Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This aluminum collet prop adapter fits 3.17mm motor shafts and holds propellers securely on A2212 brushless motors. Its expandable bore (3.7-4.1mm) and 5mm prop shaft make it a reliable, lightweight solution for drone and RC plane builds.

Key Highlights

  • Aluminum construction resists rust and stains
  • Collet design securely grips 3.17mm motor shafts
  • Bore diameter expands from 3.7mm to 4.1mm
  • 5mm prop shaft suits many standard propellers
  • Weighs only 3 grams for minimal impact
  • Simple installation with basic tools

Ideal For

  • RC hobbyists building quadcopters with A2212 motors
  • Drone enthusiasts replacing worn prop adapters
  • Fixed-wing pilots needing a secure prop mount
  • Beginners assembling their first multi-rotor
  • Maintenance technicians servicing small UAVs

Buying Tip

Check that your motor shaft is 3.17mm and your propeller has a 5mm mounting hole before ordering.

Elecvora expert review

Our verdict

A simple, effective prop adapter that does its job without fuss. The aluminum construction and collet design provide a secure hold for 3.17mm shafts, and the light weight is a bonus for small aircraft.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at only 3 grams
  • Rust-resistant aluminum
  • Expandable bore accommodates slight shaft variations
  • Easy to install with basic tools

Cons

  • Requires careful tightening to avoid slipping
  • Not suitable for shafts larger than 4.1mm
  • Propeller nut not included

Best for

Pilots using A2212 or similar 3.17mm shaft motors who need a reliable prop mount.

Not ideal for

Motors with shafts larger than 4.1mm or propellers with mounting holes other than 5mm.

Specifications

MaterialAluminium
Bore Diameter [B] (mm)3.7mm(expandable up to 4.1mm)
Shaft Diameter3.17
Prop Shaft (mm)5
Weight (g)3
Shipping Weight0.02 kg
Shipping Dimensions6 × 4 × 2 cm

What's in the box

  • 1 x A2212 Motor Prop Adapter (Collet Type)

Frequently Asked Questions

What motor shaft size does this adapter fit?
It is designed for 3.17mm shafts, with a bore that can expand from 3.7mm to 4.1mm to accommodate slight variations.
What propeller hole size is compatible?
The prop shaft is 5mm in diameter, so it fits propellers with a 5mm mounting hole.
Is any hardware included?
The package includes only the prop adapter. You will need to use your existing motor mount and propeller nut if required.
How much does the adapter weigh?
It weighs approximately 3 grams, making it suitable for weight-sensitive models.
Can I use this on a motor with a 4mm shaft?
The bore can expand up to 4.1mm, so a 4mm shaft may fit, but it is primarily intended for 3.17mm shafts. Always check for a secure fit.
How should I maintain the adapter?
Keep it clean and dry. Inspect regularly for wear or deformation, and replace if the collet no longer grips securely.

Overview

The A2212 Motor Prop Adapter (Collet Type) is a precision accessory designed to mount propellers onto brushless motors with a 3.17mm shaft. Its collet mechanism compresses around the shaft when tightened, providing a firm and centered hold that helps reduce vibration. Made from aluminum, the adapter is lightweight yet durable, and it resists rust and stains for long-term use. The bore diameter is 3.7mm and can expand up to 4.1mm, offering a small margin of flexibility for different shaft tolerances. With a 5mm prop shaft, it fits a wide range of propellers commonly used in RC aircraft. Weighing just 3 grams, it adds negligible weight to your model, which is especially important for small drones and park flyers. This adapter is a practical choice for hobbyists who need a reliable connection between motor and propeller without complex modifications.

Key Features

  • Aluminum build: Lightweight, strong, and resistant to rust and stains.
  • Collet clamping: Tightens evenly around the motor shaft for a secure grip.
  • Expandable bore: Fits shafts from 3.7mm up to 4.1mm.
  • 5mm prop shaft: Compatible with many standard prop hub sizes.
  • Ultra-light: Only 3 grams, minimizing impact on flight performance.

Specifications Explained

The bore diameter of 3.7mm (expandable to 4.1mm) refers to the opening that slides over the motor shaft. A 3.17mm shaft is common on A2212 motors, and the collet will compress to grip it securely. The 5mm prop shaft is the threaded portion where the propeller sits; it matches propellers with a 5mm mounting hole. The aluminum material keeps the adapter light and corrosion-resistant, while the 3-gram weight ensures it won't upset the balance of your aircraft. These specifications make the adapter suitable for a variety of small to medium electric RC models.

Compatibility and Requirements

This adapter is intended for brushless motors with a 3.17mm shaft, such as the A2212 series. It requires a propeller with a 5mm mounting hole. No additional hardware is included, so you will need the existing motor mount and a suitable prop nut or spinner if required by your setup. The collet design works best when the shaft is clean and free of burrs. Ensure the adapter is fully seated and tightened before flight.

Typical Uses

Use this prop adapter when building or repairing quadcopters, multi-rotor drones, and fixed-wing RC airplanes that use 3.17mm shaft motors. It is also handy for replacing lost or damaged adapters on existing models. The lightweight design suits small frames where every gram counts.

What's in the Box

1 x A2212 Motor Prop Adapter (Collet Type).

Quick specs

Material
Aluminium
Bore Diameter [B] (mm)
3.7mm(expandable up to 4.1mm)
Shaft Diameter
3.17
Prop Shaft (mm)
5
Weight (g)
3
Shipping Weight
0.02 kg
See all specifications