
1 / 3 · Click to enlarge
AI Summary
A compact I2C breakout carrying the AHT20 temperature and humidity sensor plus the Bosch BMP280 pressure sensor. One module gives you three environmental readings over a simple two-wire interface.
Key Highlights
- AHT20 and BMP280 sensors combined on a single board
- Measures temperature, relative humidity and atmospheric pressure
- Standard I2C interface with fixed addresses for both sensors
- Wide 2.0V to 5V supply range for mixed logic systems
- Low current draw of 0.3mA measuring and 60µA standby
- Compact 15 x 15mm module for tight enclosures
Ideal For
- Makers building Arduino or ESP32 weather stations
- IoT developers adding climate sensing to a node
- Students learning I2C sensor integration
- Home automation users monitoring room conditions
- Greenhouse and smart agriculture hobbyists
Buying Tip
Check which BMP280 I2C address your board uses (0x76 or 0x77) before writing your code, and confirm your host board's logic level matches the supply you plan to use.
Elecvora expert review
Our verdict
A tidy two-in-one environmental breakout that saves wiring and board space when you need temperature, humidity and pressure together. The wide voltage range and low current draw make it easy to drop into most hobby and IoT builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Three measurements from one I2C device pair
- Flexible 2.0V to 5V supply
- Low measuring and standby current
- Small 15 x 15mm footprint
- Documented fixed I2C addresses
Cons
- No header pins or cables included
- Requires a host microcontroller and library setup
- Pressure accuracy depends on stable mounting and airflow
Best for
Arduino, ESP32 and Raspberry Pi environmental sensing projects
Not ideal for
Applications needing calibrated, certified reference-grade measurements
Specifications
| Shipping Weight | 0.005 kg |
|---|---|
| Shipping Dimensions | 5 × 5 × 3 cm |
What's in the box
- 1 x AHT20+BMP280 Temperature Humidity Air Pressure Module
Frequently Asked Questions
What does this module measure?
Which voltage can I use?
What are the I2C addresses?
Is it compatible with Arduino and Raspberry Pi?
What is included in the package?
How should I care for the sensor?
Overview
The AHT20 + BMP280 module bundles two digital environmental sensors onto one small breakout board. The AHT20 from ASAIR handles temperature and relative humidity, while the Bosch BMP280 measures atmospheric pressure. Because both devices communicate over I2C, you only need power, ground and the two bus lines to read all three values from a microcontroller.
The board is built for general embedded work: it accepts anything from 2.0V to 5V, so it can share a 3.3V rail with an ESP32 or a 5V rail with a classic Arduino without extra level shifting. Current consumption is modest, which helps when the module sits in a battery-powered data logger.
Key Features
- Two sensors on one PCB: AHT20 for temperature and humidity, BMP280 for pressure
- I2C interface at up to 400kHz for fast, simple wiring
- Fixed I2C addresses of 0x38 for the AHT20 and 0x76 or 0x77 for the BMP280
- 16-bit resolution on temperature and humidity readings
- Low power: 0.3mA while measuring, 60µA in standby
- Compact 15 x 15mm board that fits small enclosures
Specifications Explained
Accuracy and range
The AHT20 is rated to ±0.3°C and ±2% RH, with a working temperature range of -40°C to +85°C and humidity coverage from 0 to 100% RH. The BMP280 adds pressure from 300 to 1100 hPa at ±1 hPa accuracy, which covers normal weather variation at ground level and most indoor applications.
Power and bus
A 2.0V to 5V input makes the module flexible across logic families. I2C speeds up to 400kHz keep read cycles short, and the separate addresses for each sensor mean both can sit on the same bus without conflict.
Compatibility and Requirements
The module works with any host that provides an I2C bus and a supply within the 2.0V to 5V range, including Arduino, ESP8266, ESP32 and Raspberry Pi boards. You will need a microcontroller or single-board computer, jumper wires and a suitable library for the AHT20 and BMP280. The BMP280 address can be 0x76 or 0x77 depending on the module configuration, so confirm the address in your scan before reading data.
Typical Uses
- Indoor climate and weather logging
- IoT sensor nodes and home automation inputs
- Smart agriculture and greenhouse monitoring
- Educational projects and prototyping with Arduino or Raspberry Pi
What's in the Box
One AHT20 + BMP280 temperature, humidity and air pressure module.













