
1 / 3 · Click to enlarge
AI Summary
This 470uF 25V electrolytic capacitor is a radial through-hole component for power supply filtering and smoothing. Its compact size and wide temperature range make it a reliable choice for repair and DIY electronics projects.
Key Highlights
- 470uF capacitance with ±20% tolerance for stable filtering
- 25V DC voltage rating for low to medium power circuits
- Radial through-hole mounting for easy PCB installation
- Operates from -40°C to 80°C in demanding environments
- Compact 12mm length and 8mm width save board space
- Lightweight at 4g each, ideal for portable devices
Ideal For
- Electronics hobbyists building power supply circuits
- Technicians repairing consumer devices
- DIY enthusiasts working on DC-DC converters
- Students learning about capacitor applications
- Makers prototyping PCB designs
Buying Tip
Check the polarity markings on the capacitor body and your PCB before soldering; the negative stripe indicates the cathode.
Elecvora expert review
Our verdict
A straightforward, reliable electrolytic capacitor for general-purpose filtering and repair. It offers standard specifications at a low cost, making it a practical choice for stocking your parts bin.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 470uF 25V rating covers many common circuits
- Through-hole mounting is easy to work with
- Wide temperature range suits varied environments
- Compact size fits tight spaces
- Low weight for portable applications
Cons
- Polarized design requires careful orientation
- Not suitable for high-frequency applications
- Limited to 25V maximum
Best for
General electronics repair and DIY power supply projects
Not ideal for
High-voltage or high-frequency precision circuits
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 470uF |
| Tolerance (%) | 20 |
| Operating Temperature (°C) | -40 ~ 80 |
| Mounting Type | Through Hole |
| Length (mm) | 12 |
| Width (mm) | 8 |
| Weight (g) | 4 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 470uF 25V Electrolytic Capacitor
Frequently Asked Questions
What is the polarity of this capacitor?
Can I use this capacitor in an AC circuit?
What is the maximum voltage this capacitor can handle?
Is this capacitor suitable for high-temperature environments?
How many capacitors are included?
Do I need any special tools to install it?
Overview
The Generic 470uF 25V Electrolytic Capacitor is a polarized aluminium electrolytic capacitor built for through-hole mounting. It provides reliable capacitance for smoothing rectified DC voltages, buffering power rails, and decoupling noise in electronic circuits. With a capacitance of 470 microfarads and a voltage rating of 25V, it is well-suited to a broad range of power supply and converter applications. The capacitor operates across a temperature range of -40°C to 80°C, making it dependable in both indoor and protected outdoor environments.
Key Features
- 470uF capacitance with ±20% tolerance for consistent energy storage and filtering.
- 25V DC rating suitable for low to medium voltage power rails.
- Radial through-hole design for secure mounting on printed circuit boards.
- Wide operating temperature range from -40°C to 80°C.
- Compact dimensions of 12mm length and 8mm width to fit tight layouts.
- Lightweight at approximately 4 grams per unit.
Specifications Explained
Capacitance (470uF): This value determines how much charge the capacitor can store. 470uF is a common choice for smoothing power supply outputs and filtering low-frequency noise. Tolerance (±20%): The actual capacitance may vary by up to 20%, which is typical for electrolytic capacitors and acceptable for most filtering tasks. Voltage rating (25V): Do not exceed 25V DC across the capacitor. Operating temperature (-40°C to 80°C): The capacitor performs reliably in cold and moderately hot conditions. Mounting type (through-hole): Leads pass through holes in the PCB for soldering, providing a strong mechanical bond.
Compatibility and Requirements
This capacitor requires a DC voltage with correct polarity; reverse polarity can damage it. It is intended for through-hole PCB mounting, so you will need a soldering iron and basic tools. Ensure your circuit's voltage does not exceed 25V DC. No additional accessories are required.
Typical Uses
Common applications include input and output decoupling in power supplies, smoothing rectified DC in DC-DC converters, buffering energy in motor drivers, and general-purpose filtering in audio and digital circuits. It is also useful for repairing consumer electronics where a 470uF 25V capacitor is specified.
What's in the Box
Package includes: 1 x 470uF 25V Electrolytic Capacitor.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 470uF
- Tolerance (%)
- 20
- Operating Temperature (°C)
- -40 ~ 80
- Mounting Type
- Through Hole
- Length (mm)
- 12










