
1 / 3 · Click to enlarge
AI Summary
A pack of five 3mm green LED indicator lights rated 48-72V, each supplied with a 20cm cable. They add compact, low-power status signalling to circuits, panels, and DIY electronics builds.
Key Highlights
- Pack of five 3mm green LED indicators
- Rated for 48 to 72V operation
- 20cm cable attached to each light
- Compact 3mm LED suits tight layouts
- Low shipping weight for easy handling
- Simple to install in electronics projects
Ideal For
- Electronics hobbyists building status panels
- Technicians monitoring equipment operation
- DIY makers adding power-on indicators
- Control panel builders working with 48-72V circuits
- Students learning practical LED wiring
Buying Tip
Check that your circuit voltage falls between 48V and 72V before wiring these indicators in, since they are rated for that range only.
Elecvora expert review
Our verdict
A straightforward, low-cost set of green indicators that suits anyone needing simple status lights on 48-72V equipment. The pre-fitted 20cm cables and tiny 3mm bodies make installation easy in tight spaces.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Five units per pack for multiple install points
- Pre-attached 20cm cables save wiring time
- Compact 3mm size fits crowded panels
- Efficient LED light generation
- Very light, so it will not strain small assemblies
Cons
- No connectors or mounting hardware included
- Only suitable for 48-72V circuits, not lower voltages
- Bare cable ends require your own soldering or termination
Best for
Builders adding green status indicators to 48-72V circuits and panels
Not ideal for
Low-voltage projects such as 5V or 12V logic circuits
Specifications
| Color | Green |
|---|---|
| Voltage Rating (V) | 48 to 72 |
| Size (mm) | 3 |
| Additional Specs. | Cable |
| Model No. / Name | Led Indicator |
| Cable Length | 20 CM |
| LED Size (mm) | 3 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 5 x Green 3mm LED Indicator Lights with 20cm Cable
Frequently Asked Questions
What voltage do these indicators need?
How many indicators come in the pack?
Are the cables already attached?
Can I use them on a 12V supply?
Do they include mounting hardware?
How should I care for them?
Overview
These 3mm green LED indicator lights are designed to show the operating status of circuits and mechanical equipment at a glance. Each unit in this five-piece pack is rated for 48 to 72V and arrives with a 20cm cable attached, so you can position the light where it is visible and route the lead back to your connection point.
Because they are LEDs, these indicators convert electrical energy directly into light rather than first producing heat. That makes them an efficient choice for continuous status signalling in panels, signs, and small devices.
Key Features
- Five indicators per pack for multiple points in one build
- Green light output for clear normal-operation signalling
- 48 to 72V rating to match higher-voltage circuits
- 3mm LED body for space-restricted mounting
- 20cm cable already fitted for easier routing
- Lightweight design that adds almost nothing to your assembly
Specifications Explained
Voltage rating (48 to 72V): this is the operating range the indicator is intended for. Confirm your supply falls within it before connecting.
3mm LED size: the small lens diameter makes these suitable for crowded control panels and compact housings where larger lamps will not fit.
20cm cable: the pre-attached lead gives you a short, tidy run from the indicator to your terminal or board.
Green colour: a conventional choice for indicating power on or normal running status.
Compatibility and Requirements
Use these indicators only on circuits whose voltage sits within the stated 48 to 72V range. They are supplied as bare LED indicators with cable leads, so you will need to make your own electrical connections. No connector type, mounting bezel, or driver is included beyond the indicator and its cable.
Typical Uses
- Status and power-on indication on control panels
- Monitoring the running state of mechanical equipment
- Electronic signs and display accents
- DIY electronics and hobby projects
- Small device indicators where space is tight
What's in the Box
Five green 3mm LED indicator lights, each with a 20cm cable attached.
Quick specs
- Color
- Green
- Voltage Rating (V)
- 48 to 72
- Size (mm)
- 3
- Additional Specs.
- Cable
- Model No. / Name
- Led Indicator
- Cable Length
- 20 CM













