Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 24V AC/DC LED panel indicator for showing circuit breaker, switch or door position on control panels. It fits a 21mm mounting hole with a 28mm head and carries an IP65 rating.

Key Highlights

  • AC/DC 24V operating voltage for common control-panel supplies
  • Low current consumption of 20mA or less
  • 28mm head fits a 21mm panel mounting hole
  • IP65 protection rating on the indicator
  • Durable plastic body weighing only 27g
  • Simple lead-wire connection for fast installation

Ideal For

  • Control panel builders working with 24V circuits
  • Maintenance technicians servicing equipment panels
  • Rail and transport door status signalling
  • Equipment integrators needing status lamps
  • Electrical cabinet manufacturers

Buying Tip

Confirm your panel cutout is 21mm and your control supply is 24V AC or DC before ordering, since the indicator is rated for that voltage only.

Elecvora expert review

Our verdict

A practical, low-cost 24V panel indicator that covers breaker and door status signalling with minimal wiring effort. Its IP65 rating and compact size make it a sensible choice for control cabinets.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Works on both AC and DC 24V supplies
  • Very low current draw
  • IP65 protection rating
  • Simple lead-wire connection
  • Compact 28mm head for 21mm cutouts

Cons

  • Rated for 24V only, not multi-voltage
  • No colour specified in the product data
  • Panel cutout must match 21mm exactly

Best for

24V control panels needing breaker or door status lights

Not ideal for

Systems running at voltages other than 24V AC/DC

Specifications

Voltage Rating (V)24
Model No. / NameAD16-22W/D
Operating Voltage (V)AC/DC24V
Current consumption≤20
Body MaterialPlastic
Head Diameter (mm)28
Mounting Hole Diameter (mm)21
Weight (g)27
Protection StandardIP65
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x AC/DC 24V AD16-22W/D LED Circuit Breaker Position Signal Indicator

Frequently Asked Questions

What voltage does this indicator require?
It is rated for AC or DC 24V only. Do not connect it to higher or lower supply voltages.
How much current does it draw?
Current consumption is 20mA or less, so it places very little load on the supply.
What size hole do I need in my panel?
The indicator requires a 21mm mounting hole and has a 28mm head.
What wire should I use for the connection?
The external lead wire accepts hard wire in the 0.75 to 1.5mm2 range.
Is it protected against dust and water?
Yes, the indicator carries an IP65 protection rating.
What is included in the package?
The package contains one AC/DC 24V AD16-22W/D LED circuit breaker position signal indicator.

Overview

The AD16-22W/D is a panel-mounted LED signal indicator built to show the position or status of a circuit breaker, switch or door on control equipment. It operates on AC or DC 24V and uses a high-brightness LED light source, giving a clear visual signal while drawing 20mA or less from the circuit.

With a 28mm head and a 21mm mounting hole, it fits standard panel cutouts and locks in place with a fitting screw. The plastic body keeps the unit light at around 27g, and the IP65 protection rating makes it suitable for panels where dust and splashes are a concern.

Key Features

  • Dual-voltage operation: works on AC or DC 24V supplies.
  • Low power draw: current consumption is 20mA or less.
  • Panel-friendly size: 28mm head, 21mm mounting hole.
  • IP65 protection: rated against dust and water jets on the indicator.
  • Simple wiring: external lead wire connects directly to the circuit.
  • Lightweight build: plastic body at approximately 27g.

Specifications Explained

Voltage and current

The AC/DC 24V rating means the indicator can be used on either an alternating or direct 24V control supply, which covers many industrial and equipment panels. Current consumption of 20mA or less keeps the load on the supply minimal.

Size and mounting

The 28mm head is paired with a 21mm mounting hole, so check your panel cutout before ordering. The fitting screw locks the indicator onto the panel for a secure hold.

Protection and materials

The plastic body is lightweight and the IP65 rating applies to the indicator, making it appropriate for panels exposed to dust and splashing water. The external lead wire accepts hard wire in the 0.75 to 1.5mm2 range and plugs in directly.

Compatibility and Requirements

Use this indicator only with an AC or DC 24V supply. The panel must have a 21mm mounting hole to accept the 28mm head. Wiring should use hard wire of 0.75 to 1.5mm2 for the lead connection. No additional driver or controller is required.

Typical Uses

Common applications include circuit breaker position indication, door open and closed signalling, switch status display on control cabinets, and status lamps on 24V equipment panels.

What's in the Box

One AC/DC 24V AD16-22W/D LED circuit breaker position signal indicator.

Quick specs

Voltage Rating (V)
24
Model No. / Name
AD16-22W/D
Operating Voltage (V)
AC/DC24V
Current consumption
≤20
Body Material
Plastic
Head Diameter (mm)
28
See all specifications