Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A five-pack of 3mm water clear RGB LED indicators rated for 48-72V, each with a 20cm pre-wired cable. The quick flash RGB output makes them a practical choice for clear status and alarm signalling on panels and equipment.

Key Highlights

  • Pack of five 3mm RGB LED indicators
  • Rated for 48-72V operation
  • Water clear lens for bright output
  • 20cm pre-attached cable on each unit
  • Quick flash RGB signalling behaviour
  • Compact size for dense panel layouts

Ideal For

  • Control panel builders needing compact status lights
  • Maintenance technicians replacing panel indicators
  • DIY electronics hobbyists working with 48-72V circuits
  • Equipment manufacturers adding alarm signalling
  • Makers building multi-point status displays

Buying Tip

Confirm your circuit voltage sits within the 48-72V range before ordering, since these indicators are rated specifically for that window.

Elecvora expert review

Our verdict

A practical five-pack of compact RGB indicators for 48-72V equipment, with pre-wired leads that save assembly time. The quick flash output is useful where a simple on/off lamp would not stand out.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Five units per pack for spares or multi-point panels
  • Pre-attached 20cm cable simplifies wiring
  • Compact 3mm size fits tight layouts
  • RGB quick flash gives a clear attention signal

Cons

  • Limited to 48-72V supplies only
  • No mounting hardware or connector included
  • Cable length may be short for deep enclosures

Best for

Panel builders and technicians needing compact 48-72V status indicators

Not ideal for

Low-voltage projects such as 3.3V or 5V logic circuits

Specifications

Voltage Rating (V)48 to 72
Size (mm)3
Additional Specs.Cable
Model No. / NameLed Indicator
Cable Length20 CM
LED Size (mm)3
Quantity5 Pcs.
ColorRGB
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 5 x RGB LED indicators with 20cm cable

Frequently Asked Questions

What voltage do these LED indicators require?
They are rated for a supply between 48V and 72V. Do not connect them to voltages outside this range.
How long is the cable on each indicator?
Each indicator comes with a 20cm cable already attached.
What does quick flash RGB mean?
The indicator produces red, green, and blue light in a quick flashing pattern, giving a multi-colour attention signal.
How many indicators are included?
The pack contains five RGB LED indicators.
Can I use these on a 12V or 24V system?
No. The rated range is 48-72V, so a 12V or 24V supply is below the specified operating voltage.
How should I care for the indicators?
Keep the lens clean and dry, and avoid exceeding the rated voltage. Check the cable and connections periodically for wear.

Overview

These 3mm water clear RGB LED indicators are built for equipment status and alarm signalling where a 48-72V supply is available. Each unit in this five-pack comes with a 20cm cable already attached, so you can route connections without extra soldering to the LED legs. The quick flash RGB output draws attention to power-on, fault, or operating states, making it easier to monitor circuits and mechanical equipment at a glance.

LEDs convert electrical energy directly into light rather than first producing heat like conventional bulbs, so they generate efficient light with little wasted electricity. The water clear lens keeps the indicator looking clean when off and bright when active. With a 3mm diameter, these indicators fit neatly into compact panel layouts and small enclosures.

Key Features

  • Five matching indicators: a pack of five gives you spares or enough units for a multi-point panel.
  • 48-72V rating: suited to circuits and equipment operating in this voltage range.
  • RGB quick flash: a colour-changing flashing signal that stands out for status and alarm use.
  • 20cm cable: pre-wired leads simplify installation and reduce assembly time.
  • 3mm water clear lens: compact footprint with a clear appearance.

Specifications Explained

Voltage rating (48-72V): this is the supply range the indicator is intended to work with. Check that your circuit or equipment voltage falls within this window before connecting.

3mm LED size: the small diameter suits tight panel spaces and small device enclosures. It is a common size for indicator positions where space is limited.

20cm cable length: the attached leads give enough length for most panel-to-terminal runs, though very deep enclosures may need extension wiring.

RGB colour: the indicator produces red, green, and blue output in a quick flash pattern, giving a multi-colour visual signal rather than a single fixed colour.

Water clear lens: the clear lens keeps the indicator unobtrusive when inactive and allows the emitted colour to show clearly when lit.

Compatibility and Requirements

Use these indicators only with a supply within the stated 48-72V range. The 20cm cable is pre-attached, so you will need a suitable way to join or terminate the lead ends in your circuit. No additional resistor or driver is specified in the product data, so confirm your circuit design matches the indicator's rating before use.

Typical Uses

  • Panel status and power-on indication on equipment
  • Alarm and fault signalling in control cabinets
  • DIY electronics projects needing a compact flashing indicator
  • Replacement indicators on existing machinery
  • Multi-point status panels using the five-piece pack

What's in the Box

Five RGB LED indicators, each with a 20cm cable attached.

Quick specs

Voltage Rating (V)
48 to 72
Size (mm)
3
Additional Specs.
Cable
Model No. / Name
Led Indicator
Cable Length
20 CM
LED Size (mm)
3
See all specifications