Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact five-direction rocker joystick module with set and reset buttons, designed for Arduino, MCU and AVR game projects. Its 2 to 9 VDC range and seven labelled IO pins make wiring into most development boards simple.

Key Highlights

  • Five-direction rocker: up, down, left, right and centre press
  • Extra set and reset buttons on the same compact board
  • Wide 2 to 9 VDC operating voltage range
  • Seven labelled IO pins for straightforward wiring
  • Small 40 x 25 mm footprint weighing roughly 4 g
  • Works as a standalone keypad input for MCU projects

Ideal For

  • Makers building Arduino menu and control panels
  • Students learning MCU and AVR input handling
  • Hobbyists designing handheld game prototypes
  • Developers needing a compact five-direction keypad input

Buying Tip

Check that your board has enough free IO pins for every direction and button you want to use, since each one needs its own pin.

Elecvora expert review

Our verdict

A practical little module for anyone who needs directional input without designing a switch circuit from scratch. The labelled pins and wide voltage range make it easy to drop into Arduino and AVR builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Five directions plus set and reset on one board
  • Wide 2 to 9 VDC supply range
  • Clearly labelled seven-pin breakout
  • Very small and light at 40 x 25 mm and 4 g

Cons

  • No cables or headers included
  • Requires free IO pins for each function used
  • Mechanical switch, so debounce handling is advisable

Best for

Arduino and AVR makers needing compact directional input

Not ideal for

Projects requiring analog proportional joystick output

Specifications

Item TypeElectronic Switch
Operating Voltage (VDC)2 to 9
Operating Temperature (°C)40 to 85
Length (mm)40
Width (mm)25
Weight (g)4
Shipping Weight0.005 kg
Shipping Dimensions6.7 × 5 × 1.2 cm

What's in the box

  • 1 x Five Direction Navigation Button Module

Frequently Asked Questions

What directions does this module support?
It supports up, down, left, right and a centre press, plus separate set and reset buttons.
What voltage does it need?
The module operates from 2 to 9 VDC, so it can usually share your development board's supply.
How many IO pins do I need?
Each direction and button you use needs its own IO pin, so plan for up to seven free pins.
Is it compatible with Arduino?
Yes, it is intended for Arduino, MCU and AVR game projects, and the labelled pins connect to standard IO.
Are cables included?
No, the package contains the navigation button module only, so you will need your own jumper leads or solder.
How should I handle button bounce?
Add simple debounce logic in your sketch so each press registers once and menu navigation stays stable.

Overview

The Generic 5D Rocker Joystick is a small electronic switch module that adds five-direction navigation to microcontroller builds. Tilt the rocker for up, down, left and right, press it in the centre, and use the separate set and reset buttons for menu or game actions. The board is only 40 mm long, 25 mm wide and about 4 g, so it suits handheld controllers and tight enclosures.

Key Features

  • Five directions plus two buttons: up, down, left, right, centre press, set and reset on one board.
  • Wide voltage range: operates from 2 to 9 VDC, matching many MCU development boards.
  • Clear pinout: COM, UP, DWN, LFT, RHT, MID, SET and RST are labelled for quick hookup.
  • Lightweight: roughly 4 g, so it will not weigh down a handheld build.

Specifications Explained

The 2 to 9 VDC operating voltage is the headline figure. It gives you flexibility to power the module from the same supply as your microcontroller rather than adding a separate regulator. The 40 to 85 °C operating temperature covers normal indoor and workshop conditions.

With a 40 x 25 mm board and a 4 g weight, the module is easy to mount on a faceplate or inside a project case. The common terminal can be tied to VCC or GND depending on how you read the direction pins in your code.

Compatibility and Requirements

The module is intended for Arduino, MCU and AVR game projects. It needs free IO pins on your development board for each direction and button you plan to use, plus a 2 to 9 VDC supply. Jumper leads or a soldered connection are required; these are not included.

Typical Uses

  • Menu navigation in Arduino projects
  • Directional input for AVR game prototypes
  • Independent keypad input for MCU builds
  • Handheld controller experiments and student projects

What's in the Box

One five-direction navigation button module. No cables or headers are included.

Five Direction Navigation Button Module for MCU AVR Game 5D Rocker Joystick Independent Keyboard for Arduino Joystick Module

Quick specs

Item Type
Electronic Switch
Operating Voltage (VDC)
2 to 9
Operating Temperature (°C)
40 to 85
Length (mm)
40
Width (mm)
25
Weight (g)
4
See all specifications