Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single 4.7uF 16V tantalum capacitor in a DIP through-hole package with 5% tolerance. Its compact body and stable value make it a practical pick for prototyping, repair and low-voltage filtering work.

Key Highlights

  • 4.7uF capacitance at 16V DC rating
  • 5% tolerance for predictable circuit values
  • DIP through-hole package for easy breadboarding
  • Compact body suits space-limited builds
  • Stated operating range of -5 to 51 degrees Celsius
  • Weighs about 1 gram with 1 x 1 x 1 cm shipping size

Ideal For

  • Hobbyists building breadboard prototypes
  • Repair technicians replacing through-hole capacitors
  • Electronics students learning component basics
  • Makers working on low-voltage DC circuits
  • Audio DIYers needing a stable coupling value

Buying Tip

Check the polarity markings and your circuit's DC voltage before soldering, and confirm you need a 4.7uF value rather than a nearby standard size, since this is sold as a single unit.

Elecvora expert review

Our verdict

A straightforward single tantalum capacitor that does one job well: putting a stable 4.7uF value into a through-hole build. It suits repair and prototyping rather than high-temperature or high-voltage work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy hand soldering thanks to the DIP through-hole format
  • Tight 5% tolerance for a predictable value
  • Compact body for tight layouts
  • Simple single-unit purchase for repairs

Cons

  • Polarised part requires correct orientation
  • Stated temperature range of -5 to 51 degrees Celsius limits harsh environments
  • Sold as one piece, so larger builds need multiple units

Best for

Through-hole prototyping, repair and low-voltage filtering

Not ideal for

High-temperature or high-voltage applications

Specifications

ManufacturerGeneric
Capacitance4.7uF
Voltage Rating (V)16
Case/PackageDIP
Tolerance (%)5
Mounting TypeThrough Hole
Operating Temperature (°C)-5 ~ 51
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 4.7uF 16V Tantalum Capacitor DIP

Frequently Asked Questions

Is this capacitor polarised?
Yes. Tantalum capacitors are polarised, so the leads must be fitted the correct way round. Check the marking on the body before soldering.
What voltage can I apply?
The rated voltage is 16V DC. In practice, keep your circuit voltage comfortably below that rating to avoid stressing the part.
Can I use it on a breadboard?
Yes. The DIP through-hole leads fit standard breadboard holes, which makes it convenient for quick prototypes.
How many capacitors do I get?
The package contains one 4.7uF 16V tantalum capacitor in a DIP case.
What temperature range does it support?
The stated operating range is -5 to 51 degrees Celsius, so it is best suited to moderate indoor conditions.
Does the 5% tolerance matter?
It means the actual capacitance stays close to 4.7uF, which is useful in audio and timing circuits where value consistency helps.

Overview

This Generic 4.7uF 16V tantalum capacitor is a through-hole component supplied in a DIP case. Tantalum parts are electrolytic capacitors that use a porous tantalum anode with an oxide dielectric layer, which allows a comparatively high capacitance in a small volume. For builders, that means a 4.7uF value in a body that fits neatly into crowded boards and small enclosures.

The part carries a 5% tolerance, so the delivered capacitance sits close to the marked value. It is a single unit, suited to one-off repairs, breadboard experiments and small production runs where you source parts per project.

Key Features

  • 4.7uF at 16V: a common mid-range value for coupling, bypass and smoothing duties in low-voltage DC circuits.
  • DIP through-hole mounting: leads are simple to insert into breadboards, perfboard and plated through-holes, and easy to solder by hand.
  • 5% tolerance: tighter than many general-purpose electrolytics, which helps when a circuit depends on a predictable value.
  • Compact footprint: the small body helps where board area is limited.
  • Stated temperature range of -5 to 51 degrees Celsius: intended for moderate, indoor operating conditions.

Specifications Explained

Capacitance and voltage. 4.7uF is the amount of charge the part stores per volt, and 16V is the maximum DC working voltage stated for this part. Keep applied voltage comfortably below that figure in your design so the capacitor is not stressed.

Tolerance. The 5% figure describes how far actual capacitance may drift from 4.7uF. In filter and coupling positions this is usually more than adequate, and it is helpful in timing or audio paths where value consistency matters.

Package and mounting. DIP means a dual in-line style body with through-hole leads. This is the friendlier option for hand assembly, rework and teaching, since no fine-pitch soldering is required.

Temperature. The stated operating range is -5 to 51 degrees Celsius, so plan builds that stay within ordinary room conditions.

Compatibility and Requirements

This is a passive two-terminal component, not a module, so compatibility depends on your circuit's voltage and capacitance needs. It requires a board or breadboard with through-hole positions and standard hand-soldering tools. No driver, firmware or external power source is involved.

Typical Uses

  • Bypass and decoupling on low-voltage DC rails
  • Signal coupling in audio and small-signal paths
  • Breadboard prototypes and student lab work
  • Repair and replacement in existing through-hole boards
  • General filtering in hobby electronics projects

What's in the Box

One 4.7uF 16V tantalum capacitor in a DIP package.

Quick specs

Manufacturer
Generic
Capacitance
4.7uF
Voltage Rating (V)
16
Case/Package
DIP
Tolerance (%)
5
Mounting Type
Through Hole
See all specifications