Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 433MHz 100mW telemetry kit adds a two-way serial link between your drone and ground station, compatible with Ardupilot and Pixhawk. It offers up to 1600m range and easy USB or DF13 connection.

Key Highlights

  • 433MHz frequency with 100mW adjustable output power
  • Up to 1600m range with -121dBm receive sensitivity
  • MAVLink protocol framing and status reporting
  • Interchangeable air and ground modules with USB and DF13
  • 3.3V UART interface, 3.6–7V input, 1.1A current draw
  • Lightweight at 36g and compact for easy mounting

Ideal For

  • Ardupilot and Pixhawk drone builders
  • FPV pilots needing real-time telemetry
  • DIY enthusiasts adding two-way serial link
  • Agricultural and mapping drone operators
  • Students and researchers using MAVLink

Buying Tip

Remember to order a 6-pos to 6-pos cable if you plan to connect to a Pixhawk, as the included cable may not be ideal.

Elecvora expert review

Our verdict

This telemetry kit offers a reliable, open-source solution for adding two-way communication to Ardupilot and Pixhawk systems. Its interchangeable modules and solid range make it a practical choice for enthusiasts.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Interchangeable air and ground modules simplify setup
  • MAVLink protocol support for easy integration
  • Adjustable output power and error correction
  • Lightweight and compact design

Cons

  • Casing variant and cable colour are shipped randomly
  • Requires separate 6-pos cable for optimal Pixhawk connection

Best for

Drone builders using Ardupilot or Pixhawk who need dependable telemetry

Not ideal for

Those requiring plug-and-play with non-Ardupilot systems

Specifications

Item TypeKit
Frequency (GHz)0.43
Rated Power (mW)100
Range1600 m
Receive sensitivity-121 dBm
InterfaceSerial, 3.3V UART
Air Data Rate250kbps
Operating Current (A)1.1
Voltage(V)3.6 to 7
Operating Temperature (°C)-10 to 85
Weight (g)36
Shipping Weight0.039 kg
Shipping Dimensions10 × 7 × 5 cm

What's in the box

  • 1 x 3DR Radio Telemetry with case (Tx and Rx modules)

Frequently Asked Questions

What flight controllers is this telemetry kit compatible with?
It is compatible with Ardupilot and Pixhawk-based systems.
What is the maximum range?
The kit offers a range of up to 1600 metres in ideal conditions.
What voltage does it require?
It operates from 3.6 to 7V and draws 1.1A.
Does it come with a case?
The product is available in variants with and without casing, and you will receive one randomly.
Can I use it with a Pixhawk without extra cables?
The included cable works, but a 6-pos to 6-pos cable is recommended for easier connection.
What is the air data rate?
The air data rate is 250kbps.

Overview

The 433MHz 100mW Radio Telemetry Kit is a compact, lightweight solution for adding a two-way telemetry connection between your drone and ground station. Based on the HopeRF HM-TRP radio module, it supports MAVLink protocol framing and frequency hopping spread spectrum (FHSS) for reliable data transmission. The kit includes interchangeable air and ground modules, each featuring a micro-USB port and a 6-position DF13 connector, so you can easily connect to a computer or flight controller.

Key Features

  • Transparent serial link with MAVLink framing and status reporting
  • Frequency Hopping Spread Spectrum (FHSS) for robust communication
  • Adaptive Time Division Multiplexing (TDM) for efficient bandwidth use
  • Built-in error correction can correct up to 25% of bit errors
  • Configurable duty cycle and adjustable output power up to 100mW
  • RP-SMA connector for external antennas
  • Wide voltage range of 3.6 to 7V and operating temperature of -10 to 85°C

Specifications Explained

The 433MHz frequency band offers good propagation characteristics for long-range telemetry. With a maximum output power of 100mW (adjustable), the kit achieves a range of up to 1600 metres in ideal conditions. The receive sensitivity of -121dBm ensures weak signals are still picked up, while the air data rate of 250kbps provides a balance between range and data throughput. The 3.3V UART interface is standard for flight controllers, and the 1.1A current draw is typical for this class of radio. The compact 36g weight makes it easy to mount on small airframes.

Compatibility and Requirements

This telemetry kit is compatible with Ardupilot and Pixhawk-based systems. It requires a 3.3V UART connection and can be configured through Mission Planner or APM Planner. Note that to connect to a Pixhawk, a 6-pos to 6-pos cable (not included) is recommended for easier setup. The kit is available in variants with or without casing, shipped randomly, and cable colours may vary.

Typical Uses

Ideal for FPV pilots and drone enthusiasts who need real-time telemetry data such as GPS position, battery status, and flight mode. Use it for waypoint navigation, in-flight parameter tuning, or simply monitoring your aircraft's health during autonomous missions.

What's in the Box

Package includes one 3DR Radio Telemetry set with case, containing both transmitter and receiver modules.

Quick specs

Item Type
Kit
Frequency (GHz)
0.43
Rated Power (mW)
100
Range
1600 m
Receive sensitivity
-121 dBm
Interface
Serial, 3.3V UART
See all specifications