Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This USB Host Shield adds full-speed USB host capability to Arduino boards using the MAX3421E controller. It lets your Arduino communicate with keyboards, mice, Android devices and other USB peripherals.

Key Highlights

  • MAX3421E USB host controller for full-speed USB 2.0 communication
  • Adds USB host function to Arduino-compatible boards
  • Works with standard 5V and 3.3V-only Arduino boards
  • Supports USB HID devices, Android ADK and USB hubs
  • Compact FR4 PCB measuring 53 x 50 mm
  • Stackable connectors included for soldering

Ideal For

  • Arduino hobbyists adding USB keyboard or mouse input to a project
  • Makers building Android ADK accessory prototypes
  • Students learning USB host communication with microcontrollers
  • Electronics enthusiasts interfacing game controllers with Arduino
  • Developers connecting USB serial devices such as GPS or FTDI modules

Buying Tip

Check that your Arduino board uses the standard shield footprint and be prepared to solder the included stackable connectors and ICSP header before first use.

Elecvora expert review

Our verdict

A practical, no-frills USB host shield that adds useful device compatibility to standard Arduino boards. It requires soldering and library setup, but the MAX3421E controller and broad board support make it a solid choice for USB host experimentation.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • MAX3421E controller handles full-speed USB 2.0 host traffic reliably
  • Works with Uno, Mega, Duemilanove and 3.3V-only boards
  • Supports HID devices, Android ADK and USB hubs
  • Compact 53 x 50 mm FR4 board with stackable connectors included

Cons

  • Stackable connectors and ICSP header must be soldered before use
  • No onboard power regulation for high-current USB devices
  • Requires a compatible USB host library and code setup

Best for

Arduino users who need to connect USB peripherals such as keyboards, game controllers or Android devices

Not ideal for

Users who want a pre-soldered, plug-and-play shield with no assembly

Specifications

Model No. / NameHost Shield
CompatibilityArduino
MaterialFR4
PortUSB
Length (mm)53
Width (mm)50
Shipping Weight0.08 kg
Shipping Dimensions6 × 6 × 3 cm

What's in the box

  • ADK USB Host Shield board
  • Stackable connectors

Frequently Asked Questions

Which Arduino boards does this shield work with?
It is compatible with Arduino Uno, Duemilanove, Mega and Mega 2560 using the standard variant, and also works with 3.3V-only boards such as the Pro Arduino.
Do I need to solder anything?
Yes. The stackable connectors are included but must be soldered to the shield. The 2x3 ICSP connector should be soldered with its female side facing down.
What types of USB devices can I connect?
The shield supports HID devices such as keyboards and mice, game controllers including Wii controllers, Android ADK phones, compatible Canon, Nikon and Powershot cameras, and USB serial devices such as GPS and FTDI modules.
Does the shield provide power to USB devices?
The shield follows the USB host specification and provides power to connected peripherals, but high-current devices may require a powered USB hub for reliable operation.
What is the operating temperature range?
The board is specified to operate from -40°C to +85°C, making it suitable for typical indoor and sheltered outdoor projects.
Is a USB host library required?
Yes. You will need a compatible USB host library for Arduino to communicate with devices. Example sketches for HID and ADK devices are typically provided with such libraries.

Overview

The ADK USB Host Shield is an add-on board that lets an Arduino-compatible microcontroller act as a USB host. Most Arduino boards can only behave as a USB peripheral when connected to a computer; this shield adds the missing host side so your project can control USB devices directly. At the centre of the board is the MAX3421E, a USB host controller that implements the digital and analog circuitry needed for full-speed USB 2.0 host communication. The shield is built on an FR4 printed circuit board measuring 53 mm by 50 mm and is supplied with stackable connectors that you solder before use.

Key Features

  • USB host capability: Turns an Arduino-compatible board into a USB host that can poll and control peripherals.
  • MAX3421E controller: Handles full-speed USB 2.0 host traffic at 12 Mbps and low-speed traffic at 1.5 Mbps.
  • Broad board support: Designed to work with standard dual 5V/3.3V Arduino boards as well as 3.3V-only boards.
  • HID and ADK support: Works with keyboards, mice, game controllers, Android ADK devices and USB hubs.
  • Stackable connectors: Included headers let you stack the shield with other boards once soldered.

Specifications Explained

USB 2.0 full-speed host: The shield complies with USB Specification Revision 2.0 for full-speed host operation at 12 Mbps and low-speed host operation at 1.5 Mbps. This is the speed range used by most keyboards, mice, gamepads and serial adapters, so the shield covers common peripheral types.

MAX3421E controller: This dedicated IC offloads USB timing and signalling from the Arduino, so your sketch can focus on reading device data rather than bit-banging a USB port.

FR4 board, 53 x 50 mm: The fibreglass PCB is rigid and the footprint is compact enough to sit on top of a standard Arduino board without excessive overhang.

Temperature range: The board is specified to operate from -40°C to +85°C, covering typical indoor and sheltered outdoor project environments.

Compatibility and Requirements

The shield is compatible with Arduino boards including the Uno, Duemilanove, Mega and Mega 2560 when using the standard variant. It supports standard dual 5V/3.3V boards and 3.3V-only boards such as the Pro Arduino. The included 2x3 ICSP connector must be soldered with its female side facing down. A USB HUB function is supported, so multiple low-speed devices can be connected through a hub where the host controller permits.

Typical Uses

  • Connecting a USB keyboard or mouse to an Arduino project for input.
  • Reading game controller input, including Wii controllers.
  • Interfacing with Android phones through the Google Android ADK.
  • Triggering or controlling compatible digital SLR cameras from Canon, Nikon and Powershot ranges.
  • Adding USB serial communication for GPS or FTDI devices.

What's in the Box

The package includes the assembled USB Host Shield board and the stackable connectors required for installation. Soldering is required before first use.

Quick specs

Model No. / Name
Host Shield
Compatibility
Arduino
Material
FR4
Port
USB
Length (mm)
53
Width (mm)
50
See all specifications