Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact AD620-based amplifier module that boosts microvolt and millivolt signals with adjustable gain from 1.5 to 1000x. It includes zero adjustment and a negative voltage output for dual-supply loads.

Key Highlights

  • AD620 instrumentation amplifier for high precision and linearity
  • Adjustable gain from 1.5 to 1000 times via potentiometer
  • Zero-adjust potentiometer reduces offset and drift
  • Wide 3–12 V DC operating voltage
  • Outputs up to ±10 V and provides -Vin rail
  • Compact 22 × 33 mm board, weighs only 4 g

Ideal For

  • Electronics hobbyists working with low-level sensors
  • Students learning about instrumentation amplifiers
  • Engineers prototyping signal conditioning circuits
  • Makers needing adjustable gain in a small form factor
  • Anyone amplifying microvolt or millivolt signals for measurement

Buying Tip

Remember that the module requires a separate DC power supply (3–12 V) and does not include cables; verify your input signal range and desired gain before ordering.

Elecvora expert review

Our verdict

The AD620 module offers a practical way to amplify tiny signals with good precision and adjustable gain. Its compact size and zero adjustment make it a handy tool for sensor interfacing, though it requires some basic electronics knowledge to use effectively.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High precision and linearity from AD620 IC
  • Wide adjustable gain range (1.5–1000x)
  • Zero adjustment for improved accuracy
  • Integrated negative voltage output
  • Small and lightweight

Cons

  • Requires external power supply and wiring
  • No enclosure or cables included
  • Limited documentation on maximum output current

Best for

Sensor signal amplification in prototyping and education

Not ideal for

High-power audio amplification or applications requiring certified isolation

Specifications

Operating Voltage (VDC)3 ~ 12
Length (mm)22
Width (mm)33
Weight (g)4
Shipping Weight0.005 kg
Shipping Dimensions5 × 7 × 2 cm

What's in the box

  • 1 x AD620 Microvolt/Millivolt Voltage Amplifier Module
  • 2 x 4 Pin Male Header

Frequently Asked Questions

What is the maximum gain of this module?
The gain is adjustable from 1.5 to 1000 times using the onboard potentiometer.
Can this module amplify both AC and DC signals?
Yes, it is designed to amplify both AC and DC signals in the microvolt to millivolt range.
What power supply does it need?
It operates from a DC voltage between 3 V and 12 V. A suitable power supply is not included.
What is the purpose of the negative voltage output?
The -Vin output (derived from the 7660A chip) can be used to power other dual-supply loads in your circuit.
Does the package include headers?
Yes, two 4-pin male headers are included for soldering to the board.
How do I adjust the zero point?
With no input signal, turn the zero potentiometer until the output voltage reads as close to zero as possible.

Overview

The AD620 Microvolt/Millivolt Voltage Amplifier Module is a ready-to-use signal conditioning board designed around the AD620 instrumentation amplifier. It is intended for amplifying very small voltages—from microvolts to millivolts—with better precision and linearity than common op-amp alternatives such as the LM358. The board includes two potentiometers: one for setting gain and one for zero adjustment, allowing users to fine-tune the output for accurate measurements. With a supply range of 3 to 12 V DC and an output capability of up to ±10 V, it suits a variety of low-level signal applications. The integrated 7660A negative voltage chip generates a -Vin rail, which can be used to power other dual-supply loads in your circuit.

Key Features

  • High-precision amplification: The AD620 IC provides stable amplification of microvolt and millivolt signals.
  • Adjustable gain: A single potentiometer lets you set the amplification from 1.5x to 1000x.
  • Zero adjustment: A dedicated potentiometer trims the zero point to improve accuracy and minimise drift.
  • Negative voltage output: The onboard 7660A chip outputs -Vin, useful for driving dual-power loads.
  • Compact size: The module measures 22 mm by 33 mm and weighs only 4 g, making it easy to embed in small projects.

Specifications Explained

Operating voltage (3–12 V DC): This is the supply range for the module. It is flexible enough for battery-powered or benchtop use, but always stay within these limits to avoid damage.

Gain range (1.5–1000x): The amplification factor is set by the gain potentiometer. At minimum gain, the output is 1.5 times the input; at maximum, it is 1000 times. This wide range allows you to amplify tiny sensor outputs to usable levels.

Output voltage (±10 V): The module can swing up to ±10 V, depending on the supply and load. This is sufficient for many data acquisition systems and microcontroller inputs (with appropriate scaling).

Zero adjustment: The zero potentiometer compensates for offset voltages, ensuring that a zero input produces a zero output as closely as possible.

Dimensions and weight: At 22 × 33 mm and 4 g, the board is small and light enough for portable and embedded applications.

Compatibility and Requirements

The module requires a DC power supply between 3 and 12 V. It does not include a power supply or connecting cables. Input signals can be AC or DC in the microvolt to millivolt range. The output can be connected to ADCs, multimeters, or other measurement equipment, provided the input impedance and voltage ranges are compatible. The -Vin output can supply negative voltage to other devices that require a dual supply, but the current capacity is not specified—check your load requirements. The package includes two 4-pin male headers for soldering to the board if needed.

Typical Uses

  • Amplifying low-level sensor outputs (e.g., thermocouples, strain gauges, photodiodes) for microcontroller ADCs.
  • Signal conditioning in data acquisition systems.
  • Educational projects demonstrating instrumentation amplifier principles.
  • Audio or low-frequency signal boosting where high gain is needed.
  • Prototyping dual-supply circuits using the -Vin output.

What's in the Box

  • 1 × AD620 Microvolt/Millivolt Voltage Amplifier Module
  • 2 × 4-pin male headers

Quick specs

Operating Voltage (VDC)
3 ~ 12
Length (mm)
22
Width (mm)
33
Weight (g)
4
Shipping Weight
0.005 kg
Shipping Dimensions
5 × 7 × 2 cm
See all specifications