
1 / 4 · Click to enlarge
AI Summary
A set of four 615 coreless motors (2 CW, 2 CCW) for micro quadcopters, rated 38000 RPM at 3.7V. They are compact, lightweight, and fit 2 to 2.5 inch propellers, making them ideal for small 1S builds.
Key Highlights
- Includes two CW and two CCW motors for a complete micro quad setup
- High-speed 38000 RPM rating at 3.7 V for responsive micro flight
- Compact 6 mm diameter and 15 mm length fit tight frames
- 0.8 mm shaft compatible with 2 to 2.5 inch propellers
- Lightweight metal construction with 60 mm cables
- Operates on 1S LiPo voltage for simple builds
Ideal For
- Hobbyists building a 100 mm class micro quadcopter
- Beginners learning basic multirotor assembly
- Makers replacing worn motors in a micro brushed drone
- DIY enthusiasts experimenting with small multirotor designs
- FPV pilots flying lightweight indoor micro quads
Buying Tip
Check that your frame and propellers accept a 0.8 mm shaft and 6 mm motor diameter before ordering, and confirm your flight controller supports brushed motor outputs.
Elecvora expert review
Our verdict
This 615 coreless motor set offers a convenient way to equip a micro quadcopter with matched CW and CCW motors. It is a good choice for small, lightweight builds where high RPM and low weight are priorities.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes two CW and two CCW motors for a complete set
- High 38000 RPM speed suitable for micro quads
- Compact and lightweight design
- Clear color-coded wiring for rotation direction
Cons
- Low torque limits propeller size and load
- Requires soldering to connect to the flight board
- No connectors or mounting hardware included
Best for
Micro quadcopter builders using 1S power and 2 to 2.5 inch propellers
Not ideal for
Larger multirotors or high-thrust applications requiring more torque
Specifications
| Rated Speed (RPM) | 38000 |
|---|---|
| Rated Voltage (VDC) | 3.7 |
| Rated Load Current (mA) | 580 |
| Operating Temperature (°C) | -20 to 60 |
| Shaft Diameter | 0.8 mm |
| Compatible Prop (inch) | 2 ~ 2.5 |
| Color | Silver |
| Motor Material | Metal |
| Motor diameter (mm) | 6 |
| Motor Length (mm) | 15 |
| Cable Length | 60 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 15 × 10 × 6 cm |
What's in the box
- 2 x 615 Magnetic Micro Coreless Motor (CW)
- 2 x 615 Magnetic Micro Coreless Motor (CCW)
Frequently Asked Questions
What is included in this motor set?
What battery voltage do these motors require?
Which propellers fit these motors?
How do I know which motor is CW or CCW?
Can I use these motors on any frame?
Do the motors come with connectors?
Overview
The 615 Magnetic Micro Coreless Motor set provides four brushed DC motors for micro quadcopter projects. Two motors rotate clockwise and two rotate counterclockwise, giving you the correct pairings for a four-rotor frame without buying separate direction-specific packs. Each motor is 6 mm in diameter and 15 mm long, with a 0.8 mm shaft and 60 mm cables. The set is aimed at small multirotor designs where low weight and compact size matter.
Key Features
- Complete rotation set: two CW and two CCW motors in one pack.
- High speed: rated for 38000 RPM at 3.7 V.
- Compact and light: metal body measures 6 mm by 15 mm.
- Propeller compatibility: suits 2 to 2.5 inch propellers.
- Simple wiring: 60 mm cables with color-coded leads for rotation direction.
Specifications Explained
The 38000 RPM rating indicates the no-load speed at 3.7 V, which is appropriate for small, lightweight propellers. The 580 mA rated load current gives an idea of the current draw under typical load; ensure your battery and ESC can supply the total current for four motors. The 0.8 mm shaft diameter matches the mounting hole of many 2 to 2.5 inch propellers, but check your prop's bore before fitting. Operating temperature is listed from -20 to 60 °C, so avoid running the motors continuously in conditions that exceed this range. The 1S voltage requirement means these motors are intended for single-cell LiPo setups, not higher voltages.
Compatibility and Requirements
These motors are designed for micro quadcopter frames that accept 6 mm diameter motors, often around the 100 mm class. They require a 1S battery and a brushed flight controller or ESC board that can handle four motors. The 0.8 mm shaft fits propellers with a matching bore, typically 2 to 2.5 inch size. Wiring is straightforward: the red and blue wires indicate CW rotation, while black and white wires indicate CCW rotation. No connectors are included, so you may need to solder the motor leads to your board.
Typical Uses
These motors suit micro quadcopters, tiny indoor flyers, and DIY multirotor experiments. They are also useful for replacing failed motors in compatible micro frames or for building a basic brushed quad to learn about multirotor assembly. Because they are low-torque, high-speed motors, they work best with small, light propellers and lightweight frames.
What's in the Box
- 2 x 615 magnetic micro coreless motor (CW)
- 2 x 615 magnetic micro coreless motor (CCW)
Quick specs
- Rated Speed (RPM)
- 38000
- Rated Voltage (VDC)
- 3.7
- Rated Load Current (mA)
- 580
- Operating Temperature (°C)
- -20 to 60
- Shaft Diameter
- 0.8 mm
- Compatible Prop (inch)
- 2 ~ 2.5















