Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 4700uF 10V aluminum electrolytic capacitor is a through-hole radial component for power supply smoothing and filtering. Its high capacitance and compact 20mm body make it a practical choice for DC filtering and decoupling tasks.

Key Highlights

  • 4700uF capacitance for substantial energy storage and smoothing
  • 10V DC voltage rating suits low-voltage power rails
  • Through-hole radial mounting for secure PCB installation
  • Wide -40°C to 80°C operating temperature range
  • Compact 20mm length and 12mm width, about 4g each
  • ±20% tolerance typical for general-purpose electrolytic use

Ideal For

  • Electronics hobbyists building power supply projects
  • Repair technicians replacing failed electrolytic capacitors
  • Students learning about filtering and decoupling
  • Makers stocking common through-hole components
  • DIY audio and gadget builders needing bulk capacitance

Buying Tip

Check the polarity markings and confirm your circuit's DC voltage stays comfortably below 10V before soldering this capacitor into place.

Elecvora expert review

Our verdict

A straightforward 4700uF 10V radial electrolytic capacitor that does its job in low-voltage filtering and smoothing. It is a practical choice for repairs and hobby projects where a through-hole part is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High capacitance in a compact 20mm body
  • Standard through-hole mounting for easy soldering
  • Wide operating temperature range
  • Lightweight at about 4g per unit

Cons

  • Polarized, so reverse connection can damage it
  • 10V rating limits use to low-voltage circuits
  • No datasheet or detailed ripple current rating provided

Best for

Low-voltage power supply filtering and general electronics projects

Not ideal for

High-voltage or high-ripple applications beyond its 10V rating

Specifications

ManufacturerGeneric
Capacitance4700uF
Voltage Rating (V)10
Tolerance (%)20
Operating Temperature (°C)-40 ~ 80
Mounting TypeThrough Hole
Length (mm)20
Width (mm)12
Weight (g)4 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 4700uF 10V Electrolytic Capacitor

Frequently Asked Questions

Can I use this capacitor on a 12V supply?
No, the voltage rating is 10V. Operating it above 10V DC risks failure. Use a capacitor with a higher voltage rating for 12V circuits.
Is this capacitor polarized?
Yes, aluminum electrolytic capacitors are polarized. The negative lead is typically marked with a stripe, and it must be connected correctly.
What is the tolerance of this capacitor?
The capacitance tolerance is ±20%, which is standard for general-purpose electrolytic capacitors.
How many capacitors are included?
The package includes one 4700uF 10V electrolytic capacitor.
What are the dimensions and weight?
Each capacitor measures 20mm in length and 12mm in width, and weighs approximately 4 grams.
What is the operating temperature range?
It operates from -40°C to 80°C. Keep it within this range for reliable performance.

Overview

This Generic 4700uF 10V aluminum electrolytic capacitor is a polarized, through-hole radial component intended for smoothing and buffering rectified DC voltages in electronic circuits. It uses an aluminum oxide dielectric and a liquid electrolyte, a construction common in power supplies, DC-DC converters, and general-purpose filtering. The 4700uF capacitance provides a large reservoir for reducing ripple, while the 10V rating keeps it appropriate for low-voltage rails. With a 20mm length, 12mm width, and roughly 4 grams per unit, it fits typical prototyping and repair work.

Key Features

  • 4700uF capacitance: stores significant charge for smoothing and buffering.
  • 10V DC rating: suited to low-voltage power circuits.
  • Through-hole mounting: leads pass through PCB holes for soldered joints.
  • Radial lead layout: both leads exit the same end for upright board placement.
  • Temperature range: operates from -40°C to 80°C.
  • ±20% tolerance: standard variation for electrolytic capacitors.

Specifications Explained

Capacitance (4700uF): This is a high value for a compact radial capacitor. In power supply filtering, higher capacitance helps hold voltage steadier under load and reduces ripple. Voltage rating (10V): This is the maximum DC voltage the capacitor should see continuously. Always leave headroom; for a 5V or 9V rail, a 10V part is reasonable, but avoid operating at or above the rating. Tolerance (±20%): Actual capacitance may differ from the nominal value by up to 20%, which is normal and acceptable for filtering and decoupling. Operating temperature (-40°C to 80°C): The capacitor is intended for use within this range; exceeding it can shorten life. Polarity: As an electrolytic type, it must be installed with correct polarity. Reverse connection can damage the component and pose a safety risk.

Compatibility and Requirements

This capacitor is a through-hole component, so it requires a PCB or perfboard with holes spaced to match its radial lead pitch. Soldering equipment is needed for installation. Because it is polarized, the circuit layout must accommodate the positive and negative leads correctly. No other accessories are included or required beyond standard soldering tools and the host circuit.

Typical Uses

Common applications include input and output decoupling in power supplies, smoothing rectified DC in DIY projects, buffering in DC-DC converters, and general filtering in hobby electronics. It can also serve as a replacement part in repair work where a 4700uF 10V radial capacitor is specified.

What's in the Box

Package includes: 1 x 4700uF 10V Electrolytic Capacitor.

Quick specs

Manufacturer
Generic
Capacitance
4700uF
Voltage Rating (V)
10
Tolerance (%)
20
Operating Temperature (°C)
-40 ~ 80
Mounting Type
Through Hole
See all specifications