
1 / 3 · Click to enlarge
AI Summary
A pack of five 3V 8mm water clear RGB slow flash LED indicators, each with a 20cm pre-wired cable. The slow flashing RGB effect provides an attention-grabbing status indicator for panels, circuits, and hobby projects.
Key Highlights
- 3V operation for low-voltage DC circuits
- 8mm water clear lens for bright, uniform light
- RGB slow flash colour cycling effect
- 20cm pre-attached cable for easy wiring
- Pack of 5 for multiple installations
- Compact and lightweight design
Ideal For
- Electronics hobbyists building custom circuits
- Technicians adding status indicators to panels
- DIY enthusiasts working on model projects
- Product designers prototyping device interfaces
- Educators teaching basic electronics
Buying Tip
Verify your power source is 3V DC; if using a higher voltage, calculate and add a current-limiting resistor to prevent LED damage.
Elecvora expert review
Our verdict
These pre-wired RGB slow flash LEDs are a convenient solution for adding attention-grabbing status indicators to low-voltage projects. The 3V rating and 20cm cable make them easy to integrate, though users must ensure proper voltage regulation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-wired with 20cm cable saves assembly time
- Slow flash RGB effect is self-contained
- Compact 8mm size fits standard panel holes
- Pack of five offers good value for multiple uses
Cons
- Requires 3V DC supply; higher voltages need a resistor
- No datasheet or detailed wiring diagram included
- Bare wire ends may require soldering or connectors
Best for
Hobbyists and technicians needing a simple, pre-wired flashing indicator for low-voltage circuits.
Not ideal for
Applications requiring constant (non-flashing) light or high-voltage operation without additional components.
Specifications
| Voltage Rating (V) | 3 |
|---|---|
| Size (mm) | 8 |
| Additional Specs. | Cable |
| Model No. / Name | Slow Flash LED Indicator |
| Cable Length | 20 CM |
| LED Size (mm) | 8mm |
| Color | RGB |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 5 x 3V 8mm Water Clear RGB Slow Flash LED Indicators with 20cm cable
Frequently Asked Questions
What is the operating voltage of these LED indicators?
Are the LEDs pre-wired?
What is the flashing pattern?
How many indicators are included?
Can I use these with a 5V supply?
What is the diameter of the LED?
Overview
The Generic 3V 8mm Water Clear RGB Slow Flash LED Indicator is a pre-wired indicator light designed to provide a clear visual status signal in electronic circuits and mechanical equipment. Each indicator features an 8mm water clear lens that houses an RGB LED with a slow flash effect, cycling through colours automatically. The 20cm cable attached to each LED simplifies installation, allowing you to connect directly to your circuit without additional soldering to the LED itself. This pack includes five indicators, making it convenient for multi-point monitoring or for keeping spares on hand. Ideal for hobbyists, technicians, and designers, these indicators offer a straightforward way to add visual feedback to panels, prototypes, and small devices.
Key Features
- Slow flash RGB effect: The LED automatically cycles through red, green, and blue colours in a slow flashing pattern, drawing attention without an external controller.
- 3V operation: Suitable for low-voltage DC circuits, matching common battery and power supply voltages.
- 8mm water clear lens: Provides bright, even light output and a clean appearance when mounted.
- 20cm pre-wired cable: Saves time during installation; simply connect the wire ends to your power source.
- Pack of five: Allows you to equip multiple locations or keep spares for future projects.
- Lightweight and compact: Easy to fit into tight spaces and does not add significant weight to your build.
Specifications Explained
Voltage Rating (3V): This indicator is designed to operate at 3V DC. Ensure your power supply matches this rating to avoid damaging the LED. If your supply is higher, you will need to use a suitable resistor or regulator (not included).
LED Size (8mm): The 8mm diameter is a common size for panel indicators, fitting into standard 8mm mounting holes. The water clear lens ensures maximum light transmission and a wide viewing angle.
Cable Length (20cm): The pre-attached 20cm cable provides ample length for most internal wiring needs, reducing the need for extensions. The cable is already connected to the LED, so you only need to strip and connect the other end.
Slow Flash LED Indicator: The internal circuitry creates a slow, repeating colour cycle without any external control, making it a self-contained visual indicator.
Compatibility and Requirements
These indicators require a 3V DC power source. They are compatible with a wide range of low-voltage electronic projects, including breadboards, perfboards, and panel mounts. No additional components are included; you will need a suitable power supply and, if necessary, a resistor for higher voltages. The pre-wired cable ends are bare, ready for soldering or connection to terminal blocks.
Typical Uses
- Status indication on control panels and equipment
- Power-on indicators for electronic devices
- Hobby and DIY electronics projects
- Model making and RC vehicles
- Educational demonstrations of LED circuits
- Visual alerts in small machinery
What's in the Box
- 5 x 3V 8mm Water Clear RGB Slow Flash LED Indicators with 20cm cable
Quick specs
- Voltage Rating (V)
- 3
- Size (mm)
- 8
- Additional Specs.
- Cable
- Model No. / Name
- Slow Flash LED Indicator
- Cable Length
- 20 CM
- LED Size (mm)
- 8mm












