practical choice for adding attention-grabbing indicators without complex wiring. The 3V rating and compact size make them versatile for small projects, though users must ensure correct voltage.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-wired with 20cm cable saves assembly time
  • Automatic colour cycling needs no controller
  • Compact 3mm size fits tight spaces
  • Pack of five offers good value

Cons

  • Requires 3V supply; higher voltages need a resistor
  • No datasheet or resistor included
  • Limited to quick flash pattern only

Best for

DIY electronics and model makers needing simple RGB indicators

Not ideal for

Applications requiring steady or customisable light patterns

Specifications

Voltage Rating (V)3
Size (mm)3
Model No. / NameQuick Flash LED Indicator
Cable Length20 CM
LED Size (mm)3
ColorRGB
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 5 x 3V 3mm RGB Quick Flash LED Indicator with 20cm cable

Frequently Asked Questions

What voltage do these LEDs require?
They are rated at 3V. Do not exceed this without a current-limiting resistor.
Are resistors included?
No, resistors are not included. You must add one if your supply is above 3V.
How many LEDs are in the pack?
The pack contains five pre-wired RGB quick flash LED indicators.
What is the cable length?
Each LED comes with a 20cm cable attached.
Can I cut the cable to shorten it?
Yes, you can cut and strip the cable to the desired length, but ensure proper connection afterwards.
Do these LEDs need a driver or controller?
No external controller is needed; the quick flash sequence is built into the LED.

Overview

The 3V 3mm Water Clear RGB Quick Flash LED Indicator is a compact, pre-wired indicator light that automatically cycles through red, green and blue colours. Each LED is supplied with a 20cm cable, so you can connect it directly to your circuit without additional wiring. This pack of five gives you multiple units for larger projects or spares for future builds.

These indicators are designed for use in electronic equipment where a visible status signal is needed. The quick flash pattern draws attention without requiring a separate flashing circuit, making them a convenient choice for panel displays, model lighting, and DIY electronics.

Key Features

  • RGB quick flash: Automatically cycles through red, green and blue for a dynamic visual indicator.
  • 3mm water clear lens: Compact size with a clear lens for bright, visible light output.
  • 3V rating: Suitable for low-voltage circuits and battery-powered projects.
  • 20cm pre-wired cable: Saves time and simplifies installation.
  • Pack of five: Provides multiple indicators for complex builds or replacements.

Specifications Explained

Voltage Rating (3V): This LED is designed to operate at 3V. Check that your power source matches this rating to avoid damage. If your supply is higher, you may need a suitable resistor (not included) to limit current.

Size (3mm): The 3mm diameter makes these LEDs suitable for small panels and tight spaces. The water clear lens ensures maximum light transmission.

Cable Length (20cm): The pre-attached 20cm cable gives you enough length to route the LED to your desired location without soldering directly to the LED body.

RGB Colour: The LED produces red, green and blue light in a quick flash sequence. This is achieved internally, so no external controller is needed.

Compatibility and Requirements

These LEDs require a 3V DC power source. They do not include a resistor or driver; if your supply exceeds 3V, you must add appropriate current limiting. The pre-wired cable ends are ready for connection to your circuit. No other accessories are included.

Typical Uses

  • Status indicators on control panels and equipment
  • Model lighting for RC vehicles and dioramas
  • DIY electronics projects and breadboard prototypes
  • Visual alarms in small devices
  • Decorative lighting for costumes and props

What's in the Box

Five pre-wired RGB quick flash LED indicators, each with a 20cm cable.

Quick specs

Voltage Rating (V)
3
Size (mm)
3
Model No. / Name
Quick Flash LED Indicator
Cable Length
20 CM
LED Size (mm)
3
Color
RGB
See all specifications