
1 / 4 · Click to enlarge
AI Summary
A plug-and-play set of four 720 brushed motors (two CW, two CCW) plus two 55mm propellers for small indoor racing drones. The matched pairs and pre-attached 6mm cables make micro quad builds and repairs simple.
Key Highlights
- Four 720 brushed motors in two CW and two CCW units
- 55mm plastic blade propellers sized for micro drone frames
- 3.7V operation at roughly 0.1A current draw
- 1mm shaft diameter matched to the included propellers
- High-speed 50000 and 48000 RPM ratings for indoor flight
- Pre-attached 6mm cables for plug-and-play wiring
Ideal For
- Hobbyists building a first 100mm-class indoor racing drone
- Indoor FPV racers maintaining micro quadcopters
- Makers experimenting with brushed motor multirotor designs
- Repairers replacing worn motors or propellers on small drones
Buying Tip
Check that your frame takes 7mm-diameter motors with a 1mm shaft and that your flight controller supports brushed motor outputs before buying.
Elecvora expert review
Our verdict
A sensible low-cost starter set for micro drone builds, with matched CW and CCW motors removing the guesswork from wiring. It is best treated as a learning and repair kit rather than a high-performance power system.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Matched CW and CCW motor pairs included
- Propellers sized to the motor shaft
- Lightweight 7mm motor body
- Pre-attached 6mm cables simplify wiring
Cons
- Low torque limits propeller size and load
- Battery and flight controller not included
- Only two propellers supplied for four motors
Best for
Beginners and hobbyists building or repairing 100mm-class indoor drones
Not ideal for
Pilots needing high-thrust motors for larger or heavier multirotors
Specifications
| Motor Type | Brushed motor |
|---|---|
| Rated Speed (RPM) | 50000, 48000 |
| Rated Voltage (VDC) | 3.7 |
| Operating Current (A) | 0.1 |
| Operating Temperature (°C) | -10 to 50 |
| Shaft Diameter | 1 mm |
| Color | Silver |
| Motor diameter (mm) | 7 |
| Motor Length (mm) | 20 |
| Motor Material | Metal |
| Prop. Length(mm) | 55 |
| Prop. Material | Plastic |
| Cable Length | 6 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 15 × 10 × 6 cm |
What's in the box
- 2 x 720 brushed motor, CW rotation
- 2 x 720 brushed motor, CCW rotation
- 2 x 55mm blade propellers (red and black)
Frequently Asked Questions
What voltage do these 720 motors need?
How do I tell the CW and CCW motors apart?
What size propellers fit these motors?
Is a battery included?
Can I use these motors on a larger drone?
How should I care for the motors and propellers?
Overview
This set brings together the core parts needed to power a small indoor racing drone: four 720 brushed motors and two 55mm blade propellers. The motors are split into two clockwise and two counter-clockwise units, which is the arrangement a quadcopter needs for balanced thrust and yaw control. Each motor measures 7mm in diameter and 20mm in length, with a 1mm shaft that fits the supplied propellers.
The motors run on 3.7V and draw around 0.1A, making them a practical match for lightweight micro builds. The 55mm plastic propellers are shaped to keep wind resistance low so they can spin up quickly, and the 6mm cables are already attached for straightforward connection to an ESC or flight controller.
Key Features
- Two CW and two CCW 720 brushed motors in one pack
- Rated speeds of 50000 and 48000 RPM
- 3.7V rated voltage with 0.1A operating current
- 1mm shaft diameter matched to the 55mm propellers
- Metal motor body with a compact 7mm diameter and 20mm length
- 6mm cable length for direct wiring
- Operating temperature range of -10 to 50 degrees Celsius
Specifications Explained
The 720 motor designation refers to a brushed coreless-style motor built for small drones. Its 7mm diameter and 20mm length keep weight low, which matters on micro frames. The 1mm shaft is the mounting point for the 55mm propellers, so the two parts are designed to work together.
Rated voltage of 3.7V corresponds to a single lithium cell, and the 0.1A operating current indicates a modest draw. The 50000 and 48000 RPM figures describe the high-speed, low-torque character of these motors, so they suit light propellers rather than large ones. The -10 to 50 degrees Celsius range covers typical indoor and mild outdoor conditions.
Compatibility and Requirements
The motors are intended for small multirotor frames in the 100mm class and pair with the included 55mm propellers. Wiring is colour-coded: red and blue leads mark the CW motor, while black and white leads mark the CCW motor. A 3.7V power source and a suitable brushed flight controller or ESC are required but not included.
Typical Uses
These parts suit indoor racing drone builds, micro quadcopter projects, and repairs or refreshes of existing small drones. They are also a reasonable choice for hobbyists who want to learn how brushed motors and propellers work together before moving to larger builds.
What's in the Box
- 2 x 720 brushed motor, CW rotation
- 2 x 720 brushed motor, CCW rotation
- 2 x 55mm blade propellers (one red, one black)
Quick specs
- Motor Type
- Brushed motor
- Rated Speed (RPM)
- 50000, 48000
- Rated Voltage (VDC)
- 3.7
- Operating Current (A)
- 0.1
- Operating Temperature (°C)
- -10 to 50
- Shaft Diameter
- 1 mm















