Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A generic 56nF polyester film capacitor rated 100V with 5% tolerance in a through-hole radial case. Its compact 17 x 12mm body makes it a convenient low-cost choice for general-purpose DC and timing circuits.

Key Highlights

  • 56nF capacitance with 5% tolerance for predictable circuit behaviour
  • 100V DC voltage rating suits many low-voltage designs
  • Polyester film dielectric for general-purpose, low-cost use
  • Through-hole radial mounting for breadboards and PCB assembly
  • Compact 17 x 12mm body weighing about 3 grams each

Ideal For

  • Makers building breadboard prototypes and small DC circuits
  • Students learning about film capacitors and RC timing
  • Technicians doing repair or replacement work on through-hole boards
  • Hobbyists assembling audio and general-purpose electronics projects

Buying Tip

Confirm the 100V rating and 17 x 12mm body size fit your board layout and circuit voltage before ordering, since this is a single through-hole part.

Elecvora expert review

Our verdict

A straightforward, low-cost film capacitor that does a simple job well. It is best treated as a general-purpose part rather than a precision component.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Useful 56nF value for coupling and timing
  • 100V rating gives reasonable headroom
  • 5% tolerance is adequate for non-critical work
  • Compact through-hole body is easy to fit

Cons

  • Generic branding means no detailed datasheet is provided
  • Not intended for precision or high-stability applications
  • Single unit only, so spares must be ordered separately

Best for

General-purpose DC, coupling and timing circuits in hobby and repair work

Not ideal for

Precision or high-stability applications requiring tight specification data

Specifications

ManufacturerGeneric
Capacitance56nF
Voltage Rating (V)100
Tolerance (%)5
Mounting TypeThrough Hole
Length (mm)17
Width (mm)12
Case/PackageRedial
Weight (g)3 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 56nF (0.056uF - 2A563J) 100V Polyester Film Capacitor

Frequently Asked Questions

What is the capacitance of this capacitor?
It is 56nF, which is the same as 0.056uF.
What voltage can it handle?
The rated voltage is 100V. Keep your circuit voltages comfortably below this figure.
How accurate is the value?
The tolerance is 5%, so units should stay close to the stated capacitance.
How is it mounted?
It is a through-hole radial capacitor, so it is inserted into holes and soldered.
How large is the part?
The body measures 17mm in length and 12mm in width, and weighs about 3 grams.
What is included in the package?
One 56nF 100V polyester film capacitor is supplied.

Overview

This generic polyester film capacitor offers a capacitance of 56nF (0.056uF) with a 100V rating and a 5% tolerance. It uses a through-hole radial case measuring 17mm in length and 12mm in width, and each unit weighs approximately 3 grams. Polyester film is a widely used dielectric for everyday electronics, and this part is aimed at buyers who need a simple, affordable capacitor for general-purpose work.

Key Features

  • 56nF capacitance (0.056uF) for coupling, filtering and timing roles
  • 100V rating giving headroom in many low-voltage DC circuits
  • 5% tolerance for reasonably consistent results across units
  • Through-hole radial package that fits standard prototyping boards
  • Compact body at 17mm by 12mm for tight layouts

Specifications Explained

The capacitance value of 56nF sits in the nanofarad range, a common size for signal coupling, simple RC timing and supply decoupling. The 100V rating describes the maximum voltage the part is intended to withstand, so it is sensible to keep working voltages comfortably below that figure. A 5% tolerance means individual capacitors should stay close to the stated value, which helps when matching parts in a circuit. The through-hole radial format has leads spaced for insertion into plated holes, and the 17 x 12mm case is small enough for dense boards while remaining easy to handle during soldering.

Compatibility and Requirements

Because this is a through-hole component, it requires a board or breadboard with matching holes and enough clearance for a 17 x 12mm body. Soldering equipment is needed for permanent installation. The 100V rating should be checked against the voltages present in your circuit before use. No other accessories are supplied with the capacitor.

Typical Uses

Parts like this are often used for DC filtering, signal coupling, tone and timing networks, and general repair or prototyping work. Hobbyists, students and technicians may find it useful in audio projects, small power supplies and educational builds where a low-cost film capacitor is sufficient.

What's in the Box

One 56nF (0.056uF) 100V polyester film capacitor is included.

Quick specs

Manufacturer
Generic
Capacitance
56nF
Voltage Rating (V)
100
Tolerance (%)
5
Mounting Type
Through Hole
Length (mm)
17
See all specifications