
1 / 3 · Click to enlarge
AI Summary
A 3V 8mm water clear RGB quick flash LED indicator with a pre-attached 20cm cable. It gives a compact, self-flashing multicolour status light for panels, circuits and DIY projects.
Key Highlights
- 3V rated LED indicator for low-voltage circuits and panels
- 8mm water clear lens for a compact, bright visual signal
- RGB quick flash output cycles colours automatically
- Pre-attached 20cm cable simplifies installation and wiring
- Lightweight build suited to small control boxes and projects
- Easy to install in hobby, model and equipment builds
Ideal For
- Makers building status indicators into control boxes
- Hobbyists adding flashing lights to model and RC projects
- Technicians marking power or operation status on equipment
- Students working on low-voltage electronics projects
- DIY builders needing a compact multicolour panel light
Buying Tip
Confirm your circuit can supply the 3V rating before wiring, since connecting this indicator to a higher voltage without a suitable supply will not match its specification.
Elecvora expert review
Our verdict
A practical little indicator for builders who want a self-flashing multicolour signal without extra circuitry. Its attached cable and 8mm clear lens make it easy to fit into small panels and hobby enclosures.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Self-flashing RGB output needs no separate flash circuit
- Pre-attached 20cm cable speeds up wiring
- Compact 8mm body suits small panels
- Lightweight and simple to install
Cons
- Only rated for 3V, so supply matching is essential
- No connector, bezel or mounting hardware included
- Single unit only, not a multi-pack
Best for
Small low-voltage panels and DIY electronics needing a flashing status light
Not ideal for
Higher-voltage installations or users wanting a steady single-colour indicator
Specifications
| Voltage Rating (V) | 3 |
|---|---|
| Additional Specs. | Cable |
| LED Size (mm) | 8 |
| Cable Length | 20 |
| Color | RGB |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 3V 8mm Water Clear RGB Quick Flash LED Indicator Light with 20CM Cable
Frequently Asked Questions
What voltage does this LED indicator need?
Does it flash by itself?
How long is the cable?
What size is the LED?
How many indicators are included?
Do I need to solder it?
Overview
This 8mm LED indicator light is designed to give a clear visual status signal on circuits, control panels and small electronic builds. The water clear lens houses an RGB LED that runs in quick flash mode, so it cycles through colours on its own instead of showing one fixed colour. A 20cm cable comes already attached, which makes it quick to route and connect inside an enclosure.
Key Features
- 3V voltage rating for low-voltage indicator use
- 8mm LED body with a water clear lens
- RGB quick flash light output
- 20cm cable attached for easier wiring
- Lightweight and compact for tight spaces
- Straightforward to install in DIY and equipment projects
Specifications Explained
Voltage rating: The 3V rating tells you this indicator is built for a 3V supply. Match it to your circuit or driver rather than connecting it to a higher voltage directly.
LED size: At 8mm, the LED body is larger than common 3mm or 5mm types, so it occupies a slightly wider opening but remains easy to see on a panel.
Colour and flash mode: The RGB quick flash design produces a repeating multicolour flash sequence, useful where you want an attention-drawing status light rather than a steady glow.
Cable: The supplied 20cm cable gives usable reach inside small enclosures and reduces the need for extra wire runs during assembly.
Compatibility and Requirements
This indicator is intended for 3V operation. You will need a suitable 3V supply and a way to connect the attached cable, such as soldering or a compatible connector arrangement in your own build. No connector type, mounting bezel or driver is supplied or specified, so plan your installation around the bare cable and the 8mm LED body.
Typical Uses
Common applications include status indication on control panels, power or operation indicators on small devices, model and hobby electronics, test rigs, instrumentation and DIY projects that need a compact flashing signal light.
What's in the Box
- 1 x 3V 8mm water clear RGB quick flash LED indicator light with 20cm cable
Quick specs
- Voltage Rating (V)
- 3
- Additional Specs.
- Cable
- LED Size (mm)
- 8
- Cable Length
- 20
- Color
- RGB
- Shipping Weight
- 0.001 kg












