
1 / 3 · Click to enlarge
AI Summary
A radial through-hole polyester film capacitor rated 47nF at 630V with 5% tolerance. Its compact 17 x 12 mm body fits neatly into general-purpose DC filtering, coupling and timing circuits.
Key Highlights
- 47nF (0.047uF) capacitance with 473J marking
- 630V DC voltage rating for general-purpose circuits
- 5% tolerance for predictable, repeatable values
- Polyester PET film dielectric in a radial case
- Through-hole mounting with a compact 17 x 12 mm body
- Lightweight at about 3 g per capacitor
Ideal For
- Hobbyists building and repairing through-hole circuits
- Repair technicians replacing general-purpose film capacitors
- Design engineers prototyping DC filters and coupling stages
- Students learning passive component selection
- Makers stocking common radial capacitor values
Buying Tip
Check the lead spacing and the 17 x 12 mm body size against your board layout before ordering, since radial film capacitors vary in footprint.
Elecvora expert review
Our verdict
A straightforward radial film capacitor that covers a common value and a healthy voltage rating for general-purpose work. It is a sensible spare to keep in a parts drawer for repairs and prototyping.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Useful 47nF value with 5% tolerance
- 630V rating gives design headroom
- Compact radial body for through-hole boards
- Lightweight and easy to store
Cons
- Through-hole only, not surface mount
- No detailed datasheet or temperature curve supplied
- Single unit, so larger builds need multiple orders
Best for
General-purpose DC filtering, coupling and repair work
Not ideal for
Surface-mount assemblies or high-frequency RF design
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 47nF |
| Voltage Rating (V) | 630 |
| Tolerance (%) | 5 |
| Mounting Type | Through Hole |
| Length (mm) | 17 |
| Width (mm) | 12 |
| Case/Package | Redial |
| Weight (g) | 3 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 47nF (0.047uF - 473J) 630V Polyester Film Capacitor
Frequently Asked Questions
What does 473J mean on this capacitor?
Is this capacitor polarised?
What is the 630V rating for?
Can I use it on a breadboard?
How many capacitors are included?
How should I store it?
Overview
This radial polyester film capacitor delivers 47nF (0.047uF) of capacitance with a 630V voltage rating and a 5% tolerance. The 473J marking on the body confirms the value and tolerance, so you can identify it quickly during assembly or repair. Polyester (PET) film is a widely used dielectric for general-purpose capacitors, and this part is built for through-hole mounting on printed circuit boards and prototype boards.
Key Features
- 473J value code: 47nF capacitance with 5% tolerance.
- 630V rating: suitable for circuits that need more headroom than low-voltage parts provide.
- Polyester film dielectric: a stable, low-cost choice for everyday DC work.
- Radial through-hole case: two leads spaced for standard PCB holes.
- Compact footprint: roughly 17 mm long and 12 mm wide, about 3 g each.
Specifications Explained
Capacitance and tolerance
47nF, or 0.047uF, is a mid-range value useful for coupling, filtering and timing. The 5% tolerance means the actual value stays close to the marked figure, which matters when several parts work together in a filter or oscillator.
Voltage rating
The 630V rating describes the maximum working voltage the capacitor is intended for. Always leave margin below that figure in your design rather than running at the limit.
Package and mounting
The radial case has two leads for through-hole soldering. At about 17 x 12 mm, it fits standard prototyping and repair work without needing surface-mount tools.
Compatibility and Requirements
This is a passive through-hole component. It needs a board or breadboard with matching lead spacing and a soldering iron for permanent installation. No driver, firmware or additional module is required.
Typical Uses
- DC filtering and supply decoupling
- Signal coupling between stages
- Timing and oscillator networks
- Snubber and transient suppression in low-to-medium voltage circuits
- General repair and hobby prototyping
What's in the Box
One 47nF (0.047uF, 473J) 630V polyester film capacitor.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 47nF
- Voltage Rating (V)
- 630
- Tolerance (%)
- 5
- Mounting Type
- Through Hole
- Length (mm)
- 17











