
1 / 3 · Click to enlarge
AI Summary
A 470uF 100V radial electrolytic capacitor for power supply filtering and decoupling. It offers through-hole mounting, ±20% tolerance, and a -40 to 80°C operating range in a compact 25mm body.
Key Highlights
- 470uF capacitance with 100V DC voltage rating
- Radial through-hole mounting for PCB assembly
- ±20% capacitance tolerance suits general filtering
- Operates from -40°C to 80°C
- Compact 25mm length and 16mm width
- Lightweight at approximately 4g per unit
Ideal For
- Electronics repair technicians replacing failed capacitors
- Hobbyists building power supply or filter circuits
- Students learning about polarized electrolytic components
- Makers prototyping DC-DC converter stages
- Industrial maintenance teams servicing power supplies
Buying Tip
Check the available board space and hole spacing before ordering; this capacitor is 25mm long and 16mm wide, so confirm it fits your layout.
Elecvora expert review
Our verdict
A straightforward 470uF 100V radial electrolytic capacitor that covers common filtering and decoupling needs. It is a practical single-unit option for repair and prototyping, provided you respect polarity and voltage limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Useful 470uF value at a 100V rating
- Standard through-hole mounting for easy installation
- Wide -40°C to 80°C operating range
- Compact 25mm body saves board space
- Lightweight and easy to handle
Cons
- Polarized design requires careful orientation
- Capacitance tolerance of ±20% may not suit precision timing
- Single unit only, no mounting hardware included
Best for
General electronics repair and power supply filtering projects
Not ideal for
High-temperature or precision analog applications
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 470uF |
| Voltage Rating (V) | 100 |
| Operating Voltage (VDC) | 100 |
| Tolerance (%) | 20 |
| Operating Temperature (°C) | -40 ~ 80 |
| Mounting Type | Through Hole |
| Length (mm) | 25 |
| Width (mm) | 16 |
| Weight (g) | 4 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 470uF 100V Electrolytic Capacitor
Frequently Asked Questions
Is this capacitor polarized?
What is the maximum voltage this capacitor can handle?
Can I use this capacitor in an AC circuit?
What are the dimensions and weight?
How many capacitors are included?
What is the operating temperature range?
Overview
The 470uF 100V Electrolytic Capacitor is a radial through-hole component built for energy storage and voltage smoothing in electronic circuits. It uses an aluminium electrolytic construction with a polarized design, meaning it must be installed with the correct polarity to function safely. This single capacitor is suited to repair, prototyping, and general electronics work where a 470uF value at 100V is required.
Key Features
- 470uF capacitance: Provides a moderate energy buffer for filtering and decoupling tasks.
- 100V DC rating: Supports circuits operating at voltages up to the rated limit.
- Radial through-hole mount: Fits standard PCB holes for hand or wave soldering.
- ±20% tolerance: Typical for electrolytic capacitors, giving predictable performance in non-critical filtering.
- Wide temperature range: Stable operation from -40°C to 80°C.
- Compact size: 25mm length and 16mm width allow dense board layouts.
Specifications Explained
Capacitance (470uF): This value determines how much charge the capacitor can store. In power supplies, it helps smooth rectified DC by absorbing ripple and releasing energy during demand peaks. Voltage rating (100V): The maximum DC voltage the capacitor should see in normal operation. Always leave headroom below this rating for reliability. Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal value, which is acceptable for most filtering and decoupling roles. Operating temperature (-40°C to 80°C): Defines the safe ambient range. Avoid placing the capacitor near heat sources that could push it beyond 80°C. Dimensions and weight: At 25mm long, 16mm wide, and about 4g, it is easy to handle and mount on standard prototyping boards.
Compatibility and Requirements
This is a polarized electrolytic capacitor. It requires a DC circuit with correct polarity observation: the negative stripe on the sleeve marks the negative terminal. It is a through-hole part, so the PCB must have suitable hole spacing and solder pads. No other accessories are required for basic use. Ensure the circuit voltage does not exceed 100V DC and the ambient temperature stays within -40°C to 80°C.
Typical Uses
- Input and output filtering in linear and switching power supplies
- Decoupling and smoothing in DC-DC converter stages
- Buffering rectified DC in small electronic devices
- General-purpose energy storage in hobby and repair projects
- Industrial power supply sections where a 100V rating is needed
What's in the Box
1 x 470uF 100V Electrolytic Capacitor.

Quick specs
- Manufacturer
- Generic
- Capacitance
- 470uF
- Voltage Rating (V)
- 100
- Operating Voltage (VDC)
- 100
- Tolerance (%)
- 20
- Operating Temperature (°C)
- -40 ~ 80











