
1 / 2 · Click to enlarge
At a glance
This audio amplifier module is a good fit for makers, students and electronics hobbyists. Main specs: item type Amplifier Board; model no. / name AD828; operating voltage (vdc) DC 3.8 – 15. Check that your power source supplies DC 3.8 – 15 before connecting it.
Key Highlights
- Item Type: Amplifier Board
- Model No. / Name: AD828
- Operating Voltage (VDC): DC 3.8 – 15
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Amplifier Board |
|---|---|
| Model No. / Name | AD828 |
| Operating Voltage (VDC) | DC 3.8 – 15 |
| No. of Channels | 2 |
| Length (mm) | 25 |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
Overview
The AD828 Operational Amplifier Front Stage Amplifier Board is listed in our audio amplifier module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Amplifier Board (your supply must deliver at least this much current)
- Model No. / Name: AD828
- Operating Voltage (VDC): DC 3.8 – 15 (match this to your power supply; too high a voltage can damage the part)
- No. of Channels: 2
- Length (mm): 25 (measure your mounting space before ordering)
- Shipping Weight: 0.004 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 3 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
AD828 Operational Amplifier Front Stage Amplifier Board is ultra-compact preamplifier board is designed for high-sensitivity sound pickup using a piezoelectric ceramic chip. Ideal for musical instruments like guitars, erhus, and similar acoustic setups, the chip responds to solid-borne vibrations while filtering out airborne noise—minimizing feedback and self-excitation.
AD828 Operational Amplifier Board is built with either a high-fidelity AD828 or TDA1308 audio op-amp, it offers low-voltage operation (3.8V–15V) and a dual-channel design, making it perfect for stereo setups or single-channel applications with noise isolation.
Note: To adjust gain, change resistor R5 (5k–150k Ω). Higher resistance = higher gain. If using a through-hole resistor, remove the original SMD resistor and solder the new one to the reserved pads.Features:
- Solid-Vibration Sensitivity: Piezo ceramic pickup detects vibrations from solid surfaces with high accuracy — ideal for stringed and percussive instruments.
- Noise Reduction: Rejects air-borne sound, reducing environmental noise and preventing feedback or whistling caused by self-excitation.
- Dual Channel Design: Two-channel setup for stereo or dual mono operation; if using only one channel, ground the unused input to avoid signal interference.
- Low Voltage Operation: Optimized for 3.8V–15V DC input; suitable for direct lithium battery use.
- Hi-Fi AD828 Op-Amp: Uses the AD828 "fever-grade" op-amp for low-noise, high-fidelity signal amplification.
- Ultra-Compact Size: Extremely small form factor allows easy installation in confined instrument enclosures or DIY projects.
- Battery or Linear Supply Only: No onboard regulator; must not be used with switching power supplies to avoid noise or interference.
Package Includes:
1 x AD828 Operational Amplifier Front Stage Amplifier BoardQuick specs
- Item Type
- Amplifier Board
- Model No. / Name
- AD828
- Operating Voltage (VDC)
- DC 3.8 – 15
- No. of Channels
- 2
- Length (mm)
- 25
- Shipping Weight
- 0.004 kg













