Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A set of 55mm two-blade glass fiber nylon propellers for micro quadcopters with 6x15mm, 7x20mm or 8.5x20mm coreless motors. They weigh about 2 grams each and come as red and black pairs for easy direction checks.

Key Highlights

  • 55mm diameter and two-blade layout for small micro quad builds
  • Glass fiber nylon material balances stiffness with crash resilience
  • 2.9mm shaft bore suits 1mm-shaft coreless and brushed motors
  • Roughly 2 grams per propeller keeps rotating mass low
  • Red and black pairs make rotation direction easy to identify
  • Fits 90mm to 150mm DIY micro quadcopter frame kits

Ideal For

  • Builders of 90mm to 150mm DIY micro quadcopter frames
  • Pilots using 6x15mm, 7x20mm or 8.5x20mm coreless motors
  • Hobbyists maintaining 1mm-shaft brushed motor micro quads
  • New builders who want colour-coded spare propellers

Buying Tip

Check that your motor shaft is 1mm and that your frame accepts 55mm two-blade propellers before ordering, since these are sized for small micro builds only.

Elecvora expert review

Our verdict

A sensible spare set for micro quad builders who already run compatible coreless or brushed motors. The colour-coded pairs and low weight make them easy to fit and identify, though they are limited to small 1mm-shaft setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at about 2 grams per propeller
  • Glass fiber nylon construction
  • Red and black pairs simplify direction checks
  • Fits several common micro motor sizes

Cons

  • Only suited to 1mm-shaft micro motors
  • No performance data or thrust figures provided
  • Unbranded, so buyers should inspect each blade on arrival

Best for

Micro quadcopter builders needing lightweight replacement or spare propellers

Not ideal for

Larger drones or motors with shafts other than 1mm

Specifications

Prop. Diameter (inch)2.2
MaterialGlass Fiber Nylon
ColorRed, Black
No. of Blades2
Shaft Diameter2.9 mm
Blade Width (mm)8
Length (mm)55
Weight (g)2
Shipping Weight0.02 kg
Shipping Dimensions7 × 5 × 2 cm

What's in the box

  • 2 x 55mm clockwise blade propellers (one red, one black)
  • 2 x 55mm counter-clockwise blade propellers (one red, one black)

Frequently Asked Questions

What motor sizes do these propellers fit?
They are listed for 1mm shaft diameter coreless motors in 7x16mm, 7x20mm and 8.5x20mm sizes, plus 6x15mm brushed motors and N20, M20 and N30 carbon brush motors.
How many propellers are included?
You receive four propellers in total: two clockwise and two counter-clockwise, with one red and one black in each direction.
What is the shaft bore size?
The shaft diameter is 2.9mm, intended for the 1mm motor shafts listed in the compatibility details.
Can I use these on a larger quadcopter?
No, they are intended for 90mm to 150mm DIY micro quadcopter frames and small coreless or brushed motors.
How much does each propeller weigh?
Each propeller weighs approximately 2 grams.
What should I do after a crash?
Inspect each blade for cracks, bends or imbalance and replace any damaged propeller before flying again.

Overview

These 55mm propellers are aimed at builders of very small DIY quadcopters who need a simple, lightweight replacement or spare set. Each propeller is 2.2 inches in diameter, has two blades and is moulded from glass fiber nylon. At about 2 grams per propeller, they add little mass to a micro build, which helps keep motor response crisp on small coreless setups.

The package contains two pairs: one red propeller and one black propeller in clockwise rotation, plus one red and one black in counter-clockwise rotation. That colour split is handy during assembly and repairs, because you can confirm rotation direction without measuring or guessing.

Key Features

  • Two-blade design: a simple, lightweight layout suited to micro quadcopters.
  • Glass fiber nylon build: a stiff material chosen for small propellers that may see contact with obstacles.
  • Colour-coded pairs: red and black blades make clockwise and counter-clockwise positions easy to tell apart.
  • Low weight: approximately 2 grams per propeller.
  • Compact footprint: 55mm diameter and 8mm blade width fit small frames.

Specifications Explained

The 2.2-inch diameter and 55mm length describe the same overall size, so check your frame and motor combination before ordering. A 2.9mm shaft bore is intended for the 1mm shaft diameter motors listed in the compatibility notes below. Blade width is 8mm, which is a typical proportion for a small two-blade propeller.

Because each propeller weighs only about 2 grams, the pair adds very little rotating mass. That matters on micro quadcopters, where small weight changes can affect how the craft feels in the air. The glass fiber nylon material is the same family used for many small propellers, offering a balance between rigidity and the ability to survive minor impacts.

Compatibility and Requirements

These propellers are intended for 90mm to 150mm DIY micro quadcopter frame kits. They fit 1mm shaft diameter carbon brush motors including N20, M20 and N30, and 1mm shaft diameter coreless motors in 7x16mm, 7x20mm and 8.5x20mm sizes. They are also listed as compatible with 6x15mm brushed motors. Confirm your motor shaft diameter and mounting style before fitting.

Typical Uses

Use these propellers on small indoor or backyard micro quadcopters, as replacement blades after a crash, or as spares during tuning and test flights. The colour pairs also help when teaching new builders how to identify motor rotation direction.

What's in the Box

  • 2 x 55mm clockwise blade propellers (one red, one black)
  • 2 x 55mm counter-clockwise blade propellers (one red, one black)

Quick specs

Prop. Diameter (inch)
2.2
Material
Glass Fiber Nylon
Color
Red, Black
No. of Blades
2
Shaft Diameter
2.9 mm
Blade Width (mm)
8
See all specifications