
1 / 3 · Click to enlarge
AI Summary
A pack of five 5mm RGB slow flash LED indicators rated 48-72V with 20cm cables. The water-clear lens and automatic color-changing flash make status monitoring easy to see at a glance.
Key Highlights
- 5mm RGB LED with slow flash color-changing effect
- Rated for 48 to 72V operation
- 20cm cable pre-attached for easy wiring
- Water-clear lens for bright, visible light
- Pack of five indicators for multiple projects
- Compact and lightweight for tight spaces
Ideal For
- Electronics hobbyists building custom control panels
- Technicians maintaining industrial equipment
- DIY enthusiasts adding status lights to projects
- Model makers needing compact flashing indicators
- Panel builders looking for multi-pack value
Buying Tip
Confirm your circuit voltage stays within 48-72V before connecting, as these indicators do not include a current-limiting resistor.
Elecvora expert review
Our verdict
A practical five-pack of RGB slow flash indicators for higher-voltage panels, offering easy wiring and clear visibility. The 48-72V range limits use to specific circuits, but for those applications they are a straightforward solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-attached 20cm cable saves wiring time
- Slow flash RGB pattern stands out from steady lights
- Five-pack provides good value for multiple installations
- Compact 5mm size fits standard panel holes
Cons
- Requires a 48-72V DC source; not suitable for 12V or 24V systems
- No mounting hardware or bezel included
- Polarity must be observed for proper operation
Best for
Panel builders and technicians working with 48-72V DC systems
Not ideal for
Low-voltage hobby projects using 3V, 5V, or 12V supplies
Specifications
| Voltage Rating (V) | 48 to 72 |
|---|---|
| Size (mm) | 5 |
| Model No. / Name | Slow Flash LED Indicator |
| Cable Length | 20 CM |
| LED Size (mm) | 5 |
| Color | RGB |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 5 x RGB Slow Flash LED Indicator with 20cm cable
Frequently Asked Questions
What voltage do these indicators require?
Do these LEDs need a resistor?
What is the flash pattern?
How many indicators are included?
Can I use these in a 12V system?
Are mounting screws included?
Overview
This pack of five 5mm RGB slow flash LED indicators gives you a simple way to add a visible status signal to panels, equipment, and DIY electronics. Each indicator is rated for 48 to 72V and comes with a 20cm cable, so you can route it to your power source without extra wiring. The water-clear lens helps the RGB colors show clearly, and the slow flash pattern cycles through colors automatically to catch the eye without being harsh.
Key Features
- RGB slow flash: The LED cycles through colors with a slow flash effect, making it easy to distinguish from steady indicators.
- 5mm size: Fits standard 5mm panel holes and small enclosures.
- 48-72V rating: Suitable for higher-voltage DC circuits commonly found in industrial and equipment applications.
- 20cm cable: Pre-attached leads simplify installation and reduce assembly time.
- Water-clear lens: Provides bright, unobstructed light output for clear visibility.
- Five-pack: Enough indicators for multiple panels or as spares.
Specifications Explained
Voltage rating (48-72V): This indicator is designed to operate within a 48 to 72V range. Check that your circuit voltage falls within this window before connecting. LED size (5mm): The 5mm diameter is a common standard, so the indicator fits many panel mounts and bezels. Cable length (20cm): The attached cable gives you about 20cm of reach, which is useful for connecting to terminals or power rails inside an enclosure. Slow flash LED: The built-in flashing circuit creates a repeating color-changing pattern without needing an external controller.
Compatibility and Requirements
These indicators require a DC power source within the 48 to 72V range. They do not include a separate driver or resistor, so the applied voltage must match the rating. The 20cm cable can be soldered or connected to your circuit using appropriate connectors. No mounting hardware is included, so you may need a panel bezel or holder if your installation requires one.
Typical Uses
- Status indication on control panels and switchboards
- DIY electronics projects and test equipment
- Equipment monitoring where a flashing alert is useful
- Model making and prop lighting
- Automotive or marine custom dash indicators (verify voltage)
What's in the Box
Five RGB slow flash LED indicators, each with a 20cm cable.
Quick specs
- Voltage Rating (V)
- 48 to 72
- Size (mm)
- 5
- Model No. / Name
- Slow Flash LED Indicator
- Cable Length
- 20 CM
- LED Size (mm)
- 5
- Color
- RGB












